Jump to content

VentureBob

Expired Membership
 View Profile  See their activity

  • Posts

    60

  • Joined

  • Last visited

Everything posted by VentureBob

  1. VentureBob
    1985 VR, started hearing a clappy noise at start up and would quiet down after warmed up. i thought it was the "H" Pipe rattle eveyone complaines about and since it was the end of the season I didnt think too much of it. However I have been going to start the bike up at least once a month and letting it reach operating temp before shutting down. This last time I was starting think maybe my clappy noise was engine related and not exhaust. Below is a link to the video I just shot from a cold start and walk around trying to see if I could pin point where the clappy noise was comming from. I am hoping someone here with more experience is able to recognize the sound and tell me if it's exhaust or engine. I am hopping for exhaust as I plan on doing the HD muffler MOD and weld up the "H" pipe in the early spring. Thanks for your help. please use the link below to see the youtube video. [ame=http://www.youtube.com/watch?v=w9CczUTzayg]YouTube - VID00001[/ame]
  2. VentureBob
    Do a search on Google for "google books". There are lots of free classics to choose from. My daughter uses this for school on her Nook all the time.
  3. VentureBob
    I am interested in Mufflers
  4. VentureBob
    Can these be swapped without pulling the engine?
  5. VentureBob
    I would leave it in the safe at home for this trip.
  6. VentureBob
    If replacing this part means I will be able to run another type of exhaust pipe I am interested.
  7. VentureBob
    Link is not working for me
  8. VentureBob
    Welcome to the site Rentalguy1, I think you will find everything you need here to help you with all your projects and I am sure your to do list will grow some after you look around some more. I look forward to following your progress. Bob
  9. VentureBob
    I took a set off my '85 VR. Not sure if they will fit yours but if you find out they will let me know.
  10. VentureBob
    Condor, let me know how that turns out. I went to Wallyworld and they were out of stock on the XXL covers. I still have a few weeks before needing the cover and I can always order the one fro NewEnough for a few just a few bucks more. It's getting harder and harder keeping my wife convinced this is an inexpensive hobby.
  11. VentureBob
    Thanks I will give this a try.
  12. VentureBob
    Hi folks, this will be my first winter with my '85 VR and I don't have a garage to store her in. I do have a carport and would like to by a good cover. Any suggestions?
  13. VentureBob
    All of this info must be for people who have taken the carbs apart. Not something I have done and don't have a clue on how to check to see if thing are the way the are suppose to be
  14. VentureBob
    Heading out of the office now to go the long way home I will try the old bulb to see if things go back to normal.
  15. VentureBob
    This MOD did not work for me and I was told it could be a bad connection at CMS or bad wire leading to CMS. I have not gone any further into trying to repair it yet as I just want to ride and then work on bike this winter. From reading lots of other posts about this topic it sounds like the 2.2K is the one to go with. Bob
  16. VentureBob
    I just installed my headlamp bulb with a Silver Star Ultra. After install, low beam was dim but high beam was super bright. Now I get the headlamp message on display. After having it in for a week the low beam is not on at all but works on high beam. This morning low beam was on and very bright for a few minutes then went off. High beam still works fine. Did not have any issues with the other unknown bulb that was installed from PO I was surprised to see the wattage to be 55/100 with no name or numbers on bulb just the words not for use in Germany. This is the old bulb. Do you think the Silve Star is defective or my scooter just didnt like me changing out a perfectly good headlamp? I would really like to run with the Silver Star as it is much brighter looking. Maybe with some of your suggestions I can get it to work. Thank you for all of the support this site provides! Bob
  17. VentureBob
    Nice looking scooter even with out the badges. Hope you get a chance to get a few good rides this year.
  18. VentureBob
    http://www.oysterrun.org/ I know this happens every year, but I am more excited this year as I finaly have a scooter to join the fun. We seem to have a few riders out here in the West, maybe we could work something out so we could meet one day. The actual event is offically only on Sunday but folks start rolling into town on Friday. I hope I get the chance to meet some of the great folks from these forums. Bob
  19. VentureBob
    This is the first and only MOD I have done to my '85 VR and WOW it made a huge difference. Best bang for you buck in my opinion.
  20. VentureBob
    Thank you!
  21. VentureBob
    Would someone take a look their first gen center stand and let me know if the spring is compressed or extended while the scooter is on the center stand. I just got the parts in to put the lever arm and spring on so I can use the center stand but not sure which way it goes. The way I think it supposed to go gives me the suspiscion my spring is too long. Thank you, Bob
  22. VentureBob
    I am a fairly new Venture rider myself and I have been having the same issue, but after a few conversations on the forums here I have found that 42-45 in the rear and 11-13 in the front with dampner on 2 for myself and I am at 300lbs. Have not had a passenger on board yet but will move dampner to 4 and rear shock PSI to 50+ when I do. Like many others have said, you will have to play around with it and bit and find what you like based on your style of riding.
  23. VentureBob
    Hello David, is there a part number for the buckeye performance clamps? What is the HD Mod? Any chance you have the specs from the muffler shop of how long and at what angle the bend was on custom made piper?
  24. VentureBob
    When is the Group buy happening? Can I get a link to product line? I might want to look at buying for my truck as well.
  25. VentureBob
    Ok, I am in for a set as well. No rush, we don't want toput to much strain on the healing arm
×
×
  • Create New...