firewalker
-
Posts
62 -
Joined
-
Last visited
-
Just had the control module on the handle bars replaced for pretty much the same situation. Here are the symptums I had, when I would first crank the bike, everything was great and all would work just fine, but after I would start riding the buttons stopped working, if I would stop and turn off the bike then recrank after a minute or so everything worked again until I would start riding. Took the bike to the dealer and explained the issue, they looked it over and replaced the control unit under warranty, I had this done while I waited once they got the part yesterday and on the way home last night I tested the buttons at different speeds and it all worked. Mine started with just having this issue with both radio and CB going, but the past couple of weeks I have not turned the CB on and was still having the issue.
-
Actually talking to the Owner of my local Yamaha dealership, the problem is not with sales, the issues come from the fact that it is very hard for the dealers in this market to get a person financed on what is considered a Luxury Item. He told me that they are extremely busy with the people that want to buy, but when they try to get the financing that is when the sales are falling through.
-
mounting a gps?
firewalker replied to Goofeychuck's topic in Royal Star Venture Tech Talk ('99 - '13)
Check out http://www.gpscity.com I got my new Garmin and mount from them and it was the best pricing and fastest shipping that I have used for these items. -
Hey Dave77459, not sure what side of Houston you are on but the dealer in Highlands (about 25 miles east of Houston) Tejas Motorsports ae a little better than most in the area, very knowledgeable and friendly group. They perform all of my service and I have never had an issue with them, some of their sales people are new and young and more geared towards the sprt bikes but I am getting them up to speed on the Venture when I can.
-
still looking for parts...
firewalker replied to Moose's topic in Royal Star Venture Tech Talk ('99 - '13)
try http://bikebandit.com I use them when I need to by new parts for the bikes that I pick up and repair -
I personally use the IMC headset for use with a half helmet, it is a stand alone product that wraps behind the head. You can look at and order here http://www.sierra-mc.com/proddetail.asp?prod=IMC-HS-G45U
-
I would like to invite each of you to my local dealers bike night, this is always a good time. Every couple of months they put on this event and it has gotten bigger and better each time. We are about 30 miles East of Houston Texas and the event will be held Feb.28 from 4-8 pm, I am posting the link to the information on their webpage. http://www.tejasmotorsports.com/event_detail.asp?event=348086
-
you can also download a working copy of Avast from http://www.avast.com and install, then make sure you run the updates then perform the bootup scan this will also help...have used it a few times even at work during small outbreaks to get rid of infections....I can speak from experience as a network manager that Avast has detected things that even our more expensive purchased programs running all the time on the machines have not found..
-
Here is the 30 miles east of Houston we were hit with 5+ inches of snow on the ground over the course of a couple of hours, I have been in this area for 31 years and have never seen snow down here that heavy.
-
Greetings from Texas (30 Miles East of Houston), we were hit very hard, I am having to come to my office to get internet, A\C, water or pretty much anything that requires power since I have none at the house..lost power at 12:10am on Saturday and have not had it since, bad thing is I have a water well and without power I have no water....I did manage to get a generater that will power the well just need to wire it up, that will be a task for tomorrow....Just wanted to post that I for one am fine and the house and More importantly the RSV are fine....am even going to try to make a ride out Saturday to the Bikers and Boxcars rally in Rusk Texas...if anyone hears from others in Texas please post want to make sure they are all OK and if they are in the area and need anything I am willing to give any help that I can....my cell is 713-204-0673 and email (which comes to my cell) tail_gunner@comcast.net
-
Had to replace the left on mine, really was not that bad of a job, i did not take any pics but it only took about 30 minutes to do....also found that on the new guard the metal tabs that mount it to the bike were much thicker than the original by almost an 1/8 inch.
-
I will be there....can't miss one so close..rode to Tennessee for last years and had a good time til my cabin flooded.
-
the only head set I have seen that does not require you to wear the liner in a half helmet has been the ones from IMC, I have been using these for a couple of years now without any issues, I would suggest using Sierra Electronics to purchase as they have been a little cheaper than even the manufacturer on the ones I have picked up, they also sell other brands too. http://www.sierra-mc.com/
-
I rip all of mine at a variable bit rate setting that way you still get good quality but it does not take up as much space....I did all 400+ of my CDs, used 2 CD drives in my computer and still took a week or so, luckily I was on Christmas Break and had the time....averages around 100MB or less per CD.
-
My local dealer is hosting a Bike Night on Saturday May31, 2008 from 6-8pm..I wanted to invite anyone here that lives in the Houston Area to come out and join in the fun. There will be food, a live band, prizes, and a bike show. The dealer is Tejasmotorsports in Highlands Texas, http://www.tejasmotorsports.com 347 S. Main Highlands Texas 77562.