Search the Community
Showing results for tags 'kit'.
-
:bang head:hi all i have a full exhaust on my rstd i just bought. and they did not jet the carb. is there a jet kit out there for a 05 rstd. i cant find one.
-
Has anyone out there used this or know anything about it? I would like any and all info you can give me. Thanks http://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=BA-7530-00
-
Is there a 'Canadian' travel shim kit available to be shared? If there is....does it include the special tool? I would be very interested to use it and would also make a contribution to it if necessary. I called a local shop (non-dealer) and they carry shims....he charges $5.00 exchange.
-
Hey guys, I need to get my clutch redone, sorted out as it's slipping at highway speeds.. not so bad when taking off from a stop but up on the highway, dropping the hammer really screams up the revs and eventually I'll feel some accelleration. Folks have been leading on to the PCW Racing clutch kit, which is not as expensive as thd Barnett clutch kit. Comparing apples to oranges, is one better than the other or are we looking as one being as good as the other, only price being the difference? I couldn't reach the PCW people today.. ergh
-
Once the Voyager kit is on your bike the question is: Is this a trike, or a quad bike?????????? A trike has three wheels -- a quad has four As a RSV with kit on is somewhere in between, I decided they should have their own unique name, so here-on in they will be referred to as: A "QUIKE" :dancefool:
-
Hi Everyone - I too am considering putting a Voyager on my 2009 Venture S. I seem to remember somewhere that it said the side saddle bags would not open with the kit on. Can this be true? Does anyone have a Venture with the classic kit that can tell me for sure? That would make a big difference to me. Thanks for the info. Don
-
Left at 6am today From Sudbury and headed to WAWA the Back...... X country Way..... and...... back at 8pm 1127 kms(699.86 miles) and 4 rest stops to ease my butt... I see I still can do it with a few surprises of lock joint in my clutch fingers IM planning a trip or 2 to the USA still waiting for My Enchanced Drivers Licence If not this year next:dancefool: My little KLR 650 was packed 2 man tent , a sleeping bag , mattress, Umbrella, fishing rod , tools, camera, cover, first aid kit, GPS( OLD SCHOOL... MAPS):rotfl:etc etc etc. I average 57 mpg at a speed of 120km on and off the highway Just love it Took a photo at Sault Ste Marie, Ontario, USA is right across the river..So close yet so far away
-
For anyone contemplating buying or putting together a valve shim kit, you won't BELIEVE this buy! I'm sure the web site is a mistake, but I ordered one anyway and got it for a total of $12.90 ($5.95+shipping)! I expected them to call me and say "no way", but it arrived today! :cool10: And now they have even LOWERED that price! Better get your order in before they change it. Order the starter kit from this page: http://www.preferredpowersports.com/eshopprod_cat_5347-19112-30104_product_736199_keyword_25mm+AND+shims.KL_HONDAYAMAHA_SHIMS.htm Goose
-
Hi All - I am considering putting a Voyager Kit on my 2009 Yahama Venture but would sure like to see one before I do that. Is there anyone within a 200 mile radius of Chambersburg, PA that would be willing to let me come and visit to see their voyager kit? I sure would appreciate it. Thanks much. Don Wood
-
[/url]Item 250464964200 Auction ends tonight.
-
I have a complete Baron's lowering kit. Its Used and in great shape. Comes complete with instructions for install. $140.00 with FREE SHIPPING to the lower 48 states, Pay Pal excepted.
-
Check it out in the Classifieds if you are looking for one. FREE SHIPPING
-
Has any one ever put a lowering kit on a Venture?? If so does it handle different? I would like to lower the back 1". I have only found a kit for 1.5". I could handle that But don,t Know how it will handle & would it be hard on the drive shaft? any input welcome. My long legs with only 29" inseam would like it just a little lower.
-
RSV gauge install - maybe I can help someone else?
ablumny posted a topic in GPS, Audio, Electronics
I followed jlh3rd's and V7Goose's posts on the subject. FANTASTIC data and THANK YOU to both plus everyone that added to their posts with tips, tricks and improvements. I started the project and have the 1/8" x 27 NPT TAP and the HELP! 42009 Spark Plug Non Fouler available to someone who needs it. (see V7GOOSE's post) Neither "tool" is particularly hard to find or expensive but I'll never use either again and try to give back where possible. I am willing to ship it to someone who needs them. PM me if you need it, I'll even cover shipping. Send it to someone else when your done!? Anyway: Everything is prepped on the gauges. Based on forum member tips: - Went with Mechanical gauges - Ordered 1/4" black ABS (from an eBay auction) to make my gauge bezel - Bought auto hose to cover the oil line to prevent an exhaust pipe issue I'll post a picture of the final product when done. In the meantime, if you're thinking about diving in, it was simple to get started: WATTS parts from Lowes and everything else from AID AUTO http://lh5.ggpht.com/_9EMyKcng_yA/Sj64PKtyDVI/AAAAAAAACK4/aVoDWufRPy4/s512/P6210533.JPG M20 Oil Drain plug, drilled and tapped with A712 elbow. Drill press comes in handy. Yep, Teflon tape b4 install. The rest from the gauge kit http://lh3.ggpht.com/_9EMyKcng_yA/Sj64PaRLU6I/AAAAAAAACK8/0UFeQIT9zkA/s512/P6210534.JPG A213 adapter (left), rethreaded with Non-Fouler. The rest came with the gauge kit http://lh3.ggpht.com/_9EMyKcng_yA/Sj64QC1kujI/AAAAAAAACLE/G3_qDtZPG_Y/s512/P6210537.JPG My personal pref. SunPro 1.5" gauge kit. Got these from PepBoys, $35 http://lh4.ggpht.com/_9EMyKcng_yA/Sj64QkYTREI/AAAAAAAACLI/5fv-PrSKjTA/s512/P6210539.JPG Unused parts. Far left are two Non-Foulers and the tap below http://lh6.ggpht.com/_9EMyKcng_yA/Sj642gKRNiI/AAAAAAAACLQ/qRpWORpAySA/s512/P6210540.JPG Hope this helps someone! -
I was thinking about installing a Venture Dash Accent trim kit. I was wondering if anyone had one installed and what you thought of it? I know Yamaha makes 2 (Wood and Aluminum) and found another vendor who will create the exact same kit in any one of about 20 finishes. Was curious the good / bad expierences? Any photos would be greatly appreciate of what you have installed. Thanks in advance.. Stuart
-
Alan (hubby) and a friend finally had time to fit the Wedgetail Outrider (Voyager) on the weekend. It's not ready for me to ride yet, need to change handlebars and floorboards, and make holders for my elbow crutches yet--but we are getting there For those wondering what that is on my front wheel it's a leading link suspension. It was on for the sidecar, and an engineer told me to leave it on for the conversion. He has the (Voyager) kit on his Goldwing, so I guess he knows what he is talking about It moves the centre of the axle forward, rake angle changed too. Makes it like power steering when you turn
-
http://www.tabortrikesusa.com/yamaha.html Does anyone run this trike kit?
-
JUST WANTED TO SAY THANKS TO ALL FOR THE HELP, INFORMATION AND PARTS GOT MY LOWERING KIT REMOVED LAST NIGHT AND RETURNED IT TO STOCK HEIGHT WHAT A DIFFERENCE!!!! FEELS LIKE I BOUGHT A DIFFERENT BIKE ALL TOGETHER THE HANDLING IS MUCH MUCH BETTER. FEET AND LEGS FEEL ALOT BETTER BEING, 6'6" THAT LOWERING KIT WAS HARD ON THE LEGS AT THE STOPS FELT WAY TO LOW ITS PERFECT NOW!!! GONNA HAVE TO GET OUT THE WEEKEND AND GET ALOT OF SADDLE TIME THANKS AGAIN TO ALL
-
I bought a 2000 Mercury Grand Marquis 2 weeks ago and the headlights were horrible on it. I priced new ones and about choked. I saw Walmart did a headlight restoration for $40. I found out it's just a 3M kit that anyone can buy for $20 at VatoZone, Oreilly's,Napa, or Advance Auto. I tried the Meguiar's PlastX and spent an hour polishing them by hand. They looked better but they were still cloudy. I broke down and bought the 3M kit this morning after watching some youtube videos on headlight restoration. This kit works great. My headlights are crystal clear like new. If you have yellow, foggy, or cloudy headlights, this is a MUST!! You don't need the kit to do this. If you have very fine sandpaper (2000 grit or finer), then you could do this yourself by hand. I had no sandpaper nor do I have a polishing pad so the kit was more economical for me. The kit comes with 2 different sanding discs, a 3000 grit sanding pad, a polishing pad, an arbor and Velcro pad to attach the sanding discs and pad to, and some 3M plastic polish. You start out with an 800 grit paper and completely sand the headlight until the entire lens is a uniform texture. Next, sand it with a 2000 grit paper until all the there is a finer uniform texture. Then, use the 3000 grit sanding pad and water to sand all the scratches out of it. Finally, use the polishing pad and plastic polish to bring the headlight to crystal clear shine. Be very careful to keep the sanding discs clean. I apparently had something on one of my discs and now have some tiny little swirlly scratches in my left headlight. I can only see them at certain angles and I can feel them with my fingernail. I could probably sand the lens down some more and polish it out, but I'm very happy with the current results. I also removed three molded tits off the headlight lens. I took a rotary tool and ground them down flush and the 3M kit polished them out smooth. http://img183.imageshack.us/img183/650/1000563small.jpghttp://img265.imageshack.us/img265/8449/1000564small.jpghttp://img176.imageshack.us/img176/4675/1000565small.jpghttp://img269.imageshack.us/img269/6892/1000566small.jpghttp://img176.imageshack.us/img176/406/1000569small.jpghttp://img190.imageshack.us/img190/1906/1000570small.jpghttp://img196.imageshack.us/img196/3530/1000571small.jpghttp://img44.imageshack.us/img44/9899/1000576small.jpg
-
My RSTC has jardines on it and they sound good. BUT, I am wanting to go to the 4 into 2 style. I have read that some guys have used Harley pipes to do this. Or, are there kit out there for this application. I want a deeper sound than the Jardines, that is why I am researching this. Thanks. -
WHAT IS THE BEST L.E.D. kit to add to my Venture????
-
I just got off the phone with PCW and ordered a clutch kit for my 99 Venture. Well not the whole clutch kit, but the new improved spring, gasket, and full clutch disk. The guy I talked to was great. He asked me some questions about my bike to make sure I was ordering the right stuff for my situation. He didn't try to over sell me on anything. I mentioned this site and he said he has dealt with many of us here and everyone he has dealt with has had good success with these kits, even the trailer pullers. So does anyone have any feedback on how they liked the PCW kit, or how it is working. Any suggestions or things I should look for while doing the repair? Also is it something I should save and do at M.D. at Freebirds. I should be getting the parts on Monday or Tuesday, HOWS THAT FOR SERVICE!!! Big Mike....Who cant wait for M. D. YEEEHAWWW
-
I am going to be installing the flanders kit. Does any of our members run the flanders with risers? If any of you have flanders and used the barrons risers, will the cables and brake lines that come with the kit be long enough? I believe that I will need to use risers as well to get the arm position that I desire.
-
.thumb.jpg.bea94b2fb3a7dc72d417d9ffb4f4fc28.jpg)
At MarCarl's VentureIn event, a few members suggested that I post an idea for mounting running lights that dosen't require brackets. I mounted a pair of "Xreme" 55w lights just below the fairing and beside the rad side wings by removing the top threaded screw holding the aluminum side piece and using a longer threaded screw in its place to hold the lights in place. In my cse, I inserted a half inch spacer so the light that I used were in a perfect position. You can judge for yourelf whether the location looks good for you, but it sure functions well. Also, with "Xtreme" lighting kit that I bought (the oval shaped lights), everything needed came with the kit to install it directly to the battery (with an in line fuse) and to locate the switch inside the gas cap area. Didn't have to cut a single wire or drill holes. I may mount a switch on my dash some day, but for now, the location works surprisingly well as I can easily switch the lights on or off when I am riding. -
Does anyone know if there is an LED Brake Light kit for the RSTD? I want to switch out the entire brake light assembly, and have a full LED kit. I find the LED lights on other bike just amazing. And it seems like a safety issue as well. Is there an aftermarket kit available that does not require extensive re-wiring? Any help most appreciated. Sonny
.thumb.jpg.4e1b3809c4633f365ba67afc212f21df.jpg){kind=avatar}
.thumb.JPG.d5e9dc2577881cdaebb03b8a182e00b6.JPG)
.thumb.JPG.a7ecab44ca5a487b6c43626aaa290fcc.JPG)
