Jump to content

Marcarl

Super Moderators
 View Profile  See their activity

  • Posts

    11,470

  • Joined

  • Days Won

    172

 Content Type 

Everything posted by Marcarl

  1. Marcarl
    Darn,,,, they said it all already. Good luck, you'll be happy.
  2. Marcarl
    Pasted mine down behind the seat with double sided tape, drilled a hole through it to put a cable tie through to keep the end from leaving it's place. Now when I hook in the curly cord it stays behind the seat until my partner wants to ride, then it comes out and she plugs in with the short cord from the helmet, also she doesn't have to walk around with a long cord hanging from her neck.
  3. Marcarl
    I wired my trailer from the back where I could get at the harness, under the trunk area. I glued my modulite inside the back rail and then taped the wires together and run them down the little pipe that holds the fender at the bottom. Hope this helps. Carl
  4. Marcarl
    When you take your wheels off, remove the pads, but mark them so they go back to the same side, and campher the leading edge slightly with a file. You'll find that the squeel is gone.
  5. Marcarl
    Sounds like it will be a real nice ride, might run into you when you're around Brantford. Going to worship first thing in the morning, as always, so we're never ready 'til 1pm anyways. Have a good ride.
  6. Marcarl
    We're still working on putting on another set of tires, should be any day now. We'll let you know. What we're experincing is not a front end wobble, it's more like a fish squirm from the bike itself.
  7. Marcarl
    Good to hear, and we'll continue to ask for healing. Carl
  8. Marcarl
    They will only let me have soo many Saturdays off so I'm stuck this weekend but hope to have some fun next weekend, don't know where or how but the plan is there.
  9. Marcarl
    Man, I feel for you JT, will keep asking for divine intervention, could be He will listen, we won't give up.
  10. Marcarl
    Follow the link in my signature, big boy.
  11. Marcarl
    Ok we're gonna need more info here.....?????
  12. Marcarl
    I don't believe that soooo many of you actually read this thread and then responded:think:
  13. Marcarl
    So are you saying that I'm the real attraction???????
  14. Marcarl
    A little late maybe, but the the plate on #2 is governed by the throttle stop screw. Took me a while to figure that one out, but solved my problem once it came to my brain. Good Luck.
  15. Marcarl
    Don't know how much noise you are looking for, but I just drilled mine out with a 7\8 spade drill bit. From both ends. Gives a bit of a rumble, not anything loud but enough to show that work is being done. Easy to do, all you need is a long extension, the metal is really quite easy to drill out.
  16. Marcarl

    A new way to get around

    Marcarl replied to a topic in Videos

    Think I'll get me one of those. Traffic here is horendous sometimes, maybe even 3 cars a day going by. Hey Lou, want to make a loan??
  17. Marcarl
    Don't really know the answer, but on the 1st gens there are 2 power wires going to the audio, one for constsant power and one for switched power. If that is the case with yours, could be something flukie with that. That being said, members have had other problems with the ignition switch, so you might look at that.
  18. Marcarl
    Thanks Lou, that was GOOD
  19. Marcarl
    Hey, We don't want to ignore you so I posted here, don't know the answer just yet, but will post again when I know, most likely next time I turn 18, then I'll know everything. Thanks this will be handie, I know of what you speak.
  20. Marcarl
    Well there is my daughter Andrea, she's doing all the fuunie stuff, then there's Jacquie, and Nikky and Joanne, all friends of Andrea and all of them old enough to know better, but still tooo young to resist, 'course with a 'magnet' and a first gen, who wouldn't wanta?????
  21. Marcarl
    She's not my mother, I'm waiting for 'wifeday', then maybe,,,,, Now why did I say that???????
  22. Marcarl
    Started at 5 pm and finished at 10 pm ferrying these girls around, and didn't even take my Missus for a ride today, man I might be plump wore out if it easn't soooo much fun.
  23. Marcarl
    There's a post in the tech section on how to tighten the steering head, actually you tighten them until you have very little bounce on the handle bars when you push them over. Cupping on the tire is not going to help your situation, but from what you discribed your steering head needs tightening.
  24. Marcarl
    I know this might sound some what stupid, but try to put your kickstand in the UP postion.
  25. Marcarl
    Thanks for the update, we will keep praying for you two, and hopefully soon be able to praise, and be thankful for His compassion.
×
×
  • Create New...