Jump to content

Rocket

Expired Membership
 View Profile  See their activity

  • Posts

    2,485

  • Joined

  • Last visited

 Content Type 

Everything posted by Rocket

  1. Rocket
    Try your local dealer, last I looked they were still available new & prior to the recent price increase on parts, they were about $20.
  2. Rocket
    It would have been much worse, if it was a full sized pic of Squidley & not a reduced diameter pic.
  3. Rocket
    Pics in this thread http://www.venturerider.org/forum/showthread.php?t=6916&highlight=dipstick
  4. Rocket
    Take a look in the guts of it... I had one that did that, the lock cylinder was loose in the housing & I put a shim (very thin washer) beween the housing & the cylinder retention clip, to tighten things up. I also cleaned & lubed the slide, reassembled & it works. It is also possible that the protrusion on the cylinder, that engages the slide is broken off. But you won't know until, you check it out.
  5. Rocket
    It is simpler than that, splice the wire by the spade connector at the temp switch (switch connects ground when hot enough) behind the right fairing. Connect the wire added to a switch & ground to other side of new switch, then it can be turned on at will, by flipping the switch, or let it operate normally.
  6. Rocket

    Hey squid

    Rocket replied to BIG TOM's topic in Watering Hole

    You could also model them, at Don's Maint Day.......... Look at all the torment, you could cause by that.......... :rotfl:
  7. Rocket
    If it's the front upper mounting points, install these as replacements.... A great cheap fix.... http://www.venturerider.org/forum/showthread.php?t=8181&highlight=ball+studs
  8. Rocket

    Name change

    Rocket replied to Wrongway's topic in Watering Hole

    Because, Allan also possibly gets lost between the fridge & the tv set. Maybe that is, just CRS setting in........ It's a wonder he managed to find his way to & from the motel room and rally HQ, in Kitchener last year (maybe he had someone to guide him). :rotf: From what I have read so far, this new name is very fitting for him........
  9. Rocket
    An alternative, is to start with a 5 pin right angle MIDI cable from a music store, for the basis of making 2 patch cables. I wonder, where J & M get their right angle plugs from, as they are not molded into the interface cables.
  10. Rocket
    Sure looks like it, seems very accurate.....
  11. Rocket
    I refer to him, as the 3 headed Mutt..........
  12. Rocket
    You starting this thread, may have caused the profile hits & your friends reactions....... I will have to continue, to keep updated on this thread........ :rotfl: Isn't he paranoid already, looks like it.......... Must be a result of PMS & no riding therapy..... :snow::snow:
  13. Rocket
    Thanks for letting us know, about this increase.
  14. Rocket
    Well, there is always Neckbones as a fall back, as I heard you mention that one, last year at rally HQ.
  15. Rocket
    Not sure which ones, but EBC makes replacements for the rotor discs & last I looked they were in the $135. range, at Dennis Kirk. They also had a fitment cross reference for the part #s too.
  16. Rocket
    This may be what you are looking for, can't seem to find them without the deeper housing... http://www.dragspecialties.com/fatbook/14/276/7724787?q=baron
  17. Rocket
    Sounds like the scoot caught a cold, better give it some TLC.........:snow:
  18. Rocket
    Here is the link to the brackets, pics are there too & they attach to the stock horn mounts. http://www.venturerider.org/classifieds/showproduct.php/product/1371/cat/6
  19. Rocket
    I don't think Russ, goes anywhere without it........... He also trailers the scoot too, now if his scoot gets ridden (by him) during a meet, that is debatable.......... :stirthepot: You staying out of trouble, isn't that a first.........
  20. Rocket
    This will be a winter project type item. Unless someone discovers a way to do it, without pulling the motor & splitting the cases.
  21. Rocket
    I like the bit of going from pic to pic in the posts.............:thumbsup2: PS: The post count is showing again, in the posts. Don't know if you want to hide it again, or just leave it?????
  22. Rocket
    You trying to catch up to, or pass Condor, for number of scoots?????????????
  23. Rocket
    Just don't want to see CDN beer wasted, that is considered alcohol abuse, like any other spillage.
  24. Rocket
    American beer, why waste the more potent stuff...........
  25. Rocket

    Had an Idea??

    Rocket replied to cecdoo's topic in Watering Hole

    You will probably, need to get past the pond monsters to find it........... So, how badly do you want it?????? :rotf:
×
×
  • Create New...