Search the Community
Showing results for tags 'input'.
-
I am sure this has been talked about but would love to have some input...I need to replace my Brake pads on my 06 Midnight venture. There is so many diffent pads out there so would like some input on type and good places to buy them from.
-
Since I started looking for new lids, I have come across Carbon Fiber HJC with both DOT/Snell approvals. They fit well, just looking for any other input related to the Carbon material? Any issues on this rather new material for helmet use? Very light weight is a benefit, Cost is the down side. As always, appreciate the input for the riders here on the site. Thanks,
-
Thinking about Metzlers for my TD. Any size suggestions? I wanted to go with a bigger rear tire, but i'm not sure if it is wise. Any input is welcomed.
-
In june I am planning to ride north on US 41 to the Terre Haute area, then possibly take US 40 east to US 231 and head south to Owensboro, Ky. I have a few days available for this trip. I have heard riding this part of Indiana is a good ride. I would appreciate any input as to places that are must see, places to eat, roads to ride, etc. Also, anything to avoid such as traffic, construction, etc. Thanks. Bill
-
Just curious what you all might suggest for Hwy pegs for my RSTD. I have looked at several different brands but thought I would get input before purchasing. So, what do you all think Thanks
-
if i find some 32mm carbs in good shape sometime in the future, i was wandering how easily or difficult it is to adapt these to a 1996 rsstd? what other parts would i need to purchase or look for used, and what other tech tips will i need to know? any and all input will be appreciated. i know that this enhancement is supposed to make a major difference, and if i keep the bike, which i probably will, i will try to do this task. thanks, Mark. -
I am about to replace the clutch on my 83VR. Wondering if I could get some input on what type or brand I should be looking at.
-
After much to-do, I finally settled on a Garmin C580. Got a good deal ( I think) at ~$183 new in the box..not refurbed. I just couldn't bring myself to pay 2-3 times that for a Zumo. (or any of the other m/c specific units) Bought the appropriate RAM mount components to swap the unit back & forth between bikes and over to the truck on occasion. I still have to add aux power outlets to both bikes for the pwr plug (It's got some integral gizmo for MSNdirect). OK....yada, yada, yada....bluetooth...blah, blah, blah and so on! Now, to the point! The C580 (not being a motorcycle friendly unit) has a pop-on, pop-off ball-socket on the back, that I wouldn't want to trust to resist a sharp bump in the road and not be rolling down the road after me at 60mph or so. I recall seeing some GPS post recommending tethering GPS units to avoid such an incident as I described above. The question is ....HOW? So, here I am.....asking for opinions or recommendations/ideas as to tethering solutions. I have a couple of ideas, but I'd like you folks input before I decide what I'm going to do. How'd you do yours (if you did), or maybe one you saw that was neat or whatever!!! Thanks for any input!!!!
-
Has anyone here used any of the tour companies like Eidelweiss when riding in Europe? I think I want to plan a tour of the Alps and theyseem like the way to go. Any input will help. Thanks
-
I am a new 1st gen owner (1990). Love the bike, but have been shopping for some accesories on ebay. what is the best way for me to tell if parts from other 1st gen years, will fit my bike. Am looking specifically at drivers back rests. thanks to all for input! any one do bikers for babies in STL, MO? thinking of doing it this year.
-
This is a puppy my son found. We are trying to figure out what he is...we are thinking German Shepherd...any other ideas? Appreciate your input. We will find out for sure in the next day or so when we take him to the vet.
-
I was curious of others thoughts. I used to change tires on my old HD and never balanced them.Now that I am getting ready to changes the tires on my TD I question to balance or not to balance. I know there has to be a few of you hear with opinions or suggestions. As always thanks in advance for your input. JOHN
-
I'm wondering if anyone could help. New member as of last week and not really computer savy. I need to buy a pair of clear glasses for riding home later than we should. We always seem to ride too late and my eyesight isn't the best, when it's dusk. I would like a pair that the wind can't get through the sides. Appreciate any input, otherwise I'm going to have to start riding with the hubby and I'd just as soon keep driving my own bike. Thanks!
-
Ok folks, I ran into what I feel are the ultimate wiring diagrams for bikes. Please go to www.kojaycat.com and do some reading. Currently they do not offer diagrams for Ventures. However Colin would be interested in working with us to make them for all needed Venture series. I need to see what the the club input is on this idea. I figure about $30 to $40 per set U.S. Might be less. The 1500 Wing set is right in that range. We have a sister club in the U.K. that would probably be interested. I will send them the same message. We might need to help with pictures of components etc. JB
-
Is there a web site to check what warrenty you have left on my RSV. Thanks for any input, Joe
-
Hi everyone, new guy here. I'm VERRRYYYY interested in buying an 07 or 08 RSV. My question to you is.... After owning one and knowing what you know now about the bike (problems,reliability,qualitiy,etc...) would you do it again?? If you would/woud'nt...why/why not? I'd really like to know of any inherent problems before jumping in w/both feet (and a bunch of money) Thanks for your input everyone.
-
My high beam does not seem give me any more light then my low. I am running driving lights as well. Is there an upgrade bulb or front head light I can go to. Thanks for the input
-
I plan on purchasing a set of headsets this year....I use a half helmet. Which headset seems to be the best quality and reliable? Thanks for your input. randy
-
I was thinking of getting a trailer to store my 85 VR in and trailer it down to Morro Bay ca this summer. Has anyone had any experience with the continental Cargo enclosed trailer? I was looking at the 6 ft by 10 ft model with the extra 6 inches of height. and a guy is town has one about a year old for about 2500 cdn I think these were about 4000 new around here. Is anyone aware of any issues with these trailers? Thanks for any input anyone may have, Brian :cool10:
-
Can anyone help me find left & right rear view mirrors for 1991 Venture Royal-any input would be appreciated
-
Hey just looking for input on where to camp near Bryson City or Cherokee NC. Thanks for any input or suggestions. Was looking at Ela Campground but haven't found any feedback about them.
-
Ok, I talked to Bill Morphy who builds the Mic-mutes. He says I have microphonics!!!! This is not life threatning , nor will I need antibiotics. But I'm P.O.'d nonetheless. This is a follow up thread to the mic-mute one I did a couple days ago. I did a test in the garage. Turn the key to accessory, leave motor off, turned on the stereo, turned down the sound of the music audio to zero. Turned the IC up to 20 with helmet plugged in and then toggled the PTT. The mic would mute but there was still a ton of white noise (background noise, static, whatever you want to call it) Would those of you with mic-mutes try this test and tell me if you have this same noise. I'm about ready to get ahold of Yamaha mothership if my case is unique and ask about warranty replacement. Your help with this test would be greatly appreciated. Look forward to your input. P.S. if your interested......look up "microphonics" under google or more bike specific to a "goldwing microphonics" search. Thanks for your input. Jim
-
I'm getting ready to build a trailor to pull behind my bike.Any input on tongue lenght,any PICS. of trailors would help............THANKS DENNY:bighug:
-
I'm planning next year's vacation, and my wife wants to go to NS & PEI. when is the best time to go? Best places to stay? Best roads?Any and all input is great!
-
Can anyone out there tell me more about Levelling links. Are they useful, do they make the bike more stable, easier to handle at low speeds? Please let me know, thanks in advanve for your input. Joopster
.thumb.JPG.6aa03b8134f366ff62e90df4795a3dcc.JPG)
.thumb.jpg.ce61bc94739efc1059157f86c7216f78.jpg)
.thumb.jpg.86b14ff76d3485995b1240269d027bfc.jpg)
