JMC
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Everything posted by JMC
-
Not here either. Thanks for all the time you put in to make this site great.
-
Welcome The rear shock is a problem works shock a 600. fix. I looked for a list of problems someone has put together its here somewhere. This is a great site for inf. and you will find a lot of great people willing to help. JMC Eck found it while I was looking.
-
My wife and I rode to the park Sat. afternoon I wish we had taken a camera. I talked to a few after their test ride but did not have a desire to ride. We enjoyed looking at all the bikes, the paint jobs were very nice. Sorry no pictures. JMC
-
Glad to hear you made it home, it was nice to meet you and spend time riding and making new FRIENDS / depending on the picture Donna promised not to post. mike
-
"Also, I had no control and felt like I was going to fall off the entire short (2 mile ) trip," says Bill. ENTIRE LONG (2 mile ) trip. says mike (JMC)
-
Had carb sync at meet & eat I have run two tanks of gas 40.2 & 39.3 two up. I was geting 35,36 mpg at best. I thought bike was running good before sync but much more efficeint now thanks to Slick97spirit and and Eck . jmc
-
Thanks again for having us to your house,my first meet & eat had a great time. My bike is running great thanks to slick97spirit have not cheaked gas milage yet . Mike & Jen
-
Just got in from my 1st meet & eat B2Mom B2Dad had a great meal thanks for a great day. It was good to see some of the faces from this site. Slick97spirit and Eck synced my carbs made it all the way home. Thanks again JMC
-
My dash lights were out on 99 there is a post here somewhere telling how to put led lights to repair not a fun job. They stick to the back of glass I then put a thin strip of black tape on outside of glass to hide the strips. The post said to paint glass. Tape has worked well for me. jmc
-
Back on the road doubled up springs before church this morning works great . I tore gasket in one place but not leaking. Thanks again a great site because of people like Earl. Hope everyone has a great Easter sunshine and 55 degrees high of 78 today in Western KY. Hope to ride after church. JMC
-
Earl what are the chances of saving the gasket I spray painted before install? JMC
-
Owen did you get the cover off and back on with the same gasket. I spray painted my gasket before install I think it will stick on removal. I recieved your pm but could not get my answer to submit. Glad to hear their is a fix. JMC
-
Earl I installed mine today when I loged on I saw Owen was having the same problem. Thanks for the help I thought I did it correct. I will be needing a new spring sorry for the trouble I hope your supplier will take care of this for you . JMC
-
I also installed my kit today and have a soft pull on clutch lever. Slipping in all gears. I am no mechanic but all seemed to go as shown. JMC
-
Second Gen. (and First Gen.) Clutch Spring Kit Shipping!
JMC replied to skydoc_17's topic in Watering Hole
Thanks for getting this kit together and don,t worry about shipping time on my order. JMC -
Thanks for getting these together just ordered one kit. 2nd gen . Thanks for the comment about the install with one hand behind the back just what i needed more pressure. Great price
-
I rode to Dublin to Amish community to a tack shop 15 mile one way,out for milkshakes when wife got home from work. Today have a ride to Garden of The Gods in ILL. with KYrider and a group from church hope weather permits leaving 8:00. If any of you have heard of Kevin Skinner Dublin is the small community in KY where he lives.
-
Orered new E3 put old tire back on for now. I sure wish it had worked for me. Thanks for all the great info. may try again someday.
-
Came in from work and started working with tire again got one side to seat using wd-40 80 psi . second side not so good blew the bead apart and scared me just a little. Bike down till I get another tire. Dont know what I will buy this time, 10,000 on Avon rode great, thought I would try a federal for better mileage. Nothing hurt but my feelings.
-
Tried everything but the fire bomb no luck. Can only get 80 psi from my compressor. It will hold air but bead is not seating all the way to the outside of rim. Will try again tomorrow after work may need more psi. Just does not want to seat straight on either side. Thanks for all the suggestions. Not giving up yet.
-
Just wiped off with rag not with a wire brush will go try, I have spent more time trying to set bead than taking off and mounting tire. Thanks
-
Left it outside while taking rear tire off. It is taking air but will not seat all the way around on either side.
-
Need info. on how to seat bead . Used dish washing liquid and 80 lb psi no luck . jmc
-
Looks like a great day of riding. I missed getting to ride up with KYrider, wife had to work. Would you tell them I have already seen pictures, he won't have to tell me a thing about the ride. You all have a nice day tomorrow and a safe trip home. Tell Bill and Marilyn HI from Sedalia .
-
Just replaced mine on 99 with 57000 miles. Rode down the road a few miles handles much better . Will try to get a ride in today and see if it needs any adjustment. Bought from Buckeye Performance great service . jmc