Search the Community
Showing results for tags 'fit'.
-
I cant find ANYTHING.... is there any replacement pegs aftermarket for the driver? my rubber covers on my 83 are getting really tattered. Who found any aftermarket chrome ones that will fit where the stock pegs go? I'd love a set of ISO wing pegs, but I cant find what adapters to order to make them fit the 1st gen MK1 Some of you out there HAS to be running aftermarket pegs... What did you buy? -
Does anyone know where I can get the inside dimensions for the RSV bags? I'd like to figure out what size carry bag I might be able to take with me when I fly up to get my '01 tomorrow. I can always just carry a few things in a paper gift bag if need be, but if I knew the inner dimensions I could take something that will fit right in. I've got a few different choices here from lunch coolers (I know these would fit) to a KLR650 tail bag (17x11x6 I think). I was told a 16.5x14 laptop case will fit in the tour pack, so I'll have my laptop bag there with room for a few more items. I don't have the height available in the tour pack though, so if the tour pack dimensions are known that would be nice to. -
I hope someone out there can tell me this. Will the trunk reflector from an 86 up 1st Gen fit an 85 trunk? They LOOK the same. Wayne
-
07 venture...left rear coil.....vacation planned for a year...supposed to leave this saturday....i need that coil...anyone here have one....need fed exed....... supposedly, a coil from a 1st gen will fit...but don't know if it will work...it is a different part number...so any guru's here that can answer that
-
I notice that some have a hard time finding some maintenance items we need for our bikes... OR some are marked up so high that we don't WANT to get them from Yamaha. I've worked in auto parts for the last 30 years so I used that experience to find a few alternatives. They are parts that will fit and are easier to find or they are less expensive than factory but they are all available at either Nissan,Toyota or Honda car dealers. It's only a few numbers now but if I find more I'll add to them. Parts List
-
Have been offered a set of 99 hd electraglide mufflers, how hard are they to make fit? Is it even feasible? Any advantage as to mileage? Thanks
-
I have a 2007 royal star tour delux. I am looking for the armrest that would fit the backrest or the venture trunk,backrest, and armrest.
-
Clutch lever for an 83 1st gen ..... surely someone has one laying around or knows of an aftermarket that would fit ? Steve
-
Will a '86 chin cowling fit an '84 VR?
-
Ok - How many have installed their MAC mufflers? I got mine with the last group purchase. They came in pre-rusted for me. Condor got them sent back for another set. The second set won't hang correctly. I had to die grind one slot (left) to get vertical alignment. It needed to go up. Would have rather ground the right to go down but there would not have been a slot left! Now as I look, the left muffler sticks out from under the bumper about an inch. The right is recessed under about the same. Maybe I am too picky. However I notice it when I look at the rear of the bike. Anyone else encounter problems or am I looking crooked? The stock mufflers fit perfect, I put them back on just to measure!! JB -
I would like to put the cobra fatty highway bars on my 98 royalstar, but they dont make the fattys for it. GD Cobra all to H**L lol!!! anyways does anyone know about how to get them to fit? would the road star ones fit possibly or maybe the roadliner? anybody wanna bend me some up for a fee? lol:fireman: -
Hi guys was looking and found these they are for a Goldwing, but I was wondering if anyone has used them on a Venture. http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2002430/c-10111/Nty-1/p-2002430/Ntx-mode+matchallpartial/N-10111/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=saddlebag+rails Thanks, Paul
-
I have a seat that appears to be a Corbin studded with back pilon passenger. Curious if anybody know what years it will fit besides 99 which it came off of. Thanks and God Bless. Mike
-
Finally pulled my TCI out for a "shake and bake", took the cover off and discovered a lot of battery acid fume corrosion from where the PO had taken the vent hose off the battery. That's the reason I had to repaint the frame last year when I did my second gear. Soooo, not sure if the board is affected way down deep in it's recesses, I'm looking for another TCI to fit an '84. Anybody got one they want to part with in good shape? I've got a few days as I also pulled the carbs to clean out. Appreciate your help, Dan
-
When Circuit City closed I bought a battery I had hoped would fit my little HD camera but it was the wrong one. Close but no cigar. Soooo, I have a replacement for the CGA-S005A battery available for the asking. Either that or I go out and buy yet another camera that it will fit, like I need another camera... If you can use this send me a PM with your address and I wil send it out to you.
-
I'm ready for tires, and extremely hesitant about downsizing my front tire, mainly because I can't get a single mechanic or shop to say that it will fit my rim. I know many here have done it with the Avons, but does anyone have the 130-90-16 Dunlop E-3 on the front of their RSV with the stock rim? Any issues whatsoever?
-
I am looking to replace the bags on my 06 RSTD with some custom stretched ones, but I'm having a little trouble finding some. They all seem to be made to fit harleys. Also, I would like to find a fairing that I could detach like the windshield. Any suggestions would be greatly appreciated. -
I purchased a Show Chrome radiator cover from JC Whitney. Catalogue said it would fit all 2nd generation Ventures. I have a 2007. When I opened the box to install the instructions say it will fit 1999-2002 only. Called JC Whitney and they called Show Chrome who said it might fit or it might need slight modification. Since I have to dismantle quite a few parts to install I would like to know for sure if it will fit. I like the look of the cover (only one I have found in chrome). Has anyone purchased and installed one of these. If so, will it fit as is or what kind on modification if not. Thanks. -
Do you think this will fit a venture? http://www.saber-cycle.com/store/Saddlebag1.html
-
I thought I read somewhere that the the rear rack from the early Royal Star (1998) that mounts to the rear seat bolt and the license bracket would fit the RSTD but can't find the thread now. Could someone confirm that this works? I attached some photos of the rack for reference. Thanks! RSTDddog -
Let me see if I get this. If the Road King mufflers fit with only a couple of custom make brackets, then say Vance and Hines mufflers should fit with custom made brackets. True? If so that opens a lot of doors when it comes to changing exhaust.
-
does anyone know of any other jap bike discs that will fit 83 venture royale
-
…one of these; [ame= ] [/ame] Hum-m-m... I wonder if this will fit on a Venture…
-
Does a Markland hitch off an 84 fit on a 1987 VR? There is an 84 takeoff on eBay and I have been looking for a hitch for my 87. Anybody have one they want to sell? Thanks
-
While at my dealers today he asked me if I wanted all 4 cams for a VMax new and in the box's. I asked how much and he said $150.00 for all 4. Does anyone here want them for their project bike I dont think I should make my bike any faster than it is.The cops are really looking at me hard here lately.No need to push my luck any more than I do. He said that they fit the 90 to 2005 V Max so if anyone wants them let me know and I will help you get your hands on them. Jeff
(Custom).thumb.JPG.9e28ea2111ab3dc9d16dacf3023dbe7d.JPG)
