Search the Community
Showing results for tags 'gas'.
-
with crapy ethanol gas after warm up it wants to die at idle 950 rpm with real gas it wants to idle around 1500 to 2000 rpm when at normal operating temps any ideas oh real possible answers only Yammer Dan an Flyinfool :no-no-no: :rotf:
-
OK i let the bike set up for well since Isaac came through i put some unknowingly bad gas in the tank from a gas can i filled up before the pending visit of Isaac i must have gotten the bottom of the tank i ran some berry mans treatment cleaner in my tank the whole can in the 4 gal. of gas it was running bad lose of power before i got back to the shop that's when i added berry mans and ran it for about 30 min. then shut it down that was Friday i just cranked it and it was still running bad so i drained the tank at the fuel filter the gas was dark yellow like old gas hooked the line back to the pump and cranked it. it was still slow response on throttle all 4 cylinders are firing so i took the air box apart looked in all 4 carbs are spraying gas but slides were not moving i assisted them by moving them with a screwdriver now i have only one not moving on its own could it be the diaphragm any suggestions would be greatly appreciated before i take cover off carb diaphragm and tank has fresh gas the crappy ethanol gas
-
For some idiotic reason I thought I had fouled a plug in my 2007 Venture. As everybody knows, I'm not a mechanic but thanks to the tech section I was able to convince myself that I could change them myself. The reason for the change was the "miss" that I heard in the motor and miss-diagnosed as a fouled plug. So, in less than an hour I had them changed and the bike back together. No special tools, just a Craftsman 18 mm deep socket, a 3/8" swivel, extension, ratchet and a couple allen wrenches. Each plug I pulled I was disappointed that it looked like a new plug - crappola All 4 plugs were in excellent shape, nice light brown, gapped to (I think) 34 thousanths. I didn't have a 34 but I did have a 32 and a 35. Loose 33 and the 35 wouldn't go. Close enough for the girls I date. Got it back together, startedit up - still had a miss. 15 minutes later, some seafoam and fresh gas - I'm just about ready to blame everything on gas that was 2 years old - now, anybody that wants to come down and wake me come on down - bring you're own 2x4 or ball bat, I refuse to take a beating with my own tools
-
This has probably been covered before, but I'd be darned I was able to find it during a search. Here's my problem. This just started on my 83'. I was driving down the road. Nothing special, just normal driving, when all of a sudden everything drops. Tack, engine, everything. Just like I'd hit the "kill switch". I stopped the bike and turned the key on and off, and the bike fired right up. I thought strange! But drove on down the road. Stopped to get some gas. When I turned the key to start the bike again, everything powered on...but when I hit the starter button...NOTHING!! Now keep in mind that all the lights on the dash are on. I can hear the gas pump do its thing. I checked all the fuses (yes its an old fuse box) but they were all good. I have a Delka (sp?) battery in the bike. I've installed the heavier battery cables too. New spark plugs also. Yes, I have plenty of gas. I then kept wiggling the "Kill switch" back and forth hoping that this would make a difference. (This is were I read something on the forum, but can't find the article now) Still nothing worked. I then put the kick stand up and down a few times hoing that maybe that would make a difference. Well, long story short...the bike finally turned over. I don't know exactly what worked though. So any ideas would be great! I'm a bit scared to take her out for a ride again, since I felt like I was lucky to get her home. I've since went back out to the garage and she's still starting OK. But that's a pretty scary feeling not even getting a buzz or anything. Thanks, Jack
-
I finally got home from over the pond and decided with all the warm dry weather to get the 1st gen out. Guess what? it wouldn't run without the choke on. If I tried to rev it up it just died. Bit of history, 86 Venture Royale. 36,000 miles, stock with the exceptions of upgraded fuse block, I put the aftermarket CDI box on it (bought through Dingy). Progressive springs, fork brace. After all the mods last year, I rode it for 18 miles and it ran great. I drained the carbs, put stabil in the gas and it sat until today. I drained the old gas out of the tank and put new in replaced the fuel filter, and tried to fire it up it wouldnt run without the choke on. Today I pulled the carbs, and cleaned them fully, I did find one of the little plugs in the carb on the bottom of the main jet block kind of looking mushy. ( they were new a year ago with a full carb overhaul. (Done by a carb re-builder) I replaced it with a new one from a kit I had left over. I tried it again and the same thing. Pulled the carbs again and made sure everything was good. The diaphrams are new last year, I replaced the plugs, checked for vacuum leaks and bad plug wires didn't find anything wrong. It still wont run without full choke. I even put the known good stock CDI box on and tried it. Still don't work. I am out of ideas to find the problem. I dont use the gas with the ethonol in it. can anyone help? rjjammer -
So I know it is somewhat of a common problem on our 1st Gens. They are just so dang fast the gas fumes in the tank cannot keep up with the bikes. My bike has developed the “gas smell in the garage” syndrome. It seems to be getting worse. I have checked the diaphragms, checked for overflow from the carbs. Adjusted the idle screws. Trying to decide the next step. So, what are the solutions that you guys have found ? What is the next couple of steps I should try ?
-
Rode my 1st gen to work today, i'ts first long ride and noticed a load whine every time i got off the gas. Fast or slow clutch in or out. Sounds like i'ts coming from the left side. The bike runs and shifts very good except for this whine. Goes away while on the gas. Anybody had this issuse?
-
Something is wrong with my fuel gauge readings on my '06 Midnight Venture. I had the bike serviced by my local Yamaha Dealer. New plugs etc so the tank had to come off. (First Time Ever) I drove the bike for a few days after getting it back. The fuel gauge was on 1 bar left and the Low Fuel Warning Indicator came on. Always used to come on with 2 bars on the fuel gauge. Anyway, I pulled over and switched the petcock to reserve. I got about 2 miles and the bike ran out of gas. Never did that before. Got some gas from a generous nearby homeowner then filled the tank at the nearest gas station. Ran the tank down over the next few days and the indicator came on when I reached 2 bars on the fuel gauge. I pulled into a gas station not very far away (maybe 2 miles). Filled the tank and it only took 4 gallons.??? Being very confused, I decided to take the bike back to the dealer to have them check it out. $103.00 later, they said that nothing was wrong and everything worked as it should. This particular would never admit to anything as I have found out from other riders. I have ridden the bike bike for several months now not really sure how much is in my tank except when it's first filled. I went on a long ride through the mountains this past weekend with my main squeeze. I have to say it was beautiful. On the way home the Fuel Indicator light came on and 2 bars on the gauge, so I pulled into a gas station and filled it up. It only took 3 1/2 gallons. Huh? Anybody else run into this? The local dealer is not the place I want to take it to ever again. How many bars do you people have left on your gauge when your Low Fuel Indicator comes on? How much fuel does it take to refill your tank if you refill immediately once you see the indicator? Is there a way to replace the gauge in the tank? Thanks.
-
Just a heads up. I went down to look at the new gas cans that are contoured to fit into the saddlebag of a Harley. Really nice plastic cans sloped on one side to fit the shape of a saddlebag. But the lid of my Venture would not close with this can inside. So make sure you test before you buy. Mike
-
I'm gonna change my spark plugs myself. Looking at that project closely, It appears I might have to raise the gas tank to get to the front two plugs, Am I thinking right? -
.thumb.jpg.86b14ff76d3485995b1240269d027bfc.jpg)
Been awhile since I've been on the forum. Been around since late 2004 when this all started. Have a 2005 RSV Speedometer, odometer, trip meters and and gas gauge all work. Cept at night its all in the dark. heard tell a new unit is $1K....can this be right and is there other solution. I've not pulled the fairing yet. Thought I'd get some feedback from one and all first. Also is there a fuse just for the LCD illumination back segments? thanks Jim -
Bike feels like it's running out of gas at mid to high RPM. I took the fuel pump off and tested it to see if it was pumping fuel. I put the intake hose in a container of fuel and the outlet side above the same container and turned the key on. The pump will run and pump gas but will only run for approx. 5 seconds and then stop. If I turn the key off and turn it back on...the pump will again run and pump gas for 5 seconds and stop again. I this normal?? Mark
-
Went to start the bike today & don't know why but I turned the key on/off multiple times. Each time I noticed the fuel pump kicking in. I did it a dozen times in a row & the pump ran each time. Then I smelled gas & found that the right front carb had gas leaking around it (overflow?). After awhile I hit the start button for a couple seconds & it didn't start luckily. But I got pretty concerned when I saw gas coming out of the right exhaust pipe back by the rear wheel. WTF?! Is that normal even if the float is stuck? What to do now?
-
I've been "storing" the daughter's boyfriend's 2002 (or maybe it's 2003) VTX1300 for the past 3 years. Before that, it sat for a couple years in underground storage. I had it running 3 years ago but since then, not. Uncovered it yesterday and found that the gas tank was quite rusty inside, carb is all gummed up as well as the petcock. It's got rust on the spoke wheels and the buddy seat mounting bolts aren't original (somebody has been messing with this bike). There's a few scratches in the paint on the rear fender. It ran fine when I had it running. I'd changed the oil and spark plugs, put a new battery in it, fresh gas, and it fired right up and seemed to run fine driving it around the neighborhood ... (that was 3 years ago). Anyhoo ... I figgure it needs a fair amount of TLC to get it back into roadworthy condition. So, my question is, what do ya'll think it's worth as it sits? I'm contemplating buying it from him and fixing it up but I don't want to invest more than I can get back out of it.
-
I've done numerous searches but much to my surprise I can't seem to find much on the actual fuel range of the RSTD. I realize it will vary depending on a number of issues but I'm trying to get an idea. I always seem to be stopping for gas while on a trip but maybe it's the nature of the beast. Anyway, on a full tank of gas, how far can you go. thanks Greg
-
Yesterday was a real nice day. When I got home from work I was asked why I was so late, My answer was that the bike needed gas, even though I bought gas the day before. So then there were some letters that had to be postmarked that day so I jumped on the bike for the 1 mile trip to the post office. 3 hours later I got home.......... The house was dark, the boss had gone to bed already. For some reason I needed gas again on the way in to work today......... I don't know how that happens....... I was still getting dirty looks this morning as I was getting ready for work. But I feel so much better. I might just need more gas to get home today........
-
My 2007 RSV is leaking gas (a huge understatement) from the front of the bike after sitting up for a while. I had surgery on my knee last year around June 1st and could not ride till March of this year. I had another surgery this June 1st and it went much better than the previous one. Anyway, I started the bike last month as I try to start it once every month or 2 when it sits up, with no problem. I went out today to start it up, it started, but gas came pouring out. I can't be sure where exactly, but it shouldn't be a freeze plug as the winter here was very mild this year and I had ridden since. I am not really handy with tools and am planning on bringing it to the shop, but wanted to have an idea as to what I was looking at having done. TIA Joe:bighug:
-
The day was just too nice and the VR was rockin. I got home 120 miles later! Looking outside, today looks pretty good too. hmmmmm...I need more gas http://www.raymondstacy.com/vr.jpg
-
Yesterday after mowing my yard, I thought I'd take a short ride and cool off. I hadn't had a chance to ride my '83 VR in a few days so I dicided to take it instead of my 1100. After about 20 miles, I was getting ready to head home. I was going to stop and fill up with gas before I went home. I showed 84 miles on that tank of gas and my fuel gauge showed 2 bars. About a mile from the store I was going to stop at to full up, I notice the bike slowing down. I gave it some throtle and nothing happened. I pulled off the side of the road. I tried to start it again but no luck. I checked to make sure I hadn't hit the kill switch and it was on. Everything electrical seemed to be working and it turned over fine. The only thing I could think of was that it was out of gas. I called a friend and he brought me a gallon of gas. After pouring it in, I cranked on it for a couple of minutes and it started. When I stopped to put gas in, it only held 1.9 gals. So I know it hadn't run out of gas. I rode the rest of the way home, about 10 miles and everything seemed fine. I really don't know what happened. I don't think it was an electrical problem because as I was trying to start it, it sounded like it would after running out of gas. It would try to hit severl times until it finally picked up the fuel and started. Is it possible that I had some trash in the tank that plugged the fuel pick-up?
-
I have just pick up a 1983 venture xvz12. I found out that it has a few problems. 1st is the elect fuse box is done , some of round fuse clamps are gone and someone has tried to repair it and wires are taped and spliced together. 2nd is there is the red warning light flashing . 3rd the computer monitor has the battery, brake fluid and head light indicator on. 4th I am getting about 60 miles to a tank of gas and i smell gas when I stop and today it made ao popping are a back fire sound down around the carbs going down the road. 5th The consoles are split are cracked. 6th the paint is faded and some of the fairing tabs are brokin off. I sure could use some help and guidance because I dont have any idea where to start to fix all this. -
I have a generator which runs on LP or NG. Can it be used on raw wellhead gas like we have run into the house for cooking and heat. We are filtering the water at the pipeline tap but still the gas has some water vapor. Is anybody doing or done this? Is it possible or should I stick with LP for the generator? The well is located on my property so we are the first customer and free gas.
-
So here's the story relating to my 88. When I first got it I needed 1/2 choke just to keep it running. MARCARL and I cleaned out every oriface possible with the carbs still on the bike with carb cleaner and compressed air. We set it up best he could and since then I have seafoamed it with a very strong mixture overnight a few times, and add several ounces every 3-4 tanks. Once in a while I put in a heavier dose . It's had at least 8-10 cans thru it. I had a case of a sticky float (I think)on the #3 carb earlier this year as gas was pouring out the overflow tube. But it "fixed" itself when I tapped on the carb body with the handle of a screwdriver (I was on the side of the road at the time). Again...dosed with seafoam and it seemed to be OK for quite a while. Now I'm smelling gas (no overflow) and the idle usually but not always wants to hang up around 2500 rpm. What messes me up is that occasionally it is just fine! (900-1000) I"m finding I don't need any choke to start it. I bought a 2nd carb rack (minus diaphragms and sliders) and I have diaphragms and the basic VMAX ebay carb kit. Just wondering if anyone has any suggestions. Even changing out the carb rack would be a major undertaking for my wrenching comfort level so I'd like to wait for off season to do that.
-
We just returned from a vacation trip to Oregon for a week and a half. Jumped on the bike this morning, pulled the choke, and started it up. Trouble is that every time I pushed the choke button in the bike died. I filled the tank up just before we left so the gas is fresh. I figure that either the gas was bad from the gas station or my fuel pump is bad. Bad luck for me!
-
My 1983 venture will stall hear and there, when idles too long cough and weez when giving gas but will rev up. When gas is low wont start very easy. The idle is up and down. Could it be my fuel pump? Watch the fuel filter and gas was popping ever 5 or so seconds.
-
Don't know what gas mileage you'll get, But real cool
