Jump to content

N3FOL

Supporting Member
 View Profile  See their activity

  • Posts

    2,688

  • Joined

  • Last visited

  • Days Won

    45

 Content Type 

Everything posted by N3FOL

  1. N3FOL
    Great information! I am referencing the old number with the new part #. Thanks.
  2. N3FOL
    Very nice site. Thanks for the link.
  3. N3FOL
    Squeeze, Thanks for your input.
  4. N3FOL
    I may check my shifter bolts, saddle bag bolts, etc. tonight. Thanks for the heads up.
  5. N3FOL
    It may be a good idea to add Lithium Soap on the seal before installation...not sure(?). Somebody mentioned that the spline that attaches to the 'pumpkin' does not need to be lubed with Honda Moly60 since it is lubed by the drive shaft gear oil. Is this accurate or not?
  6. N3FOL
    So for the seal, do I need (2) for the front and rear spline area?
  7. N3FOL
    Sounds like this seal may break upon disassembly of the drive shaft. Are the seal on both ends of the Drive Shaft? Do you have a part number that I can order before I start taking my shaft apart in a few months?
  8. N3FOL
    I work at a facility that manufactures Diagnostic equipment for healthcare use and DI water is abundant. I agree, it is a good idea to use DI water in the cooling system to prevent rust build up internally. Did a search on Speed Bleeders. I may go ahead and order Two (2) SB8125; 1 for the Rear Caliper and 1 for the Clutch (not sure of the term) and Two (2) SB7100 for the Front Calipers. I hope I got the part numbers correct for my '07 Venture.
  9. N3FOL
    I am looking in the maintenance manual, but could not find the page. What Chapter? The large plug under the water pump...is thos towards the right side of the engine?
  10. N3FOL
    I was just wondering why a seal was broken...?? Looking at 7-78 of the Maintenance Manual, I see now why the Rear Wheel has to come off......if I am not mistaken the Speedometer Sensor has to come off and then pull on Final Gear Assembly to expose the Drive Shaft after removing 4 bolts (Right?).
  11. N3FOL
    You just made me hungry after looking at the pic. Next time, easy on the cheese.
  12. N3FOL
    Glad to hear that they caught the bad guys. They sure made the time to travel far away (>60 miles) away from home.
  13. N3FOL
    It is hard to go wrong with Vance and Hines. Start on a look out for the brown truck. Let us know how it sounds.
  14. N3FOL
    That is exactly what I put in my cars and the same size bottle is available at our local Autozone store here in SE PA. Thanks, Squidely.
  15. N3FOL
    Yes, that is all you need...one (1) Signal Stabilizer to take care of the Front and Rear. I installed mine under the seat.
  16. N3FOL
    What do you recommend as far as Coolant and Brake Fluid is concerned? Tips on the Coolant change? (will have to consult the Maintenance Manual ) I've seen write-ups on Brake Fluid replacement somewhere...
  17. N3FOL
    I agree with you 100%. Looks like this will be in my agenda for the summer. I guess I can simply put in a 50/50 mixture of Anti-Freeze in the system, right? Prestone, maybe? Brake Fluid...maybe DOT 4 or DOT 5...not sure but I will have to check the manual first. Your offer sounds like a very nice idea:thumbsup2:. Where exactly is Duncansville? I will buy lunch and then ride...
  18. N3FOL
    Hello Earl. Yes, I agree. I do majority of my car maintenance as well and it has saved me tons of money. My main question on my bike is that it is an '07 and the coolant and brake fluid has been in there for almost 2 years now...but I bought this bike brand new last year and it has only 3K+ miles. In your opinion, would you change brake fluid and coolant this year being it has been 2 years already?
  19. N3FOL
    Thanks, Rod. Since my bike will be almost 2 years old and sat at a dealership for most of the time, I may tackle the brake fluid replacement sometime this summer. The coolant may happen after that...before then, I will consult this forum before I go ahead and drain coolant.
  20. N3FOL
    Al, You will be much happier if you install a 'Metric Signal Stabilizer' from Custom Dynamics. Install is pretty easy and you will get the full potential of your LED's blinking at a normal rate.
  21. N3FOL
    I did a search regarding this, but did not find one. I bought my bike last October ('08) with only 1 mile on the odometer. It is an '07. The Service Manual stated to replace coolant and brake fluid every certain # of miles OR 24 Months. I may be closing in on 24 Months, but I only have 3200 miles on the bike. Do I still need to replace Brake Fluid and Coolant this year or Wait until I reach my 2nd anniversary of ownership?
  22. N3FOL
    Welcome to the forum, bendtdj. Lots of folks here that know the Venture very well...it is a great source of information. Congrats on the newly acquired bike.
  23. N3FOL
    Get yourself a No Load Metric Signal Stabilizer. Very easy to install (comes with installation instructions).
  24. N3FOL
    Good Idea. I would probably paint the black face and mounting area the same color as the fairing.
  25. N3FOL
    Good Idea. I would probably paint the black face and mounting area the same color as the fairing.
×
×
  • Create New...