Jump to content

Chaharly

Supporting Member
  • Posts

    1,796
  • Joined

  • Last visited

  • Days Won

    23

Everything posted by Chaharly

  1. And I haven't tried plugging the ais yet
  2. I'll message you tonight sir
  3. Runs great at idle after thirty seconds they're all hot but the back right is just slightly less hot than the other. Its a constant pop at idle but I haven't even tried to sync them yet. Rolls on the throttle real smooth and revs up plenty quick but I'm told a bad enough sync can cause it
  4. Yeah the ride through nebraska on 80 is terribly boring! I live in northeast nebraska and we have our gems but 80 is not one of them!
  5. Sounds like they're doing a pretty thorough job. Thoughts and prayers going up to you and your family! Best of luck 'puc!
  6. Does anyone have a carb sync tool I could borrow or possibly buy? I took the carbs off the bike to do the valve adjustment and I cleaned up the carbs some too. When i got them back on and the bike running it pops out of the right pipe. When i take the little rubber boot off of the sync nipple it'll rev up momentarily but there really is no change. Took a little Brake parts cleaner and sprayeed it in the hole and she smoked a little but never idled up or down. I dont trust any of the shops in my town and I know i need the carbs synced. I'm just hoping it'll take care of the problem
  7. I saw this on facebook! I'm pretty sure he had the red key in, not the black one
  8. You should add me on Xbox live CJ AKA CHIEF
  9. Chaharly came from Charles and Harley. I've always ridden on the back of Dad's goldwings with his biker buddies and they always had a group that would call me chaharly. Even as a little squirt 6 or 7 years old maybe I was a smart'n. When they'd ask me when I was gonna get my own Chaharly I would always tell them i wouldn't because I'd like to make it home without any break downs! Thats how you can tell Daddy raised me right!
  10. I dont know my dodge's very well but my Dad has a 68 Barracuda thats the same color as the one in the right. Man he loves that car
  11. Great looking picture with a great looking bike. How do you like those pillowtops. Definitely on my bucket list
  12. Tried that and TOTALLY stripped a screw. Finally figured out to throw a vice grip on it and pop it off with a screw. I'm just trying to do it one piece at a time I'm terrible with this stuff:bang head:
  13. Trying to clean the carbs but I'm stuck on step number one. It says remove the choke knob. Now I've tried twisting it off and pulling it off but I really didn't have any luck with it. Tried taking a short cut but i would really like to follow the book. Sooooo. Does anyone know how to get that knob off of there?
  14. You're right the two on the right side. Think I'm going to replace all four of both. I'm only replacing them because they are cracked all the way tthrough
  15. Hey guys! I need to replace my carb intake manifolds because they are cracked. I believe i have found the part, but im stupid with part numbers and all of that, so is this correct? 4XY-13586-01-00 YAMAHA JOINT, CARBURETOR 1
  16. Hey guys! Getting ready to do the valve job and carb clean and I see I've got cracks in my intakes. I know they don't leak and aren't known for failing but I'm thinking about putting some of that spray on rubber sealant just for good measure. You guys think this will be an effective fix or will I just be wasting my time/money?
  17. Got the sky doc clutch upgrade myself. Going to do the valve adjustment tomorrow and when I'm done with that... clutch upgrade
  18. A typewriter is one of those computers where the keyboard and the screen are separate right?! Didn't realize we had members from the stone age!!!
  19. The book says not to soak them in a caustic carb cleaner. I assume that's why they say petroleum solvent
  20. It's definitely a different bike than the V Twins. I dont know anything about the Vulcan though so I'm no help
  21. Ahh looks like a big list with a big chance for "boom"!!! I'm looking for something to clean the carbs and the book says to use a petroleum solvent. I haven't had the chance to look at any carb dips yet
  22. I did a quick search but didn't have alot of luck. Getting ready to tear into the carbs but I think I'll just soak em with gasoline
  23. Can somebody give me an example of what these are? Gasoline is considered one right?
  24. Also what is the part number for the spark plugs
×
×
  • Create New...