Jump to content

DwightGA

Expired Membership
 View Profile  See their activity

  • Posts

    31

  • Joined

  • Last visited

 Content Type 

Everything posted by DwightGA

  1. DwightGA
    Thanks for your input. That sounds like a good plan so that is what I will do!!!
  2. DwightGA
    Hope someone can help. I am relativity stupid when it comes to electrical issues, so I hope someone can help me on how to install a Kuryakyn LED Battery Gauge on my RSV. My Daughter gave it to me for my Bday so I already have it and not in the market to buy a better one. I plan on installing it over the Yamaha emblem on the front trees. It came with 18" of wire so I was hoping to find a location close and easy to reach. Thanks
  3. DwightGA

    Cartoon Fun

    DwightGA replied to MikeM's topic in Picture Folder

    I had to try it also
  4. DwightGA
    I made a glove box out of my cassette play a month ago. Radio works the same as it always did with no extra fusing around. All I can suggest is the antenna is not fully connected. If it worked before the modification it should work now. But with trying to get the cassette player out past all the wires something must of come loose
  5. DwightGA
    The best way I have every used is paint remover for removing oil. Just pour on the stain, let set for a few minutes, brush in and rinse off. You will be amazed.
  6. DwightGA
    The Scratches were small but deep into the left side of the fairing when you are sitting on the bike. The eyebrows covered it so well there is no sign of any damage. I think it is a good fix and looks good. Just my opinion but I am interested what you all think ?????? Dwight
  7. DwightGA
    Trying again with the photos
  8. DwightGA
    Wrechrob sent me the set of eyebrows that I was looking for. The reason i needed a another set was I had a slight accident when I dropped the bike at an intersection, on some loose sand. It started to fall and I could not stop it. I put a couple of scratched on the fairing. I used the extra eyebrows to cover them up. I think it turned out great Let me know what you think? Dwight
  9. DwightGA
    Wrenchrob is sending me a set but Caveman said he has a set. Dwight
  10. DwightGA
    Hi All I converted the cassette deck to a storage area this afternoon. It worked out quite nicely which I plan to keep my Ipod and garage door opener in. I followed the the instructions from the following link to ventures.org. http://www.venturers.org/Tech_Library/index.php?action=article&cat_id=002003&id=386 I attached some photos after the project. Dwight
  11. DwightGA
    wrenchrob I would gladly pay postage and something for you effort. I really appreciated your response. I can email you my address information Dwight
  12. DwightGA
    I am looking for a set of Eyebrows on the Fairing. If anybody has a spare set they would like to sell please let me know. Dwight
  13. DwightGA
    I know that safety chains are required by law. But does it have to be a chain or can it be nylon straps? With the hitch that I have there is no good place to attach the chain. These straps are just as strong as chains and won't scratch up my bike or hitch. Does anyone know what the chain or strap requirements would be to be legal and properly preform the function the laws is intending to solve? A motorcycle trailer is not that heavy so the chain or strap should not have to be as heavy duty as on other applications. Thanks for you input.
  14. DwightGA
    If I could do it over again I would get one of the following. I kayak when I can, and a couple Kayakers in our club have these trailers. They are very well made and the most versatile trailer I have ever seen. http://www.rackandroll.com/ http://www.sportsrig.com/ http://www.maloneautoracks.com/microsport-xt.php
  15. DwightGA
    Thanks everybody for your help. I know I should put on the LED lights but I just can't do it right now. A special thanks to Owen, I really appreciated your offer. Dwight
  16. DwightGA
    I need help with my Saddle Bag Rail Reflectors on my RSV. The reflector on the right side rail of the saddle bag broke. I have been searching for a replacement but cannot find one anywhere. Does any one have any suggestions. I have attached a photo to show what I am looking for. Any help is appreciated. Dwight
  17. DwightGA
    I have a set. I will be in Fairfax,VA. April 2, 3,& 4. If you are interested I can bring them with me so we would not have to pay for shipping. Let me know if you want to work something out. They are in great shape. Let me know if you want photos.
  18. DwightGA
    If you are thinking about getting Insurance because you have a problem. It may be to late to buy it. You can not buy insurance if your house is already burning.
  19. DwightGA
    I hate to do this but I have to sell my 2000 MM (#272) Venture. All of my Georgia and Alabama friends can vouch how nice this bike is. With the matching trailer it is a real eye turner. Other bikers and cage drivers are always complimenting on how nice it looks and wondering what kind of bike it is. Pictures are worth a 1,000 words but some points to remember: • Always garage kept • Always under custom fit cover (included) • Never been down • Corbin Seat (What a great seat) • Wheel Chock included (great for parking bike) • Chrome Battery Cover (I also have the original painted ones) • Chrome Air Cleaner Covers • Passing Lights • Yamaha Air Wings (what a difference they make) • Bulb exhaust (I also have the original exhaust pipes) • Only 35,000 miles • Good Tires • Plus other extra features too numerous to mention This bike is one of a kind (OK 1 of 1,500) so the question is what do you think it is worth? Is anyone here interested or know of someone who might be? Your help is appreciated. The bike is located just south of Atlanta in Pine Mountain, GA.
  20. DwightGA
    This is not your typical tent but they are very light weight and very comfortable. http://hennessyhammock.com/
  21. DwightGA
    Thanks for everyone’s help. I took the fairing apart to replace the fuse that was connected to the switch. Cost me $1.00 for the fuse and a couple hours of time, but now I know how to get the fairing apart so the next time will be a lot faster. I could not of done it without you-all. Thanks
  22. DwightGA
    I need some help. When I got my previously owned Venture, the passing lights were already installed and were setup to be on all time. Here is the problem: they quit working and I do not know how to fix them. Electrical is not my strong point! • Do they have a separate fuse (if so I could not find one) • What are they wire to? • Do I have to take the front cowl apart? Any help is appreciated,[/size]
  23. DwightGA
    I used lights for my trailer from Peterson Manufacturing. Check out this link http://www.pmlights.com/products.cfm?cId=1&fId=57
  24. DwightGA
    Check out my photo gallery. I can't imagine anything looking better than tan.
  25. DwightGA
    If I could do it over again I would get one of the following. I kayak when I can, and a couple Kayakers in our club have these trailers. They are very well made and the most versatile trailer I have ever seen. http://www.rackandroll.com/ http://www.sportsrig.com/
×
×
  • Create New...