Jump to content

Marcarl

Life Member
 View Profile  See their activity

  • Posts

    11,504

  • Joined

  • Days Won

    180

 Content Type 

Everything posted by Marcarl

  1. Marcarl
    One step at a time...I'm still a little green at this all.
  2. Marcarl
    Had the same issue, with the same results,,, good company, and good product!! NOTE: You have to be careful when you insert your foot into the pants or you will tear the crotch and cause leaking problems,,,, from the outside in,, I think.
  3. Marcarl
    I could not have said it better, nor do I have anything to add. Thanks for posting.
  4. Marcarl
    So far this thread has not needed a moder.. what ever you call them. Good for you guys!!!
  5. Marcarl
    Muffler clamps are a 13mm on my 85, they might be a little tight and corroded, so it might take a slight tap of a small hammer to help things along. Also I've noticed that normally they point straight down, they angle in a bit, so keep that in mind.
  6. Marcarl
    Wow,,, this is cause for celebration,,,,,,,, QUICKSTEP MADE A POST!!!!!!!!!!!!!!
  7. Marcarl
    You could have wished the beer thing,, with the cops and all,,, then you could have kicked the crapple out him for good ,,, but now?? you'll go old and gray to your grave, all sunken in and bent over from the load you have to bear,,, oh that there were better days ahead.
  8. Marcarl
    He almost had me fooled
  9. Marcarl
    Don't anybody take a 2nd guess, or draw an extra breath. That was awesome!!!
  10. Marcarl
    What's this,, camera broke again? How many times do I have to tell you, if we don't have pictures it didn't happen or it's not happening,,,, what ever,,,, fill us in here, we are all supportive,, well kind of,, some of the time..
  11. Marcarl
    Don't need to get jealous now,,,, we all do our own thing,, that makes us different and as the old saying goes: It's nice to be the same, But great to be different.
  12. Marcarl
    Knew it had something to do with a bearing,,, and now I know,,,, guess it was all in your head.
  13. Marcarl
    Half way up the glass, with the bike sitting straight up, is the correct answer.
  14. Marcarl
    I think my kit has one, but I'm not home until tomorrow,, will look then, but now I know what you are looking for,,,, a m12x1.25 tap,,, if your measurements were correct.
  15. Marcarl
    The best I could guess from what I heard was a throw out bearing. So there,, that makes 2 of us, do you believe it now?
  16. Marcarl
    OK, in my mind the flywheel and the drive shaft have very little in common, and I'm trying to envision how they are related in regards to what you are talking about. Somehow I think I'm going to need a more complete description or more detail or both,, maybe a picture. Off hand I think you are meaning pumpkin and drive shaft,, but I could be wrong,,, been that before once,, long time ago, but I still remember.
  17. Marcarl
    Might be handie to know what you exactly mean by 'pinion'. Pictures are always good.
  18. Marcarl
    Do you need some helpful words to use,,, some convincing language?
  19. Marcarl
    Isn't that kind of 'normal' for you ladies,,,, seems very cheap at first but then when there is a bit of a contract,,,, you take all there is and then some. So what's the problem,,,, or am I getting into something where angels fear to tread.
  20. Marcarl
    Guess that doesn't effect me then, I'm on EST.
  21. Marcarl
    I'll second that motion!!!
  22. Marcarl
    It would take just as long to solder the joints as to add the valves, and for me, even if it took a lot longer to solder, that's the way I would go. It's just one of the reasons I'm not interested in a 2nd gen,,,, besides the fact that they a soooo much slower. But that's only my opinion. By the way, the clicking you hear are the solenoids, the pump makes a motor type sound.
  23. Marcarl
    Looks used, but not abused.
  24. Marcarl
    Your return spring maybe out of adjustment or getting weak so that the pedal doesn't return all the way. Although you might need new pads, this should have nothing to do with the release of the brakes. Your brakes will probably need to be serviced if they haven't been. Crystals tend to build up in the system as well as dirt, so it is a good idea to pull the calipers and the master cylinder off in order to clean them and check for wear and warn seals. I've done a couple, and all I had to do was to clean them, but once apart you need to check for problems. There is a very small, meaning very small hole in the master cylinder that will get blocked with a bit of dirt that will present exactly the problem you are discribing, hence the suggestion to clean things out.
  25. Marcarl
    I'll tell ya, it's the keyboard,,,, I've been so busy lately, this new job is going to do me in,,,I'm sure of it,, well maybe,, or maybe knot.
×
×
  • Create New...