Search the Community
Showing results for tags 'passenger'.
-
I removed the trunk on my 2004 RSV and purchased a 2005 RSTD quick release backrest on e-bay. I went to look at a RSTD to see what I would need to make it work. The rubber mounts and bolts shouldn't be any problem but there is a welded pin on the RSTD mount that secures the backrest. Has anyone been able to make this work in the past or is there a bracket(even if I have to bolt on and off) that will allow me to use the passenger backrest on my RSV? Thanks...
-
I am looking for passenger armrests for my 04 RSV - any suggestions?
-
I have a very small "weep hole"(maybe 1/16in.) on each side of my exhaust pipes probably located just below the passenger foot rest---are these factory or do you suppose someone added them ------Thanx........................Larry
-
I have a 1993 GMC 1500 that I am restoring my ? is I replaced the ac compressor and dryer with all new o-rings and it works great but I get a drip of water running on the passenger side floor any idea what is causing this?
-
I am looking for the center rubber on passenger floorboard for a 1986 Venture Royale
-
OK, the backseat boss and I got some new helmets and would like to set up some comms. Unfortunately I now realize that the bike I bought doesn't have the passenger control for the intercom, CB, etc.. Does anyone have a working one off a parts bike they would be willing to give up? Please let me know! I found it on the parts websites, but that price is a little steep to swallow. Is there an alternative device I could plug in to allow her and I to both use the intercom/CB or however that works and listen to the radio. Thanks! Todd
-
A friend of mine is looking for a Venture Pillow top PASSENGER Seat..... Contact me if you have one.....
-
Evening all, I am looking for a pair of Venture passenger grab bars to put on my 08 RSTD. I am going to bolt the front of the grab bar on the fender bracket (just like on a Venture) and then fabricate something to hold them together behind the seat with a mount running to my rear seat bolt. I want to do this so I can add the Venture passenger arm rests that Diamond Accessories sells. We are headed to Deals Gap in July to run the Dragon and go to Star Days. I am trying to make my wife's ride a little more comfortable without putting on the entire Venture pack (too expensive). I have a Corbin seat which we both like so I don't want to replace it. I have tried Pinwall cycle but they don't have any. Any one got another source for used bike parts or maybe have a set on a shelf in their garage that they would want to sell? -
Just curious ... What is the biggest load anyone has put IN and ON their trunk (luggage rack). I am leaving tomorrow for a long trip (1 week to the Grand Canyon). I can put my ROLL BAG on the passenger seat (I'm riding solo), but the trunk is full too...Will I be OK. I am thinking maybe the roll bag is about 20 lbs and the trunk another 25-30lbs. Any experiences? Wally
-
Does anyone have a wrap around passenger backrest pillow top style? I saw the one for sale by Yamaha and Corbin but it is not the right finish. I would like to purchase one but I can not find the right style for my 05 RSV. Does anyone have any idea where I could buy one? Gaetan
-
I have a 1998 Royal Star Boulevard xvz 1300a and I am looking for a passenger backrest. Can anyone direct me to a company that makes backrests or seats for my bike?
-
Ok, I removed the passenger set to secure one of the HSH (Holy S**T Handles) and go to reattach the seat and I realize that one of the screws/bolts are stripped. I would be willing to accept the blame; however, it never tightened completed. Now I realize I can't get it back out again should I need to tighten the HSH again. That being said, again I would like to proclaim to the world my ignorance of all things mechanical. So now my problem is how do I get this bolt/screw without having to take it to the dealer and have him charge me for what they probably did in the first place. Or is this something that I am going to need help from a more mechanically apt and better stocked individual. TIA P.S. I was only able to take off the passenger seat because I happened to read in here somewhere that the bolts for the passenger seat was located under the driver's seat. P.P.S. I was also only able to remove the driver's seat through the gracious and kindness of another individual here who walked me through removing it on the phone - lol. Did I mention I am totally mechanically inept. It is sooo bad, that the Air Force almost did not let me enlist because of the mechaniccal portion of the ASVAB even though I scored off the charts on everything else. Again, TIA:bowdown::bowdown::bowdown: -
Talked with Hannigan Motor Sports this morning about the auxiliary fuel tank they will be offering for their trike conversion kit. It is still in R&D and no date is available as to when it will be available. The tank will be 5 gallons. It will be placed under the passenger seat and a filler nozzle nearby with key The unit will not be a gravity fed unit and will have a pump and switch. The price with be just under 700.00 and does not include installation.
-
No, not what you think. Just curious if there is a "trick" to the passenger getting off the bike without looking like they are falling off the bike. How does your passenger dismount? Keep it clean. Wally
-
I was trying to find the post about a member making some off-set brackets last year to make it so his wife's legs would go down farther on the passenger floor boards . but I can not seem to find it in the search. I am looking for the post for another RSV Owner any help would be great. Thanks, Jeff
-
Has anyone tried the passenger backrest in accessories book? My wife would like it to wrap around her a little more. She is only 5 ft 2" tall. Can you still move your arms around with the new one? Any help would be great. Rich
-
Tried finding this already.. can't find a thread with the info. I just got all the wires and all for my intercom headsets. I, however, use a half helmet and would like to hear all audio out of the speakers. Passenger wants helmet speakers. I can hear CB & radio out of speakers, but not getting any intercom. Any tips? Or does intercom not go through speakers?
-
I'm wondering if there is a SC Venture owner with passenger arm rests installed that would be willing to meet up with me, so I can check out your arm rests? Mainly have my nine year old passenger check them out and see if she can even reach the rests? I've looked at many variations of passenger arm rests, my dilemma is that they seem to sit way forward of where her arms would comfortably reach, which would defeat the purpose of me funding a set. The days are warming up and are getting longer, so we could meet pretty much meet up with you anywhere in our state.
-
Another newbie question. There is a handle by the passenger seat, if I follow the cable it goes to the passenger backrest. What is this supposed to do? I pulled up on the lever and I think it is supposed to allow access to the rear compartment? Thanks in advance, Don -
For those who have the Drag Specialties driver's backrest on their MKI & MKII, do you still have room for the passenger? I put one on my MKI this winter and I sat on the back to see how much room there was for a passenger. It felt kind of tight. And I'm not a real big guy around the middle. A bit more that average, but not a lot. Plus my knees felt like they have to quite a ways apart to get around the supports. Anybody have them on their scoots and are able to have a passenger still ride with it in place? Thanks, Bill -
I have a 2000 royal star venture and the clutch is slipping in 4th and 5th gear. When you get on the gas real hard. Changed clutch fluid. And it's still slipping. I have about 65,000 on the bike. Don't ride that hard. And no passenger (she rides her own) Where should I start with the spring plate or clutch disc. thanks Michael
-
Would anyone know if a Venture rear passenger seat would fit my 07 RSTD? My wife says the seat I have is uncomfortable after about 40 minutes. I have the Ultimate seats...looking for a more comfortable rear seat. Any suggestions? Thanks Mark
-
I was wondering if anyone installed heated grips for the passenger on the grab bars? is there any way of adding such a thing? when my wife and I ride colder days her hands get really cold and she ends up riding with snowmobile mittens, this eliminates her ability to grab anything. I figured that if I could give her a heated grip that would solve a lot of issues. Any ideas?
-
Windscreen is too high...Need a replacement I don't have to look through. Was also concerned about buffeting for my passenger. Any thoughts?
-
I was wondering if somebody had one and do you like it? Also, does the vent cut down passenger buffeting and does rain come through when it's closed?
.thumb.jpg.176b2ebbe9863175975d94710375c414.jpg)
.thumb.jpg.52ba0e00e18012fe3f3a50e3e1f8a113.jpg)
