Search the Community
Showing results for tags 'appreciated'.
-
Any body running a car tire on a 1st gen. I have been kicking the idea around but as of yet havent been able to find anything in my tire size. Any help wopuld be appreciated. thanks in advance David
-
Hi guys, what's the shortest CB antenna I can mount on my RSV? I know I may be sacrificing a lot of range by going shorter but I seldom use CB but don't want to give up the capability. I currently have the 36" Firestiks and mods on both sides but soon going to try out the hidden amplified am/fm antenna on the bike.. if it works that well, then I would want to reduce the CB antenna to balance out the look of the bike without losing the CB antenna completely.. Part number, where to purchase etc etc.. would be appreciated.. Cheers
-
Now that I have been adding accesories to my 07 RSTD, the battery post are clogged with wires I attached. Is there a better way? Perhaps some kind of terminal block I could install. As always, you suggestions/recommendations would be greatly appreciated. Thanks Mark:bowdown:
-
Others have said it so well. The club and the forum and MD are all just plain special and I want to add my own personal thanks to Don and Eileen for all the obvious work to make MD so uniquely special. It is great to get to continue to meet members, especially at an event such as this. Also want to say that all the help from so many for my tire change job was enormously appreciated. Here are a few more pictures of this great event, starting with our rendezvous at bongobob's.
-
Thinking about a new Jacket. Was just eyballing " on line " the TourMaster, Transition Series 2 Jacket. Anybody out there useing one of these ?? Any comments as to quality etc. etc. most appreciated. Thanks
-
A question for the Canucks on here what bike jack do you have. I see Canadian Tire has one are they any good? Any help appreciated! Ken!
-
A question for the Canucks on here what bike jack do you use! I see Canadian Tire has one does it work okay? Any help would be appreciated! Ken!
-
HELP>I need a set of mufflers for my 86.Any help will be appreciated.
-
I need to check the valves on my 2008 Venture. Does anyone know where I can find the tool that hold the bucket down to change the shims? Any help will be appreciated.
-
I know we all do our share for charities on here and poker runs etc... but the misses Tinystar is on the committee for raising stock at the Iowa food bank. She's asked me to mention it here to see if we can get any donations for the auction. If you have a hobby like making bird houses, knick knacks, embroidery or anything along those lines it would be greatly appreciated. You can contact me here or my wife or give me a call. Whatever is donated is tax deductable and a receipt can be sent if desired. Thanks for reading and God Bless. Ride safe. Mike
-
hi I'm new here I have a 1986 venture Royale. I need to replace the diaphragms, any help on how to go about doing it would be appreciated. Thanx .
-
My sister (Lilsis on here) is looking at a '97 Royal Star Tour Classic with 17k on it. What should I look at aside from the obvious stuff? Any thoughts would be appreciated. -
I have a 2006 RSV. I was out on the road over the weekend and my cruise control was out of control. When I would engage the cruise control it would start accelerating at a rapid speed all on its own. Any suggestions or help would be greatly appreciated!
-
Need some help here. I am ordering some fork seals and want to make sure of the model #. I can't find anything on motor and the ownership says "XVS" !! I am prity sure they mean Z not S. Anyway how can I tell between a "N" "TK" or what ever it could be. Or, does it mater at all since all 1985 XVZ12 Ventures are mostly the same. Your help is appreciated!
-
Looking for some new speakers for my 2006 RSV. Anyone suggestions for new speakers would be appreciated.
-
I have an '89 VR and I've seen many posts telling me to move the TCI from it's mounted location to the top of the air filter box. Well, I've spent the last three days working on this and other mods to come to the conclusion that the TCI won't let the faux cover fit. It's being held off by at least a half inch. I'm wondering if I should cut the TCI mounting tabs off to provide a little more clearance. Any help would be appreciated.
-
I understand "E" bay lists a vendor for plug wires for the venture royal. Any info. available will be appreciated. Thanks one and all. papaw Len.
-
I am new here. I have a 2003 Venture it hesitates in the mid and uppers ranges. It also bogs down bad then all of a sudden takes off. Any help you can give will be appreciated. Thank you -
Well here goes,This is my first attempt at this. I,ve got a 99RSV 27,000 miles my c/c will come on and give you all three lights but after that the on light stays on but will not even attempt to come on or set. Is there another fuse or could one of my brake or clutch or rear brake switch be bad how could i check it? Any help or info would be super appreciated Thanks
-
Hi to all, Just had my rear tire replaced and something does not look right. I remember seeing a nut and lock ring on the right swing arm, can't be sure but not feeling safe riding. Any help would be appreciated. Screaming red
-
What do I need to get to have my rear turn signals to light up when I brake. Any assistance will be appreciated.
-
Peg Lowers for 1987 Yamaha XVZ13DTC VENTURE
Guest posted a topic in Venture and Venture Royale Tech Talk ('83 - '93)
Looking at a '87 Venture Royale XVZ13DTC. Need brake and clutch pedal lowers to get it to fit. Need to move the pegs down and forward. Any suggestions? Resources? I'm new here, any help appreciated. NOTE: I did own a '99 RSV, and do own a '03 RSV with sidecar. The '87 would be added, and replace a Road Star 1700. Thanks again. -
Hello everyone: This is my first post and I am sure that I am not doing this correctly so please bear with me. My basic question is this. Is there a good quality horn replacement out there, that does not require rewiring and will basically fit into the stock placements. My horn on the right side does not work and I would like to replace it but I do not want to deal with wiring and similar issues right now. Any help would be appreciated. - Thanks MM
-
can anyone tell me if the needle valves from an 85 will work on my 86? i found a good deal on 2 but not sure if they will work. any help would be greatly appreciated. thank's bill:puzzled:
-
I just installed J&M communication system in my & wife's helmet. I can't figure out how to get intercom to work. Everything else seems to work including CB. Any help would be appreciated. Thanks.
.thumb.jpg.bea94b2fb3a7dc72d417d9ffb4f4fc28.jpg)
