Search the Community
Showing results for tags 'replacement'.
-
I broke the arm on one of my highway boards. would like to get a replacement but there are no markings on the boards. Anyone recognize the brand? Thanks!
-
I bought a 2011 Silverado about a year ago when there were some great rebates and discounts but being the cheapskate that I am I decided to NOT pay the extra for the leather interior. Not really a big mistake but I decided that I wanted a leather interior in it for christmas. After a lot of research I found that the leather interior from the factory is only partially leather. No matter, in searching I found that Katzkin (in California) made the best fitting and best overall quality replacement. They are not seat covers but replacement fabric for the seat. Hope I like it because it will be redone next thursday as well as heat in both seats.
-
Does anyone know what company made the lights that go in the light bars that wrap around the trunk and saddlebags? I need to find a replacement for one as the lens is broken. Thanks for any info....[ATTACH]72923[/ATTACH]
-
Said goodby to the best bike I've ever owned this week. BUT those tears are going to be short lived as I've already have a replacement lined up and will be picking it up next weekend. Larry
-
I was looking for a replacement left side fairing mirror for an 85 venture. 50 or 60 bucks on ebay sounds like a lot of $$$. I see some of the goldwing aftermarket mirrors on bikebandit ($10) look awfully close. Has anyone ever tried mating one to the Venture?
-
Has anybody used this windshield as a replacement and is it a decent quality for the price? http://www.ebay.com/itm/83-93-Yamaha-XVZ-1200-1300-Venture-Royale-WINDSHIELD?item=140815088391&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D2%26po%3DLVI%26ps%3D63%26clkid%3D1624150924259620255
-
This site is very informative and worthwhile! Which ever diseases you click-on it gives you a video explanation! Interactive Sites For Medical Information The tutorials listed below are interactive health education resources from the Patient Education Institute. Using animated graphics each tutorial explains a procedure or condition in easy-to-read language. You can also listen to the tutorial. JUST CLICK ON A SPECIFIC AILMENT NOTE: These tutorials require a special Flash plug-in, version 6 or Above... If you do not have Flash, you will be prompted to obtain a free download of the software before you start the tutorial. Diseases and Conditions Abdominal Aortic Aneurysm Acne AIDS Allergies to Dust Mites Alopecia Amyotrophic Lateral Sclerosis Angina Anthrax Arrhythmias Arthritis Asthma Atrial Fibrillation Avian Influenza Back Pain - How to Prevent Bell's Palsy Brain Cancer Breast Cancer Burns Cataracts Cerebral Palsy Cold Sores (Herpes) Colon Cancer Congestive Heart Failure COPD (Chronic Obstructive Pulmonary Disease) Crohn's Disease Cystic Fibrosis Depression Diabetes - Eye Complications Diabetes - Foot Care Diabetes - Introduction Diabetes - Meal Planning Diverticulosis Endometriosis Epstein Barr (Mononucleosis) Erectile Dysfunction Fibromyalgia Flashes and Floaters Fractures and Sprains Ganglion Cysts Gastroesophageal Reflux Disease (GERD) Glaucoma Gout Hearing Loss Heart Attack Hepatitis B Hepatitis C Hypertension (High Blood Pressure) Hypoglycemia Incisional Hernia Influenza Inguinal Hernia Irritable Bowel Syndrome Kidney Failure Kidney Stones Leishmaniasis Leukemia Low Testosterone Lung Cancer Lupus Lyme Disease Macular Degeneration Malaria Melanoma Meningitis Menopause Migraine Headache Mitral Valve Prolapse Multiple Myeloma Multiple Sclerosis Myasthenia Gravis Osteoarthritis Osteoporosis Otitis Media Ovarian Cancer Ovarian Cysts Pancreatitis Parkinson's Disease Pneumonia Prostate Cancer - What is it? Psoriasis Retinal Tear and Detachment Rheumatoid Arthritis Rotator Cuff Injuries Sarcoidosis Scabies Seizures and Epilepsy Sexually Transmitted Diseases Shingles Skin Cancer Sleep Disorders Smallpox Spinal Cord Injury Temporomandibular Joint Disorders (TMJ) Tennis Elbow Tinnitus Trigeminal Neuralgia Tuberculosis Ulcerative Colitis Umbilical Hernia Uterine Fibroids Varicose Veins Vasculitis Warts Tests and Diagnostic Procedures Amniocentesis Barium Enema Bone Densitometry Breast Lumps - Biopsy Bronchoscopy Colonoscopy Colposcopy Coronary Angiogram and Angioplasty CT Scan (CAT Scan) Cystoscopy - Female Cystoscopy - Male Echocardiogram Echocardiography Stress Test IVP (Intra Venous Pyelogram) Knee Arthroscopy Laparoscopy Mammogram MRI Myelogram Newborn Screening Pap Smear Shoulder Arthroscopy Sigmoidoscopy Ultrasound Upper GI Endoscopy Surgery and reatment Procedures Aorto-Bifemoral Bypass Cardiac Rehabilitation Carotid Endarterectomy Carpal Tunnel Syndrome Chemotherapy Cholecystectomy - Open Laparoscopic (Gallbladder Removal Surgery) Clinical Trials Colon Cancer Surgery Colostomy Coronary Artery Bypass Graft (CABG) C-Section Dilation and Curettage (D & C) General Anesthesia Heart Valve Replacement Hemorrhoid Surgery Hip Replacement Hip Replacement - Physical Therapy Hysterectomy Knee Replacement LASIK Massage Therapy Neurosurgery - What is it? Open Heart Surgery - What to Expect? Pacemakers Preparing for Surgery Prostate Cancer - Radiation Therapy Shoulder Replacement Sinus Surgery Stroke Rehabilitation Thyroid Surgery Tonsillectomy and Adenoidectomy TURP (Prostate Surgery) Vaginal Birth Vasectomy Prevention and Wellness Back Exercises Coumadin - Introduction
-
I know this has been decussed before,but I need to know if I install 1 1/2 risers what do I do about the rubber bushing between the bars and fairing? Is there a replacement for this bushing?
-
I don't normally praise a lot of companies but I have to say something about Garmin. I've owned a Zumo 550 for a number of years. Once I had a software issue after the warranty had run out and the service rep told me she had heard of this sort of thing happening on a rare occasion with some of the other units but never a Zumo. She said it was obviously nothing I did and sent me a new unit completely covered. Impressive!! Now recently I had the covering of the on/off button finally wear out and the unit got some water in it that made the screen hard to work and then it finally cracked. I'm pretty technically inclined so I openned it up and found the problem. I called Garmin to see if I could order a new screen and housing because the warranty was LONG over and the rest of the unit worked fine. They told me they didn't sell the parts but for $150 they would send a new or refurbished unit to me. That's pretty close to what I was thinking I would have to pay for the parts so I was pretty happy with that. They said I would receive the replacement 10-14 days after they received mine so I sent it off. Not only did I have the replacement 7 days after I sent mine but after careful examination I'm convinced this is a brand new unit. New software, maps and everything. They had even updated the serial number in my registration in MyGarmin so I didn't need to do anything for the new unit to be recognized. WOW!!!! Now that's customer service!! I am now a LOYAL Garmin customer.
-
last night i was having issues with not all cylinders running at the same time, i had no to low fire on a rear cylinder so i popped of the cap while running to see if the was any change in idle. and as soon as the cap cleared the plug i got some good zaps so it would seem my caps and wires are no good. where can i get the best replacement? -
Are there any replacement antennas for both the CB and the AM/FM OEM whips on a 2nd Gen? Mine are working fine as far as I know. I never use the CB or the AM/FM. I would just like replacements that are shorter. It would be a plus if the replacements actually work but since I don't use them and I would keep the OEM whips I suppose that would be ok also. Preferrably they should be as simple as possible to replace...just screw them on???
-
I have a 1st Generation Venture Royal. Is there a code number to use to get a replacement ignition key made and where can I find it. Thanks, racerod129
-
Good news! Repair shop found my wheel spacer. Now I can make it to the Kootenays this weekend. Thanks to the guys that offered me a replacement parts. Now just have to pick it up, get it all together and take it for a:cool10: test. Markus(calgaryrider)
-
My sidestand switch isn't working properly, and was looking for another one. As the part is discontinued, I was wondering........where do I get one? This is for my 84
-
ok i just got approved for a total knee replacement for my very bad left knee. this will be done around the end of july. what i want to ask is? how many here had this done? and how long did it take you to feel like you could ride a bike again? also the right knee needs a partical replacement. most likely a year after the left. i was told that after the left one is done i will be sent to a rehab place for 2 weeks because i live alone and i have MS as well so they want me working the new knee for 4 to 5 hours a day for that 2 weeks the lots of PT there after. no driving for 6 weeks? this sounds like a good plan and i hope it works. not sure how much pain is invovled in healing ? im prety good at handling pain. and im sure they will dope me up. bad news is no new bike this fall. but hopes are for a good recovery and a new to me bike in the summer of 2013 i will have about $3900 to $4200 for a bike. wont be able to find one with the voyager trike kit for that amount. but if i get a light bike and low in the seat hight i should be able to hold it up. well let me know how you all did if you had this type of operation. and how long it took ya to get back on a bike thanks oldgoat
-
I'm looking at adding collision to my Venture. Whats a good site for replacement value for insurance purposes?
-
I've checked the Classifieds, and didn't find anything there, but does anyone know of a good site to check for replacement lower wind deflectors? On my recent trip to DC, one of the brackets broke and I lost one somewhere along the line, and need to replace it, but given the condition of the other one, I figure I'd replace both. I can get the replacement mounting bracket fairly cheap from Yamaha, but the deflectors are a little pricy. Thanks.
-
Anyone have an extra? When I dropped my VR in the garage it went scurrying somewhere, oonly to be found when I purchase a replacement. So if you have one to sell, the other one will probably show up and I can pay it forward. -
I just discovered that my rear pads are pretty well shot, and that my rear rotor is looking like it probably needs to be replaced sometime soon as well. The OEM replacement rotor at the stealership is about $240, plus the new bolts. I found an EBC replacement rotor on eBay for $145, new in the package and free shipping. http://www.ebay.com/itm/EBC-Brake-Rotor-MD2078-for-Yamaha-XVZ1300TF-Royal-Star-Venture-1999-2008-/261008709417?pt=Motorcycles_Parts_Accessories&hash=item3cc554d729&vxp=mtr Does anyone have any experience with this brand, or would I be wise to bite the bullet and stick with Yami's stock rotor? Any other suggestions would also be appreciated. Thanks.
-
I was wondering if anyone knows of a replacement or some way to replace the top half of the CB antenna. I have 2 friends missing the top piece above the black part. Is it possible to make up something that will work or find a place that sells just that part?
-
I had a custom LED setup for my rear lights, but one of the diodes burned out. I had a friend look at it and because he doesn't know what the diode types are he doesn't think he can fix it. He tried, but it lasted about 30 seconds and burnt out again. Any suggestions for a replacement? The one I had was like this - http://www.customdynamics.com/Yamaha_tail_retro.htm - but $90 plus shipping seems a bit much for a bunch of LEDs on a board. Does anybody know a reasonable replacement for a better cost? I have a regular bulb in there for now, so I don't think there's any kind of short. Bike is a 2001 1300 RSV -
I ordered the Barnett Clutch Kit, plates & pressure plate, back in August of 2010. Because of health reasons, (more like apprehension/Lazyness), I didn't install it until this morning. I found a page on this site for clutch replacement and finally dug in. I got it all appart and saw something about noticing the marks on the clutch plates, which I saw on the originals but not on the Barnett. So, I figured that it doesn't matter & put it together anyway. But, before tightening it all down, I decided to cover it up and check for replacing with BARNETT Clutches. Boy am I glad I stopped!! I obviously have the wrong clutch package. So, come Monday, I will be on the phone ordering the correct clutch plate set. I will have to overnight it because we are heading to Ohio mid May. So, this clutch replacement is going to cost me MUCH more. I guess that is the price I pay for putting things off! Craigr
-
We have floorboards on my wife's 84 1200 trike and were wondering if they could be fitted to a 93 1300 that we are thinking of buying as a replacement which will also be triked. We are looking at several 93s but only one has floorboards.
-
Howdy folks. I am in the process of trying to identify an intermittent problem with my bike. unfortunately I think this may end up including needing to replace the ignition module. I have found some form Pinwall (and another member has offered me one that he purchased used) and I am aware of the Dyna 3000 as a replacement. I don't really have any interest in doing the Dyna replacement and my preference would be for a unit that has a reasonably well known history (ie out of someone's bike that got upgraded to a Dyna unit or something like that). So my question is does anyone have a spare module out of their RSV that they took out for the purpose of replacing the current one with a dyna or whatever? If so, would you be willing to part with it, for how much, etc etc. Thanks a lot!
-
I was looking at the front of my 2006 RSTD next to my 2009 Liner. The liner light looks SOOOO much better. Is there an aftermarket headlight assembly replacement for the RSTD? Any pictures of bikes with this done? Also looking for passing lights to match them. I was looking at the Yamaha lights and bar, but heard about power draw on the light bar as well as all the other options. Whatever headlamp I decide on, I'm going to get some passing lights that compliment it.
.thumb.jpg.e030d8724ef3f2eadc94ab840d0f3801.jpg)
