Jump to content

hdroyer

Expired Membership
 View Profile  See their activity

  • Posts

    138

  • Joined

  • Last visited

 Content Type 

Everything posted by hdroyer

  1. hdroyer
    I used a 5/16 drill & 10MM tap on the base. There was a small whole in the base I used 3/16 then 1/4 then 5/16 and taped. I would check the mirrors you use they do come in different thread sizes.
  2. hdroyer
    Yes but not bad, I am thinking about cutting a piece of rubber to put under the mirror mount to see if it helps.
  3. hdroyer
    I got the mirrors done, I only had one base with boot so I painted the other black. I used a 10MM tap on the bases, I would like to have used larger mirrors may change them this was a test. Mirrors $17.00 from JC Whitney any suggestions welcome. Dale
  4. hdroyer
    I read some where that if you loosen the cap bolt on the rear master and shim the peddle down putting pressure on the system over night this forces the air out. Dale
  5. hdroyer
    Just found out Advanced auto parts carries Fram :mo money:CH6002 in stock for $4.18 Dale
  6. hdroyer
    This happened to me on my 83. Jeff AKA muffin man had me jump the ignition fuse this worked. I got 12V on my Ohem meeter but the connection was not strong enough to run any thing Then I put an in line fuse in place of the original no problems after that, some day replace fuse box. Dale
  7. hdroyer
    I found a right side now I need a left side any takers Dale
  8. hdroyer
    Dose any one have a mirror base from a broken right hand mirror for a 1Gen 83 or one that would fit. I want to tap it and see if I could put after market mirrors on them the OEM ones are so high. Dale
  9. hdroyer
    I had the same thing happen, I had to use a piece of wire from a bread tie to clear the return whole.
  10. hdroyer
    Dose any one have a mirror base from a broken right hand mirror for a 1Gen 83 or one that would have same screw pattern. I want to tap it and see if I could put after market mirrors on them the OEM ones are so high. Dale
  11. hdroyer
    $3.95 EMGO oil filters www.crc2onlinecatalog.com $6.00 shipping flat rate order several, plugs are $2.25 NGK Fast shipping to Dale
  12. hdroyer
    I have got a leak on the left side of the tube that you drain the coolant. I think goes in to the thermostatic valve is that an o ring I cane replace or is it more . Dale
  13. hdroyer
    I need a mirror right side Glass broken or not, If you got one I am in the market. Don' ask why just that Mr. Dumb As* struck again. Dale
  14. hdroyer
    I agree with freebird very happy with them, you can get them from ridenow.com for 1Gen for $176.80 to the door, about $60.00 less then most places. Dale
  15. hdroyer
    Yes you should be able to take it to a locksmith and get one made Dale
  16. hdroyer
    Jeff and I found the ignition circuit bad jump it started, Put in line fuse in till can get fuse block. Put every thing back together now it won't start. 11.98V through circuit when push starter button Spark on all Plugs looks good on blue side fuel pump working I think it is flooding smell gas I put new plugs in any ideas, Thanks Dale Oh 1gen 83
  17. hdroyer
    Yes they can cut one to fit and replace it, The glue they use is a special glue that wont attack the silver on the back of the mirror. The new one will be the actual distance things will not be further away. Dale
  18. hdroyer
    Thanks Jeff :happy65::happy65: Jeff you the man!!!!!!!!!! With out your patience and persistence, I would still be looking for the problem. Thinking the ignition circuit was good the meter giving me 12.V on the circuit. thank you thank you. Dale
  19. hdroyer
    I check the side stand down resistance up no resistance. Kill switch off resistance on no resistance. the full pump is not clicking i crossed the connections to the side stand still no full pump click. that is what I have for now I will continue to check relays. Dale
  20. hdroyer
    The bike just died, Jeff is trying to help any buddy else want in. Head light, dash, tail, turn work. Jumped starter relay starter worked. will check kick stand, kill switch and emergency and starter relays. any other ideas. Did 600 M trip to WV ran fine , Thanks Dale
  21. hdroyer
    I like to know what was used for the brake and headlite strobe and were you purchised them. I would like to do somthing like this to my 83 1Gen. Dale
  22. hdroyer
    I took FreeBird's advice an went with the commanders. The bike handles like a completely different bike 1Gen., I was unsure about the wobble with the venoms. ridenow.com $176.80 shipped front and rear date 2006. 120/90-18F 140/90-16R
  23. hdroyer
    Thanks for the info I will try the bulb and paint then aux lights. The more the better out here in deer country. Dale
  24. hdroyer
    Is there a brighter head light you can install in 83 Std. Witch will put out more light. Dale
  25. hdroyer
    The wife is now riding with me and complains she has no place to lock her helmet. I could use a helmet lock with out key I have a locksmith that Will re key for $7.50. If you have one you can part with let me know. Allen thank you so very much for the end caps!!! Dale 83V-STd.
×
×
  • Create New...