Jump to content

Marcarl

Super Moderators
 View Profile  See their activity

  • Posts

    11,468

  • Joined

  • Days Won

    172

 Content Type 

Everything posted by Marcarl

  1. Marcarl
    This thread started out just fine, but NOW? Hijacked again, must be us!
  2. Marcarl
    As far a 'leaking' seals is concerned, mine leak all the time. The grease used is not what is normally used for wheel bearing grease, but that doesn't matter, it's just ordinary axle grease, and so tends to break down and go to oil. Oil is very hard to contain in a heated pressurized situation such as this, and so I'm quite alright with it that there is a bit of leakage, kind of that is why there are springs in the bearing buddy to keep the bearings full of grease. When you see the bearing buddy recessed, then it is time to add some more grease, and the only reason you need to add more, is because you lost some, and where could you loose it, if not through the seals.
  3. Marcarl
    You should be able to upload right out of the program to the 660. Then when you turn on the 660, you need to go to 'my data' and then 'import data'
  4. Marcarl
    Next time try the Canadian Tire in Brantford,,,,, but have some time on your hands, for you'll argue all day,, and then walk away empty handed.
  5. Marcarl
    Wizard765 told me he has them, so check with him.
  6. Marcarl
    Sync the carbs from scatch, meaning that you put all the butterflies to fully closed position and then start adjusting them, need some help with that? post again.
  7. Marcarl
    Now what would you post such a happening,,, other than Bob is probably typing up a real good story right at the moment????????
  8. Marcarl
    Hey,,,, give a little notice for that party will ya, I plan to attend!!!!!
  9. Marcarl
    GOOD LOOKIN ain't he??????? Got to get me one of those hats!!!!!!!!!!!!!
  10. Marcarl
    Now how did you get so smart?
  11. Marcarl
    I drilled 4 5\8" holes in the lid of mine,,,, can't say if it made any difference, but then mine runs fine with the filter off as well, and my mileage is as good or better than any other, not by much, but for sure not worse.
  12. Marcarl
    Yep, just exactly where I put it so you could find it easier.
  13. Marcarl
    Now what I need to know is what would Becky have if you all came,,,, I know you would have some of both,,, so that's 2 extra for me,,, but what would Becky have had,,,, I need to know!!!!
  14. Marcarl
    Who? Only if you're descent Where? The patio @ Marcarl's When? Friday July 23 after supper Why? Dirt is getting older Kind of an open house type thing. It says it might rain, so cages are ok. Family may also show up, so be ready to meet some interesting folks.(I told them something different, and no I can't repeat it here.)
  15. Marcarl
    How can you get lost in Indiana,,,, you just have to follow the buggy with the boat!!!
  16. Marcarl
    I thought maybe Mini was missing, but I see she caught the train on the way in again, but now where is SlepperHawk's Mechanic
  17. Marcarl
    I find that at slow speeds, I mean slow, like 5 mph, the trailer will wiggle the bike somewhat, especially when going over bumps or through holes,,, no need to worry about that, once you put the power to the back wheel the bike will take over and you should run free and easy, and the only thing you will notice will be that your scoot will have to work harder to get up to speed. aannnnddd it will take longer to stop,,, ya that's all important,,, it takes longer to stop, what I mean with that is that it takes longer to stop.
  18. Marcarl
    It may clear it up and then again it may not. If you have ignition noise then most likely you have an ignition wire running too close to the frame, touching the frame or leaking (sparking) to the frame. I would check those items first. Carl PS $40.00 seems to be quite high for that item, you should be able to do much better with an aftermarket filter.
  19. Marcarl
    Congrats olde boy,,, now you are really showing your age,,,, sure is nice though EH?
  20. Marcarl
    to Slepperhawk's to try and find his Mechanic,,,, which he left somewhere and can't remember when orrrr where
  21. Marcarl
    And I, uhhhhhh, Marca got the wallet and already being put to use,,,, don't ask me if it's good use,,,, that will take time to determine,,, but it being used none the less. Thanks, girl, it was nice having you think of us. See you next year. Carl
  22. Marcarl
    Just remember when you plan, that just north of the U.S of A is the greatest country in the world, and it also should be visited,,,, IT'S: C eh N eh D eh
  23. Marcarl
    Glad to get an update,,,, we were wondering what happened to Lowell, hadn't heard about him for sometime,,,, normally he gets tracked during the riding months,,, but nothing that I can remember this year,,,, so here's some more prayer for the wanderer and the hope that he continues to enjoy life to the extent that would be possible. So for anybody in the area,,, I'm sure he would enjoy a visit,,, even if you haven't met him yet.
  24. Marcarl
    You could start loading the edge of the windshield.
  25. Marcarl
    What kind of helmet do you have? Cover the mic with the palm of your hand to see if that helps the problem. Could be you have feedback from the speakers to the mic, or you may have a crossed wire some where that would short things out. Just some thoughts. Carl
×
×
  • Create New...