Jump to content

Cougar

Expired Membership
 View Profile  See their activity

  • Posts

    3,845

  • Joined

  • Last visited

 Content Type 

Everything posted by Cougar

  1. Cougar
    And I took this all apart for nothing? (I just could not sleep last night over this washer) But boy and sure can change a basket out fast now!
  2. Cougar
    maybe in lamins term squeeze is saying if the notches are on there , in short once it reaches the open area. there will be less to move around? make since? hehehe
  3. Cougar
    Right. I even pulled the clutch basket all the way off to make sure if there where any splines to go onto but there is none. I remember when I first slide the friction basket off that washer was perfectly on the back side of it. with the oil keeping it in place I guess. but I agree why did they add the teeth to the thrust washer? when there is nothing to hold it at the end? Squeeze huh? so look at my pictures again please. I just am not understanding yet
  4. Cougar
    I need to know if this is correct. [ATTACH]43583[/ATTACH] [ATTACH]43584[/ATTACH] [ATTACH]43585[/ATTACH] [ATTACH]43586[/ATTACH] [ATTACH]43587[/ATTACH] The thrust washer that is behind the basket that holds all the friction disks , It goes on the splines and then drops onto the flat round part leaving space and wiggles around is this correct ? There are no splines after that and under the clutch basket it self. Just wanted to make sure. Thanks, Jeff
  5. Cougar
    ~~
  6. Cougar
    Owen, They say to guard the clutch lever while doing this procedure. If you happened to push in on the clutch lever while doing this project , . just what I read someplace ,they say to rubber band foam or whatever so it does not engage while nothing is in the basket. my thinking is if it did go in, maybe air in the line? not sure. I am sure the experts will chime in soon. was it OK before you started taking it all apart? Jeff
  7. Cougar
    Skydoc will send you a new clutch spring/friction disk and a gasket, and thats that. real simple to do.
  8. Cougar
    The fouled plug should look wet/darker
  9. Cougar
    one fouled plug. my vote
  10. Cougar
    TDbiker, look at the TOP of SilvrT's Picture and you will notice the (G) scribed into the basket.
  11. Cougar
    My thinking was not for a GPS at all. but for other things. *top secret of course* now frigging way I would put my GPS that low onto a bike.
  12. Cougar
    I am thinking stay will a regular motorcycle tire on the front. I would think that a C/T on the front would make steering impossible. but let the expert car tire folks tell ya ! With My Hannigan there are Michelin all season tires on the rear. and I run a Bike tire up front. Jeff
  13. Cougar
    Do a Goggle search for Star Parts , what your seeing is the hood's (Headlight Visor)for the headlight and also some of us use the little hoods for the blinkers as well. you should have no problem in ordering them. try eBay maybe? there not that expensive . there are plenty of vender's out there that have them also. someone here will give you a link most likely here soon. good luck, Jeff Here ya go http://www.google.com/search?q=Star%20parts%20Headlight%20Visor&btnG=Google+Search
  14. Cougar
    What a great idea, thanks for sharing that. I will tell you how I like it later
  15. Cougar
    You do not know until you pull it out. I do not have any idea if they install the (I) basket at the factory or not. the markings are on the back of the basket. Jeff
  16. Cougar
    That Otta work , Yep !
  17. Cougar
    We can do that to ! don't forget the May gasket as well
  18. Cougar
    YES , I WILL BRING IT!
  19. Cougar
    Guys , if these are falling off-there are not installed properly.ya gatta get the right curve and right angle, and use rubbing alcohol. but if already applied, to late. you will have to start over with new velcro. Jeff
  20. Cougar
    AND STILL .. SAND, SAND and MORE SAND.. out there.! BE SAFE...
  21. Cougar
    ~
  22. Cougar
    :rolleyes:I just found out today after all these years that J&P is in my state:confused24: and ONLY about 45 mins away from me I guess I need to go to there open house and ride-in's once in a while now. what a dummy! could have been saving on shipping all this time and man 1 day shipping all the time sheesh I thought that was fast. OH MY, I will go back to hanging my head in shame now. and yes I thought I would share this finding with you all *LOL And thanks for the tip on the LED's they are great. Jeff
  23. Cougar
    ~~
  24. Cougar
    I am sure by now you have learned to put it into gear when you park OR it will end up in another place when you come out of Walmart ! Just remember that extra Width at the gas pumps.
  25. Cougar
    So ya got it done? and NO PICTURES? Oh MY.. I thought you knew the rules. I dunno, when I first jumped on the Hannigan. It was so easy to steer and ride for myself. I thought it was much harder to learn my ZTR Mower though. You will grow to love it. Jeff
×
×
  • Create New...