Search the Community
Showing results for tags 'wiring'.
-
ROYAL STAR TOUR DELUXE PASSING LAMPS I want to put the passing lamps on my 2009 RSTD. I figure I need these two part numbers: STR-4NK35-10-01 Lamps STR-1D635-40-00 Mounts I can't figure out whether I re-use the flashers that are already on the bike when putting the passing lamps and mounts on the bike. Do the mounts or passing lamps come with new flashers that replace the stock ones? I assume I will not be re-using the old stock bar. Does a new bar come with these items? The pictures on Yamaha's site don't show what is included at all. Where does the new switch mount? Where does the wiring harness hook up to? The head light? Is there any way to hook them up so they stay on with the high beams on? I cannot understand why they should go off when the high beam is on. Any help / answers / pictures would be very much appreciated. Thanks. -
Would someone scan the wiring schematic that is in the back of the owners manual and post it or email to me please. I need a 83-85 Venture Royale schematic. I have a stock 83 Venture and am going to put cruise in from a 84 venture. I have the wiring harness that I may use to replace mine. I want to look at the schematic and see if there are any differences in the connectors besides the dash hookups. I think the brake/clutch switches are different also. Thanks dingy101@live.com -
Dale bought these at the rally in one of diamondr's silent auctions.......he would need to lower his exhaust to install them and doesnt want to do that........ they are in real good shape.......they do have some dings etc on the bottom part that doesnt show....they were used when he bought them. I believe we have all the hardware and wiring etc that goes with them..... He just wants to get his money back he spent on them.....$130 plus whatever it costs to ship them to you. I believe they sell for $420 new.Here is a pic from diamond r's website of new ones http://www.diamondraccessories.com/yamaha/proddisplay.php?name=RSV/RSTD%20LED%20Saddlebag%20Light%20Bar
-
OK I can turn a wrench but I am a electrical Idiot!!!! When I install driving lights on my 85 do I need a relay?? Why and what does it do?? Where does it go?? Was planning on wiring directly to battery thru a fuse to a switch. Horns I have came with relay maybe they will help me to understand.
-
OK guys need some help here, I got my Stebel Air Horn during the week from http://www.twistedthrottle.com and I got the plug and play wiring kit to go with it figuring to make it eaiser to install. Well the connections they have are different from what I have seen here, which are, connect the black wire from the relay post 85 to the ground, so I hooked up to the battery negative. Run the red wire from the relay post 30 with the built in 30amp fuse to the positive battery terminal. Run the yellow wire, from post 87 and hook up to the positive of the air horn. Next connect the ground wire to the negative side of the horn and ground it at the mounting bolt. Install the fuse next. Next run the blue wire from post 86 to the existing horn hot wire. Ok so here's the deal got it all done tried the pink wire first and the horn was quiet and was on at time of turning key on. So tried the brown wire, and same thing. SO then tried both together and got the sound I was looking for from the horn but it still, as soon as I turned the key on the horn sounded. I'm curious as to what will happen if I take the wire on post 85 and hook that up to the pink wire and just hook the brown one up to the post at 86. Any ideas or knowledge of what will make this work with the wiring kit, or am I better off just wiring it the way Larry has it? I do like the whole connection thing they include nice wire harness to plug right into the relay, makes for a clean look and easy to unplug. Anyway, any help would be appeciated, Scott.
-
I know a lot has been posted about the Stebel Nautilus Air Horn. I took a few pictures of my installation on my RSTD and wanted to share them. Stebelhorn1.jpg shows how I mounted the relay under the right side cover next to the coolant overflow tank. Stebelhorn2.jpg shows the wiring according to the wiring diagram included with the horn package. Stebelhorn3.jpg shows the brackets I made from aluminum bar stock. Aluminum is easy to drill and bend. Not shown in the picture is the slight bend I made in each bracket to get the horn to sit back closer to the frame. I used a large adjustable wrench to hold the brackets while I hand-bent them. Bend away from you on the end that bolts to the original horn bracket, bend towards you on the other end. The brackets are hidden behind the horn so they don't have to look pretty. Stebelhorn4.jpg shows the finished project. -
I was just thrown into the 21st century on fathers day when my kids got me an MP3 player. Now I want to add a mini jack to my existing stock audio system so I can listen to the MP3 player or even plug a Garmin GPS to it. This would be on a 1st Gen an 86 VR. I have the stock wiring out of the standard maintenance manual, but has anyone spliced into the wiring to add a mini jack? and where did you connect it ? I want to be able to use the intercom and CB while listening to the MP3. I thought I read that someone gutted their cassette player and wired a MP3 player through it, but couldn't find the post as I searched through the post on MP3 players and audio. Did he wire right into the wiring? That's what I am looking to do. I don't want to upgrade the player, I have a FM modulator but too many cords and hate changing the stations when you leave or go into a different area. I think the best option would be to add a mini jack.
-
Hello all, I'm in the process of documenting the install in a PDF document but here are the final pix for the installation. Based on GeorgeS' comments and feedback from the vendor I may revise the final wiring but all of the wiring is soldered and shrink wrapped at all connectors (including the 1/8" audio connectors) and run through the stock wiring locations. Due to the fact that there is very limited space I mounted the amp under the right side of the gas tank. All of the cabling is hidden as much as possible (or at least blended) with the speakers inside the windscreen on the bars. Once mounted the system works and sounds great, I'm very happy with it so far.
-
I've recently purchased a previously-loved trailer to pull behind my 06 MV, and I fabricated and installed a receiver hitch on the bike, but I don't have the bike wired yet for the trailer lights. My question relates to the necessity of using a powered converter on my bike. Most of the websites I referenced for hitches and trailers, make mention of the fact that many modern bikes use either computerized switching or control of the light wiring, and they say as well that the wiring is too light a gauge to handle the extra amperage load of additional trailer wiring if simply piggy-backed or spliced in. Can anyone verify the existence of computerized switching for the light wiring on these bikes, and has anyone had any difficulties with the gauge of the wiring being too delicate? I simply can't seem to find any verification of either of these items in reference to these bikes, but if it's true... I want to install it properly. I just have no desire to spend money on kits that aren't necessary. I have the wiring diagrams required to tie in the circuits, so I don't need that info. Thanks for any info
-
Wife got me the Tri-Star XP brake light conversion. Over the years, I have done my share of wiring in radios, speakers, and accessories in vehicles. I have rewired trailers and such, so I am not "scared" to tackle this, but it looks a little involved. 1. Am I going to need addtional wiring? Does not look like there is enough included. 2. Is the load equalizer needed on an RSV? -
Hi, maybe someone has an anser for me. I have an 84 venture that will not start!!! I repace the tci and it ran, I had to work on the carbs--- ok did get running, but I went to start it to finish setting the carbs and...... at one time it was like the 4 of july. Here's the stange thing I have 12 volts going in to the tci red wire just like should, but I start cranking and the voltage goes down to 3.68 volts on the red power line-powering the tci!!! I have checked all the ohm reading and they are ok, all the relays are working. I follow the diagram and it shows red line 12 volt all the way to the tci, I know the wiring route on the bike is noware near the drawing on the paper(I found that the stater wiring goes thourgh the turn signal relays and other things). I just can't get 12 volt's at the red power ine. Has anyone else had anything like this show up. Thanks any help would be appericated. tom
-
Was wondering about people's experiences with routing the wire from the trunk to under the seat? Just had the dealer wire mine. The mechanic ran the wire over the inside top of the trunk came out the back of the top of the trunk behind the passenger backrest (drilled hole), dropped down under the passenger seat and then connected into the wiring under the seat. So, you can actually see the wire running from behind the passenger backrest to under the passenger seat (3-4" worth). It works, and I can secure the wire so it aligns with one of the seams, but IMO, it doesn't look all that great. Also, seems likely to have problems... with the lid going up/down, the wires are going to rub/flex with every opening (although, they are wrapped in electrical tape). I was thinking it may have been better to come out the bottom of the trunk, leaving enough loose wire to allow for the trunk opening/closing. Was wondering what others have done that may be better, or should I just live with it? It does add a lot of light on the back end, which is always good. Also, if anyone is intersted, the Raven color blends very well on my 07 Blue/Black RSV (you can't buy a blue light/spoiler). As always, thanks in advance for your thoughts. Bob -
Here's the progress on the wiring as of right now. I've just got 1 more connector to replace then wire in the new and improved wiring harness, plus tie some grounds and brown leads together. Unfortunately I'm running out of chrome wire loom so that part won't get done. Our local Pep Boys is out of stock but there is a website from the manufacturer, www.spectreperformance.com so I will order from them...
-
Hi, I can not find the answer on any of the threads. I have purchased the Stebel Nautilus compact horn and an Amanet preassembled wiring kit. I installed the wiring kit as described but when I power the bike the horn starts sounding immediately. Somehow the wiring is not correct. The description says that I should connect one wire from the set to the power wire of the old horn. There are two wires connected to the old horn, a red one and a brown one, and when I connect the wire set to either one the result is the same. What am I doing wrong? Is there anyone out there who purchased the Amanet Plug and Play wiring harnes modell SNPNP successfully? Thanks, Robert:crying:
-
07 venture...6900 miles. purchased new.........i'm getting no spark at the left rear cylinder...plug checks good....other three are firing.........new battery........i really can't make heads or tails of the wiring diagram......is there any fuse anywhere that would affect just one plug?
-
I need some wiring help. I purchased the 1 - 253-4400 Red Ultra Light Bar w/ Turn Signals - US 15" Ultra Light Bar w/ Turn Signals - but I can't seem to get the wiring right - and I have misplaced the packaging. I know the Venture wiring is: Green - right Brown- left Blue- running Yellow - brake Black - gound The light bar has only 4 wires and not sure how to connect? I have the left and right and running working - but cant get the brake light to work? The light bar wiring is (I think?): green - right yellow- left brown running white - ground So where is the brake light? Can anyone assist? Appreciate your help. BBIRINill
-
Hi, Thanks for all the interest in the 83 parts I have listed in the classifieds.Floorboards, clutch master cylinder, throttle cable, rotor covers, slave cylinder, seat, windshield and left saddlebag are gone. Still willing to offer good deals on driver's backrest, nice chrome bumper, TCI, Full Wiring harness and many other parts. Radio/CD were shot.. Help me clean out my basement/ garage. I'm tired of parts everywhere Clay
-
I am trying to install a Yamaha CB on an 83 Venture Royale. I have the CB and the wire that goes to the amp, but I need the wiring to plug into the CB to battery. I also need the wiring to install the radio controller. I have the controller. I also need the mic. Can anyone direct me to someone who might have these missing parts for installing the CB? I can't find them on EBay. Thank you. Mixon
-
So just purchased a new Aluma MCT and was wondering if anyone could could tell me where to get a swivell hitch to fit it. I,ll need to get a spare, which I can do locally but not sure where to get the swivell hitch and wiring harness. Any help would be appreciated.
-
Found some kickass Billet LED frames that fit our bikes! LEDs are very bright and all the wiring is inside the frame. No wiring mess on back of frame. Check it out: http://lh5.ggpht.com/arizonakober/SAJYMEwm7lI/AAAAAAAAEQ8/cTkI9VwyluU/s400/Billetboysonayamaha.jpg http://lh3.ggpht.com/arizonakober/SAJYMkwm7mI/AAAAAAAAERI/JuOTd_Ha420/s400/Billetboysonayamaha2.jpg
-
I have the 4 Way Flashers on my 06 Venture and would like to know the electrical load limit on this set-up. A LEO friend of mine gave me 4 mini-amber strobes and I'd like to tie these into the 4 Way Flasher wiring. The mini-strobes pull .5 amps each for a total of 2 amps. If I can do this I won't have to install a separate switch just for the mini-strobes.
-
I'm doing a little preventative maintenance on my 07RSV. Found missing screw on trunk lid slider but screw was in trunk. Tightened others. Aslo putting on light bar for brake lights from Signal Dynamics. Found out need to have 1" spacers. My main question is do you loose any memory (not mine, the radio or computer) by disconnecting the wiring connectors under the front cowl to install the dielectric grease? Also should I disconnect the battery first? Thought I'd better get this stuff done before it's too late. Thanks for any replies.
-
Does anyone here have a wiring diagram for the Harbor Freight air horns? I bought the set about a year ago and never put them on. Went to put them on my p/u and all I could find are the 2 horns and the air compressor. Nada on wires, wiring diagram or relay and switch. If anyone has one it sure would be appreciated.:bang head: Don H.
-
Can anyone send me a copy of the wiring diagram for the headlight (low/high switch feed) I have lent or lost my service manual. It's heck when you get old! Thanks in advance. Oh, just in case....it is for a second generation Venture
-
:confused07:I have a Piggy Backer trailer. I used the Modulite modual wiring kit in order to use the 4 pin wiring kits. My problem (on the trailer) is this, my brake lights and running lights work like they are supposed to. The turn signals work right also, BUT when I have the turn signal on and hit the brakes, the turn signal stops flashing. The turn signals, front and back, work properly on the bike. What did I do wrong with the wiring?
