Jump to content

Marcarl

Super Moderators
 View Profile  See their activity

  • Posts

    11,483

  • Joined

  • Days Won

    173

 Content Type 

Everything posted by Marcarl

  1. Marcarl
    Well I solved the problem, sort of. First off I found it really helps to have the throttle stop screw backed off far enough so that it will kill the engine, I did, but the sync screw on #1 was was also backed off too far and so that screwed things up some what. Once I discovered this I was able to get the sync perfect and it ran better but the idle would still hang up when it warmed. So the next thing I did was to adjust the cables to factory spec's, as I was informed, and now it will idle at 900 rpm, but it still hangs up at 1200 rpm, although with a little push on the throttle it idles fine. Don't know quite what to do about this, but someday I will find it and then all will be well. As it is, I ride and enjoy.
  2. Marcarl
    Keep it up for we are right on your tail, 38 next month. Looks like you're enjoying it as much as we are. CONGRATS Marcarl
  3. Marcarl
    If you want to fine the problem, wait for a dry day, warm up the scoot and then start spraying it water from a spray bottle, using a stream, not a spray. Go slowly from place to place and sooner or later something will come up. If that don't work use a water hose, but the problem with the hose is that it tends to cover too muach area at one time to be effective in pin pointing the exact location. It sounds like hight tension wires but could also be in the charging system or electrical system. If it misses, my gues is high tension, but if it starts just running crappy, it could very well be a drain in the electrical.
  4. Marcarl
    Diddo Diddo Diddo Diddo Diddo Diddo
  5. Marcarl
    When I read your problem I thought >coil:stirthepot:
  6. Marcarl
    Insurance, Insurance, Insurance, here's the story. Got my first insurance with Kingsway 2004 approx. $525.00 2005 $625.00 2006 $700.00 2007 $900.00 & some so I got a new agent, Dalton Tiimis from Ancaster at $580.00 also insured through Kingsway. This year they quote $680.00 Riders Plus $659.00 this year So I called the agent that does all the rest of our insurance who said before that they couldn't quote MC and they now do through Economical, but only if you are a long time client $549.00 Nice, it save me $110.00.
  7. Marcarl
    Wow, and I thought we were going to have to wait for days to get this done,,,,YOU ROCK BUDDY. This works faster and better, now don't forget to be employed, we should be secondary to that remember. Carl
  8. Marcarl
    Yep!!!!!!!!!!!!!! It's flat all right
  9. Marcarl
    When humans fail, then God's power can shine. As the others have already done, we will present your case before the throne.
  10. Marcarl
    Better have a big plate of food ready.
  11. Marcarl
    Just come up with the remembering that I have a whole wack of 1157 LED bulb here. Some are from CTC, some are from a local seller, and some are from Super Bright. I haven't been convinced to put any in the tail light. They show up alright for a tail light but the difference for the brake is almost non-exsistant. Night time is better than day time but still does not come anywheres near close to an incadescent, so I'm running incadescent. Maybe I need to change my fuse block, they seem to work fine straight from a 12 volt source (battery charger) but don't perform in the scoot.
  12. Marcarl
    http://www.superbrightleds.com/ All kinds and shipped fast and are as promised. Good Prices
  13. Marcarl
    We're with you Bobby, may He shine on you as usual.
  14. Marcarl
    Something about the penninsula, where ever you ride there are always some nice scenic parts, just don't be stuck to the main travelled areas, You've hit on some of the best though, Now take a trip to the south and west of Kitchener, along the lake to Port Burwell, North of Orangeville and then the Muskokas, just west of Burlington\ Mississauga in the Milton area, Ancaster SourSprings Road on your way through.
  15. Marcarl
    You could try a local auto body repair garage. Or they could maybe send you in the right direction. You could use something maybe not the same but still work anyways. Best of luck.
  16. Marcarl
    Fuel Filter, bet you my bottom dollar, or daller which ever comes first.
  17. Marcarl
    Hey you, will you get that scoot together soon?????? or do I have to come and help out???????? I can bring a large coffee can, that way we'll be done sooner.
  18. Marcarl
    Glad to hear that he's alright physically, but mentally is a question. How much for a used bike???????and how much to repair???????? He's not a Dutchman, I'm sure of that.
  19. Marcarl
    Very nice, now I have to redo mine, another project just got listed:thumbsup2:
  20. Marcarl
    Ah come on, you could have dusted it for him. As for the rest: Diddo what Eck said and don't you go leaving us now, you'll miss being here and not be the same person.
  21. Marcarl
    You took the words right out of my mouth, he wouldn't be in any danger at all, probably come back all blow dried off and warm as well.
  22. Marcarl
    I would like to see those diagrams. When I check out my setup I look for what may constitute a noise suppressor but have difficulties seeing anything but wires and a connector. I really think they are pulling my leg by stating in the manual that there is a noise suppressor in that lineup somewhere.
  23. Marcarl
    Sunrise on Friday or Thursday?
  24. Marcarl
    They don't have pump up shocks then???????
  25. Marcarl
    Now that's an oxymoron: quick 2nd gen:stirthepot:
×
×
  • Create New...