Search the Community
Showing results for tags 'backrest'.
-
I am looking for a Utopia studded backrest for my 2004 Midnite Venture. I have a Utopia backrest on the bike right now in new condition but it is the plain style and doesn't match the seat. Just out of curiosity, does anyone have one they want to part with or trade for the one I have. I can send pics if you need more info.
-
I need the chrome back fender rails from a RSTD....the ones that the quick release backrest snaps onto. If anyone knows of any please let me know. Thank you......
-
I have a 1985 VR with the large top box. I bought a black backrest on ebay, but, it is for the smaller top box. Anyone need a very nice black backrest?
-
What a great addition to my wing.Put on a Kuryakyn backrest and highway pegs what a difference especially the backrest. Did a 400 mile trip to naples Fl no back pain very comfortable ride. Highway pegs are ok but i don't like the way my legs wrap around the motor. Seems a little ac ward may have to try some floor boards. Also put on some baker hand wings there great keep a lot of wind off your hands. Can't wait to get the lower baker wings.
-
As some of you might remember I tried to give this driver backrest away for free on a guessing game to some member who was in need of one. However we had a couple of winners but they were playing the game to get it for a friend. ( I MAY OF MISLEAD OR MADE A MISTAKE IN HOW THE GAME WAS SUPPOSE TO WORK AND IF I DID I AM SORRY) I still had the RSTD driver backrest and didn't know what to do with it,so I now see that a person here on the board that has been here through thick and thin and is now at a hard time in her life. So I decided to get a hold of Don (freebird) and auction it off to the highest bidder. I myself don't have a lot of cash like a lot of people in today's world but wanted to help so this is what I decide to do. So all you RSTD owners that was involved in the game last time I apologize. So now I am asking if anyone needs a driver backrest for a RSTD please help out and bid. This is a good cause, and again I appologize. Star4772
-
Went for a ride this morning and my CB will not turn on. Radio worked fine. CB has been working fine until this morning. Tried a search on here, but the words CB and on are too short to use as keywords...:-) I did recently have the seat off to install an Ultimate backrest. I'm not sure where the CB is, but there are wires that run along the top of the rear fender under the seat. Did I mess something up with them? Open for ideas on what to start checking. Scott....
-
Being a new (to me) 06 RSTD owner, was wondering how others handle traveling with the bikes quick release components. Wife and I have taken several overnight trips recently, and we always pull the windshield and backrest at the end of the day and take to our room. No biggee really except we're pretty spontaneous which usually results in an upstairs room. The dang organized folks get the first level. Anyone have theft problems with these items when on the road or public parked? Any creative locking solutions? -
Well with a little help from Carbon one making the adapter plate we were able to get the trunk at least mounted to see what it looks like. I think it will look pretty good after trunk is painted to match. and the backrest and armrest are redone in black also a good cleanup of the chrome and mounting bracket. What do you all think?? The detachable backrest is straped to the back. Joe star4772 If anyone needs anything done I highly recommand Larry Carbon one He is just amazing. Attached Thumbnails
-
Well went and picked up the trunk that I will put on my RSTD. I took backrest off and positioned the trunk on the back and cool. Once I get the rack installed and the trunk all painted to mach and the backrest and armrest and pockets done in Black material it will look great. It is a trunk off an aspencade with trunk rack,side rails and also rear lights built into the trunk. The lines of the trunk I think will look good with the sadle bag lines seems to all kind of blend in. Cant wait to get ur done. star4772 :)
-
Well with a little help from Carbon one making the adapter plate we were able to get the trunk at least mounted to see what it looks like. I think it will look pretty good after trunk is painted to match. and the backrest and armrest are redone in black also a good cleanup of the chrome and mounting bracket. What do you all think?? The detachable backrest is straped to the back. Joe star4772 If anyone needs anything done I highly recommand Larry Carbon one He is just amazing.
-
I picked up a used VentureLine backrest. I'd like to replace the nylon friction washer beneath the hangers due to deterioration. But, can't seem to figure out the trick. The diamond shaped part in the middle rotates 90°. The hex keyed screw in the center will turn either direction without any effect that I can tell. And the chromed plastic cover won't come off without applying force and I'm reluctant to do that without knowing that's the thing to do. Anyone have experience with these things? http://i112.photobucket.com/albums/n163/coy55boy/83%20Venture%20Royale/backresthanger.jpg
-
Three of the St. Jude auctions are over and the winners are............... 1st Gen Backrest Brackets.............Yammer.............$11.00 Backrest Pad...............................Mbrood.............$26.00 J&M Headsets (2).........................Buddy..............$70.00 Congratulations and many thanks for your support of St. Jude Children's Research Hospital. You can pay for them with PayPal at this address... partin_guy@yahoo.com Please mark you payment as a donation or gift so no fees will be taken out and the kids will get the whole amount you bid. Thanks again
-
wife and i took a ride Saturday from Randleman NC to Lynchburg Va. - what has made longer distance rides more pleasurable is the Hoppe Fairing, Utopia backrest, gel pad (walmart), Butler seat mods, tour pack w/ dual padded backrest and highway pegs. i used to get only about 50 miles before my butt was unhappy but can get 100 miles before discomfort begins. i love the cruise and use it constantly. hopefully my next addition to our riding experience will be a communication set for wife and i - it would be nice to chat while riding thru the country. my 07 RSTD rocks, i've had it over two years and put approx. 18K on it, mostly two up. if i had to do it over i would have purcahse the venture but i am happy with my ride !! just wanted to share some happiness. buz
-
I removed the trunk on my 2004 RSV and purchased a 2005 RSTD quick release backrest on e-bay. I went to look at a RSTD to see what I would need to make it work. The rubber mounts and bolts shouldn't be any problem but there is a welded pin on the RSTD mount that secures the backrest. Has anyone been able to make this work in the past or is there a bracket(even if I have to bolt on and off) that will allow me to use the passenger backrest on my RSV? Thanks...
-
http://cgi.ebay.com/ebaymotors/Yamaha-Royal-Star-Venture-Utopia-driver-backrest-/280551056609?pt=Motorcycles_Parts_Accessories Thought this might be great deal for somebody. Trying to find a 86 - 93 one but when I'm going any distance I have my bag back there and don't really need it.
-
THIS IS THE ORIGINAL POST http://www.venturerider.org/forum/showthread.php?t=51853 OK HERE IS THE CLUE FOR THE FREE BACKREST. PLEASE POST YOUR NUMBER HERE. IF YOU HAVE ALREADY GUESSED A NUMBER YOU CAN TRY AGAIN. GOOD LUCK. THE CLUE IS A SONG TITLE BY: SAMMY HAGER IF NO ONE GETS IT BY MIDNIGHT EST. TONIGHT THE CLOSEST TO THE NUMBER WILL WIN. JOE, STAR4772
-
Free backrest for a RSTD for the cost of shipping and a donation to ST. jude's for what you think it's worth after you receive and inspect it. I got this from Mikealiasmike who is a member the same way. However I think I want the other style like the RSV. You can see a picture of this one at www.protac.net This is how it will work. I am thinking of a number between 1 and 100 the first person to get the number right will win the backrest. Please post only 1 number per member, also please be honest if you need it for your personal bike then submit you post otherwise let another member try and win. NOT FOR RESALE Thanks Joe star4772 (Hope this is fair to everyone) GOOD LUCK AND THE # IS **
-
I just wanted to say thank you to utopia as well as everyone else who posted input about drivers backrests. Because of the input, I recently purchased a new drivers backrest for my 2005 RSTD. Installation was very easy. I did drill out the holes a bit larger. The backrest is very comfortable, I put on 1000 miles last week to and from Sturgis SD last week. Highly reccommend!!!!
-
A backrest for a RSTD they want to get rid of or where I might find one? Joe
-
Second choice painted to match? I would have to figure out a backrest for it but its brand new.
-
Hello Everyone: I am looking to add a drivers backrest to my 2005 RSTD. Does anyone have one that they would like to sell? I thought I would ask first before buying a new one. Thanks in advance......
-
Ok, I put a Utopia backrest on the bike and I'm wondering where you taller riders have it adjusted. So far, I have it as far down as possible and as far back as I can get it. I'm not sure if I like the thing to be honest. Might take it off the bike before I ride to Oberlin. Maybe a long trip is just the thing I need to decide weather to keep it or not. I've never rode a bike before with a backrest and it's a bit weird to me.
-
For those deciding on a drivers backrest. I recently purchased and installed a Bakup backrest. The installation is simple, however, an extra set of hands is helpful to avoid possibly scratching something. The pad matches the stock passenger pad closely and the overall look is clean. Seat adjustment is easy, no tools needed. The backrest is a little pricey, but the quality and look is good. To me, the stock seat is comfortable enough, all it needed was a backrest. I figured I saved $300.00 by not having to buy a Mustang seat with a backrest.
-
Based on the recommendation of some here, I installed a Utopia backrest on my '06 Midnight Venture. The install couldn't be easier and what a tremendous difference, no backstrain or tension. Also, no more slouching and hurting my bad back. If you need a backrest, Utopia has m vote.
-
Does anyone have a wrap around passenger backrest pillow top style? I saw the one for sale by Yamaha and Corbin but it is not the right finish. I would like to purchase one but I can not find the right style for my 05 RSV. Does anyone have any idea where I could buy one? Gaetan
.thumb.JPG.bfcefdc0995aabc77d6b4e8cf9125c91.JPG)
