Jump to content

bongobobny

Expired Membership
 View Profile  See their activity

  • Posts

    14,661

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by bongobobny

  1. bongobobny
    OK a starter motor DOES put a heck of a load on the battery but I'm not sure it puts that much. Does it crank over at regular speed or does it seem slow?? Sounds to me like it may be new battery time... Of course you could have a dirty ground on the battery cable, or a bad solenoid, or corroded + contact somewhere. One big culprit is those yucky fuse connectors. Read directly across the battery and get back to us!
  2. bongobobny
    We are going to try to make it for at least a day bor two, depending when Sexi Two Timer (The new scoot's temporary official name) is bgack in our possession...
  3. bongobobny
    Yah!! It is a fancy name for a regular MAP sensor, or Manifold Absolute Pressure sensor to set the spark advance wqhere it is needed to be. It gives a control voltage proportional to the amount of vacuum to let the TCI know how much or little to advance the spark...
  4. bongobobny
    We are assuming that the jacks for the headsets already exist on the bike, right?? If not, they both plug into the main amplifier the same place the tuner and the CB plug into...
  5. bongobobny
    Does the red line drop at any of the other points as well, or just at the TCI??
  6. bongobobny
    I agree with Squidley!! GREAT guy and even though we did spend a little time together wish we had more!
  7. bongobobny
    Wife would disown me if I bought your trailer, even if it matches Goldie!! Besides, we already have a matching trailer...
  8. bongobobny
    OK larger trunk and non removable saddlebags = 1st gen MK2 which is '86 - '92. Now, nut on front axle as opposed to front axle screwing into the fork bottom = '86 and '87 as opposed to '88 up. Ya done good!!!!!
  9. bongobobny
    We can send Big Tom and SpankyM over, they are experts now with a rotary cutter, chisel and hammer...
  10. bongobobny
    Well, the guys in our machine repair shop clamped the bearing in the vice and pounded on the triple tree shaft. Your best bet is to replace the bearings and races for the small cost of the bearings. The bike will steer a lot smoother...
  11. bongobobny
    Just your eye out at all times for them critters on the highway... Not saying for sure, but maybe your bell you gave me is the reason I can still type!
  12. bongobobny
    I had 2...
  13. bongobobny
    That will stil be there. The "Supporting Member" is an add on to what's already there.
  14. bongobobny
    First off, it seems very strange to be into the 2nd gen tech section!! Any way, I am loking for a good deal on a light bar. Where should I look?? What kind of lights option do I have?? Where should I tie the power from?? Questions, questions...
  15. bongobobny
    First off, it seems very strange to be into the 2nd gen tech section!! Any way, I am loking for a good deal on a light bar. Where should I look?? What kind of lights option do I have?? Where should I tie the power from?? Questions, questions...
  16. bongobobny
    Schleppo, yes, the MK2 boards can be made to fit. You have to make a set of hangers for your exhaust, and use some of the hardware from the peg mounts, and buy 2 longer bolts, but it does work...
  17. bongobobny
    What really makes a difference is if you use the intercom. If not, then just find a nice aftermarket stereo, PREFERRABLY a waterproof Marine one, and fabricate a mounting plate. After you get rid of the stock radio there is plenty of room. You will also loose your CB though doing it that way unless you have an AUX conector, and then you can only listen to the CB or a CD, or the radio... Yes it has been done many times.
  18. bongobobny
    The MK2 rear calipers are 4 piston just like the front, not 2 piston. You have to swap out the caliper mounting arm and do a little bit of McGuiver'ing or get the swivel from a MK2 swing arm for attaching the mount arm to the swing arm...
  19. bongobobny
    Peggy, it was truly GREAT finally meeting you in person! Wish we could have met Ron too...
  20. bongobobny
    Agreed!! Let us know where you are going to be and I can almost guarantee a mini M&E everywhere!! This FAMILY is the greatest!!!
  21. bongobobny
    OK Greg, I just answered your PM. So now I take it these are YOUR nice new bolts and you probably need them,right? Hiope I didn't loose any of them! I'll see if I can gewt them off to you soon.
  22. bongobobny
    Yes, HE does!!! Amen and Amen!!
  23. bongobobny
    Many Many thanks, Don, it was the best event I have been to yet!!! Sooooo many prople I finally met in person, I'm never gonna remember everybody!
  24. bongobobny
    Did you see his thong on the lid?? Those Beer glasses werre the perfect touch!!!!!
  25. bongobobny
    Hey Dan, everybody should have a little Heiny now and then...
×
×
  • Create New...