Jump to content

LLonearth

Expired Membership
 View Profile  See their activity

  • Posts

    33

  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Name
    Larry

location

  • Location
    Downstate IL (summer, United States

Converted

  • City
    Downstate IL (summer

Converted

  • Home Country
    United States

Converted

  • Bike Year and Model
    87 venture royale
  1. LLonearth
    I finally found the speedo gear for the front axle and need to replace the old one. Are there any shortcuts? The bearings were replaced last year and I only want to get this different speedo gear in place to see if that fixes my speedometer and cruise problem. Thanks for any help. 1987 VR. Larry
  2. LLonearth
    When I checked the cable ends at first, I had to remove the headlight to get at the upper connection to the back of the speedo. Not too easy with big fingers but it was tight and, as I mentioned, when I manually spun the core, the odometer moved so I concluded that portion was functional. It sure seems like it could be the front axle gearing for the cable. Thanks for the reply, though.
  3. LLonearth
    Well, I just pulled the cable core out and it looks fine, long and square ends. It could be the part on the front axle may have broken. I guess I'll have to pull the front wheel off sometime but will wait till I find the spare I have somewhere or else order one off fleabay.
  4. LLonearth
    Thanks for the replies. I, too, suspect the mechanical components, as the cruise was working just fine until the speedo quit. When I checked the cable by turning manually I noticed I could pull the core out. Is that normal or does it indicate the core is broken? I could pull the core all the way out and measure it or see a broken spot. Does anyone know the normal length? Thanks.
  5. LLonearth
    My 87 Venture's speedometer just stopped working. I have checked the connections and when I checked the cable on the front wheel I spun the cable manually and it changed the odometer so it is apparently connected at the top. I was on the highway today and when I tried to engage the cruise the power light came on but I could not "set" a speed. Does the cruise control work off the speedo cable? Could something at the front wheel connection be loose or broken? I have the rotor covers so it is somewhat of a problem getting at the connection. Thanks for any help.
  6. LLonearth
    At the other end of the price spectrum, look at http://www.gezagear.com/index.htm
  7. LLonearth
    We can ride pretty much all winter here in Mercedes, TX (way down in the Rio Grande Valley) except of course, yesterday and today while it is raining and cold, cold, cold...only supposed to get to mid-50's today. After way too many winters in Iowa, I know we won't get any sympathy from anyone still up North.
  8. LLonearth
    You may already know this but in case you do not, the rear brake is linked to the left front rotor also and there is another bleeder point by the top of the right front fork.
  9. LLonearth
    Please don't forget about us poor souls suffering down in the Rio Grande Valley. Today Mercedes is supposed to be sunny and 85. I am planning to ride over to Progresso for some cheap tequila and Kahlua. Somebody's gotta do it.
  10. LLonearth
    Thanks, guys. Let me get settled down here in Mercedes, TX and I'll get back to you. You're right, it could have been much worse. There was that one moment where I could have pulled real hard and pulled the bike the other way which could have resulted in me falling backwards and the bike then falling on me. Nothing was damaged except for my bike and my pride. Not so bad as I have been working on being more humble.
  11. LLonearth
    I must have had a worse day...just cannot remember it now. As I was winching the 87 VR up on the Volvo semi for the trip to the Rio Grande Valley for the winter I slipped on the ramp and lost my balance which resulted in a drop test from about 2.5 feet. It landed on the right handlebar which bent severely and main fairing which cracked in several places. I guess my stupidity will cost me 5$? Not to mention much more than that in plastic repairs. Does the stupid fund accept Paypal? I have a spare handlebar but need another right fairing and the parts that hold the speaker and a right front turn signal. I'll be monitoring ebay but wondered if any here had spares for sale. Thanks. Larry
  12. LLonearth
    Do you need to change the jets when you put these on? If so, to what size?
  13. LLonearth
    I have winched my 87 VR up into my Volvo semi truck two or three time and am curious about any potential damage to the forks. I found a thick tree strap (for ATVs with a winch) that wraps around the forks just above the fork brace and clears the front tire. I then winch the bike up a 14 foot ramp and have had no problems. The bike steers and tracks just fine after I get it down but I don't want to cause future problems. It looks like I could rig up a longer strap which could connect on the lower crash bars and clear the front wheel if I am doing this the wrong way. Any input on potentially damaging the forks with this procedure? Thanks.
  14. LLonearth
    In January, we're in Mercedes, TX, where you can ride all winter! Don't mean to be mean...I did my time in many years in Iowa winters. I'll try the WD-40 before I take the switch housing apart. Thanks for the input everyone. I was concerned about springs flying around. Might still have to split the housing.
  15. LLonearth
    Suddenly, my starter button went from silky smooth to hard to push. It doesn't hang up and keep grinding the starter. My first inclination was to remove that one screw on the bottom and "start exploring" but I thought to first check in here to see if that is wise. I did spray contact cleaner all around the switch without any success. Thanks for any input.
×
×
  • Create New...