Search the Community
Showing results for tags 'service'.
-
Ok, I am having a senior moment. I am about to do some service on my 86VR and cannot remember how much oil to use when doing an oil change, I am repalcing the filter also. My DEAR DEAR wife cleaned up MY garage and now I cannot find my service manual. Thanks ofr the help; DON
-
I know.. I know... this is definately not Bike related... BUT... If I soon don't get this thing fixed, I won't be riding anytime soon. Looking specifically for a free online download. Ebay sells service manual for around $200. I've seen them online but can't find the links anymore. Am having Hydraulics problems in the outriggers and need to tear apart.
-
Which cell phone and service has the best GPS and gives the best/easiest system when requesting info directions ? Cb
-
Can anyone steer me in the right direction,I need a new service manual for my 1985 Venture. It as cone missing over the winter ,and there are no signs of it. All so Iam thinking of changeing out my antifreeze with something better.Like Royal Purple,or some other product that will help keep things a little cooler. Ant suggestions would be appreciated.And last what is the total amount of antifreeze in the bike system... Thank you Stan
-
OK, so it's not Venture related, and a shot in the dark... My grandson picked up an '89 Ninja 600 basket, and I wonder if anyone here might know where I could find a downloadable service manual in PFD like we have available here for the Ventures. I tried a search, but couldn't find anything. Any help would be apreciated.
-
Greetings all A Riding buddy and I are headed for points South from Halifax Canada, down to Key West and meander inland and north for a few weeks in mid May / June. Up til 2000, as a cager, I had used Military Transient Accommodation extensively throughout the US and Europe as a way to keep traveling costs down. Facilities were always clean and very adequate. Does anyone know if Post 9/11, if the bases still allow the uses of facilities such as these, by retired Service Members?
-
We're having an issue with the 2002 Intrepid (2.7L V6) my daughter drives. Sometimes (and becoming more frequent) when accelerating from slow speed or stop there is a massive hesitation. The RPMs might rise a little bit but then acceleration stops and the tach stays steady. I can hear the intake noise from the open throttle plate but there is no power. No perceptible stumble, just no power. If the pedal is released the engine idles fine. After 15 seconds or so everything straightens out and it runs great. The service engine light seems to be non functional. The OBDII is showing five codes, four for the four oxygen sensor heater circuits and one for a multi cylinder misfire. I'm assuming the multi cylinder misfire is being set when we see the hesitation. My understanding is that the O2 heater circuits should not create a driveability issue. For those of you that have been around outboard boat motors: The engine sounds just like when you open the throttle butterflies on an outboard without pushing the linkage that works the spark advance. There is the BWAAAA of intake noise but little RPM increase and no power. I had similar behaviour with a Virago where the TCI was not advancing the timing. So I suspect the hesitation is being caused by a failing PCM not advancing the ignition timing. Of course the problem is intermittent enough there is little chance of verifying that with a timing light. Appreciate any feedback on my reasoning or alternative thoughts. Thanks.
-
I have ALWAYS worked on my own bikes. But they were Harleys and I knew them from top to bottom, easy bikes to wrench on. I just bought my Royal Star and since I have my big trip coming up here in a couple of weeks, I decided to take it to the dealer for the 16,000 mile service, just this once... The reason I have always worked on my own bikes dates back to the first time I took my first Harley into the dealer for a simple oil change. I went to pick it up and low and behold, there was a scratch on the tank. When I brought it up to the service manager, I was told that it was there before before they began to work on it and was looked at like I was trying to pull a scam. Needless to say, I raised hell but still only ended up with a free detail and did not pay for the service. I was able to buff the scratch out when I got home but that set the precedent for me. Take bike to dealer=get screwed. Back to the story at hand though... I took my bike to the dealer and spent a good half hour talking to the service manager about the pride and care I take in my bike's appearance and that I expect to come back to ZERO scratches/dents when I pick it up. The service manager ASSURED me that he would take extremely good care of my bike, there was nothing to worry about. I dropped it off Saturday for the service and a new rear tire. Well, I swung by today as they are only a couple of miles from my office to see how it was coming along. When I arrived my bike was parked about 10" from the bike lift, which had a dirt bike on it at the time. The mechanic who was working on the dirt bike had to repeatedly walk from the lift to his tool box, each time literally squeezing past my front tire and fender, his jeans actually rubbing on the fender. I immediatley walked over and moved my bike back about 2 feet. The mechanic asked me who I was and told him I was the owner of this bike and that I was not comfortable at all with how close it was where he was working and walking. He looked at me like I was crazy. I then looked at my front fender and big surprise, there is a small scratch right smack on the front of it!! I got more than a little upset and asked him how this happened. He looked at me and shrugged. I asked to speak to the shop manager and all he did was walk to the phone and over the loudspeaker, asked for the shop manager to come to the shop, customer waiting. When he arrived, I showed him the scratch and told him this is exactly what I was talking about! He rubbed the area with his finger and said it felt smooth and that he didnt think the scratch was new. This is after we had already walked the bike on Saturday looking for scratches and dents. As we were discussing this, the mechanic had pulled the dirt bike off the lift and had pulled my bike on and was taking my hard painted bags off. The first thing he did was set the bag and lid on a metal counter, no towel or anything down! That was my breaking point. I went from talking to yelling instananeously! " That is EXACTLY the sh-t I'm talking about!!" and I stormed back there, grabbed the bag and lid and walked right back to service counter where the manager was standing, mouth agape. I grabbed a couple of shop rags that were on the counter and put the bag down on top of them, latched the lid and turned the bag over. Thank god there werent any scratches, but still! At this point my head was pounding so I took a couple of deep breaths and then slowly tried to explain that this is the reason I don't usually bring my bike in for anything, it's not his bike so why, other than pride in workmanship, would he care?? The service manager looked as confused as I've ever seen anyone look in my life. I asked him what his plan was because I'm not happy at all right now. He asked me what I would like him to do. I told hime I would be much more comfortable if he would personally oversee the sevice of my bike, which he agreed to do. He promised me that my bike would be done today. It's 2:15 right now so at 4:30 when I leave I'm gonna head back over. Do you guys think I'm being over the top here or does everyone value their stuff the way I do? Be honest!
-
Purchased items from MiCarl and Skydoc17 recently. Excellent customer service. They will bend over backwards to take care of you. I would purchase from them again! I would recommend these sellers to anyone! -------------------------------- Admins & Mods, can we have a subforum created for Good Sellers so posts like this can be collected in? All members can locate them easily and provide our members a good sense of security, quality and customer service. I use this extensively in another forum I hang out with and love it. Thanks again, Rick
-
Ran across this while wandering around ebay. It's a Ventureline and it's pretty cheap right now. I don't want it, I sold the one that came on my bike. Just doing my public service for the week.
-
I have been using Rotella T 5W-40 Synthetic (Blue Bottle) in the past. I went to Walmart, Fleet Farm, and local auto stores but all I can get now is the Rotella T6 5W-40 Synthetic. The T6 has API Service CJ-4/SM where as the T has API Service CI-4/SL in the circular API logo. Has anyone used the T6 oil? Thanks Zeke
-
I have the rear tire off of the 89 for a tire change. the question is, what needs to be taken off the rim ?do i need to take the rotor off of the rim before it goes to the tire changer? This is the first time I have taken one apart for the tire replacement. And is there anything that gets done other than cleaning the hub and regreasing the teeth? Is there anything else in there i need to take apart and service?
-
Well I got my wheels back and I need to make a decision to put new tires on or put the others back on and finish wearing them out. I Currently have the Avons on but Im curious about the Elites. How do the elites handle vs the Avons. Who has both and compare them. Now important part. I dont want hear about cracking or customer service. I dont care about Michelins or Metzlers. I just want to know how they handle Vs each other. I want to buy them this week if I decide to get them so have at it!
-
Hi all... Let me start off by saying how impressed I am with all the help & feedback from members of this forum... It's a nice breath of 'fresh air', from some of those other sites... I'm wanting to service the rearend, not sure how to do it, and what's the best oil to use. It's a 96 w/4500 miles... Pretty sure it's never been done (assuming). Will I need a floor jack (bike lift)? Thanks! -
I know there were some earlier posts on this subject, but here is my story. I bought a 2007 RSV from Dreyer Honda in Indianapolis. I'm the 2nd owner, it was sold new in Illinois. For those of you who don't know, Dreyer has a Yamaha dealership right next door to the Honda store. I asked the service guys at Dreyer Yamaha to transfer the warranty and they said it was something they would take care of if/when it came in for service, otherwise it was not necessary. The handbook says it should be transferred. I'm thinking "what if I'm in Ohio or Kentucky or some foreign land (Canada?) and need warranty work?". I want to be recognized as the owner and warranty holder. So-o-o I went to Westfield Yamaha, they told me it HAS to be transferred by the original selling dealership. IN ILLINOIS! No ifs, ands, or buts. Just flat refused to have anything to do with it. I emailed the dealer in Illinois, they responded that they would be glad to help, but would have to physically inspect the bike. Well-l-l let me tell ya- I called Yamaha Motors in Katella, CA. The customer service rep. (Leona) there was GREAT! She called Indy Cycle & Ski while keeping me on the line. Before Leona and I finished talking I had a call come in from Indy Cycle & Ski from their business manager James White. I took a ride to their dealership and when I got there I was greeted by James. He provided me with a temporary warranty, told me I would be getting a warranty card from Yamaha, and then took me around and introduced me to the service mgr. and the parts mgr. and showed me around the dealership.Then I spent some time on the showroom floor just browsing. Bear in mind that this was my first ever visit to this dealer. When I need service, tires, parts, whatever, guess where I am going first? All this just to confirm what most of us already know. There are dealers out there that just don't give a damn, but if you are lucky you may find one that gives you old fashioned "we value you as a customer" service. Mel:Venture:
-
It's pretty much because the dealer's (service) are clueless about the bike. Especially the front people. The last time I took my bike in, I was hasseled about installing my Zumo GPS by cracking open the fairing...after a short standoff, I finally got my way. Now the actual tech did a pretty good job, but the service people up front are not the brightest bulbs on the tree. But today was a REAL PAIN. It was time for my 600 mile FIRST SERVICE. Plus they are supposed to install running lights that I bought when I bought the bike and the mounts just now came in...anyway, I asked that when it was installed to do it using a relay...they balked, and said, "it depends on the kit"...but we never heard of using a relay for the passing lights. Then I asked if they could pump about 5 lbs air into the front forks and about 15 pounds in the shocks on the back...they said, "Sorry sir, we don't have a hand pump". And then he says, "No one has ever brought their bike in for air in the shocks, they are set up from the factory". ??????? WHAT????? And finally, I told them when I checked my bike this morning, there were two small oil spots underneath the bike and could they please check them out, he just kinda brushed it off and said their guy would check the whole bike over...so we'll see how it works out. But I NOW know why there are so many TECH DAYS and so many guys that work on their own bikes. Wally
-
Has anyone purchased the trunk assembly or the service platform from the following website? http://members.cox.net/alvinguy/ -
I need the schematics or a book on the Radio in my bike as it dona work thanks The Yamaha supplements dealers service would be great!! Thanks Mike R..
-
Below is a link to a site were I put a copy of the 1983-1985 Service manual. This copy of the manual has the pages in it that are missing from many of the other online 83 service manuals. I rearranged PDF to put supplementary chapters to rear of manual, Layout of manual now makes more sense. 1/25/2010 I also put in the back a copy of the wiring diagrams I did for the 83-85's. About 45 meg in size. User ID and password below. username=venturerider, password=venturerider Click on blue heading at top of window below to download. [ame=http://www.scribd.com/doc/25798403/1983-1985-Yamaha-Venture-Manual]1983-1985 Yamaha Venture Manual[/ame] Gary -
This is probabply a dumb question but here goes: I just purchased a new battery yesterday and the parts guys say to charge it before I put in service. My question is can I use a 10 amp charger or do I need a 2 amp slower charge?
-
I had posted on the welcome forum, but it was suggested I move my questions here. I just purchased a 1997 XVZ13AT Royal Star Tour Classic. I was always tinkering and playing with my old ride (97 Honda Shadow VLX), and plan to do so with the new one. My initial problem is that the guy I bought it from had nothing more than a single key for it, no manuals, tool kit, or anything. I don’t even know what grade oil or an oil filter number for the first change. So two initial questions to get me started: 1) I’ve seen at least 2 versions of printed service manuals and 3 versions of electronic service manuals and am looking for recommendations - both good and ones to steer clear of. Also, any good sources – used is fine. 2) The only project that is a priority is changing the pipes. The bike has performance pipes on it that, well, are too loud for me. Maybe I’m getting to old, but I’ve got to change them. I haven’t looked closely at the pipes to tell you the brand, but my initial feeling is to replace them with a complete set of used original pipes. Anyone know of any good sources? I haven’t really seen anything on E-Bay, this forum, or anywhere else I’ve looked. Anyone upgrade and looking to sell their originals? Thanks for any recommendations on either!
-
Files Updated on 10/28/2009>> All Audio circuits now on main page, so that all schematics are now just one page. Other minor corrections done to all schematics. Text realigned for easier reading Some Line types changed for easier reading. Gary I have completed the 1st Generation schematics. My goal in doing this is to make them easier to read and reduce the number of pages needed to display the information. I have used color and line types to make the wiring easier to follow. In some cases I could not use the exact color that is being represented due to visibility and printing issues. For example yellow is hard to see on the screen and does not print well. The previous posting for the 1983-1985 models have been replaced by what is included with this post. The 1983 differs significantly from the 1984-1985 models in the areas of Flasher, Hazard, Starting Circuit Cut-Out Relays, the Hazard Switch, Canceling Unit & Diode Pack. The files for the 86-89 models that were previously posted have been revised slightly and are now at Revision B. Major corrections done included coils were numbered incorrectly in Simplified Circuit & the Flasher Relay Assembly has been updated to include flasher information. The 1990 major changes from the 1986-1989 models were the TCI, coil pick-up & fuel pump control. This post supersedes all previous posts I have done in regards to the 1st gen wiring diagrams. All 1st gen's are included in this post. The files will look best when plotted at 11" x 17" size or larger. Office Max and Staples as well as others can do this for you for a minimal charge if you want a printout. I paid $1.00 for an 11" x 17" color print at Staples. 83 Yamaha Venture TK Wiring Diagram Rev C.pdf 1983 Venture XVZ12TK From 1983 Yamaha Venture Owners Manual. 83 Yamaha Venture Royale TDK Wiring Diagram Rev C.pdf 1983 Venture RoyaleXVZ12TDK From 1983-1985 Yamaha Venture Service Manual 83 Yamaha Venture TK Simplified Circuit Diagram Rev C.pdf 1983 Venture XVZ12TK From 1983-1985 Yamaha Venture Service Manual, page 7-1 83 Yamaha Venture Royale TDK Simplified Circuit Diagram Rev C.pdf 1983 Venture Royale XVZ12TDK From 1983-1985 Yamaha Venture Service Manual, page 7-1 83 Yamaha Venture electrical info.pdf This file is a compilation of various sheets from the 1983 Yamaha Venture Service Manual that would be helpful when working with electrical system. They are not modified in any way, just as they appear in service manual. 84-85 Yamaha Venture L Wiring Diagram Rev C.pdf 1984-1985 Venture XVZ12L From 1983-1985 Yamaha Venture Service Manual 84-85 Yamaha Venture Royale DL Wiring Diagram Rev C.pdf 1984-1985 Venture Royale XVZ12DL From 1983-1985 Yamaha Venture Service Manual 84-85 Yamaha Venture L Simplified Circuit Diagram Rev C.pdf 1984-1985 Venture XVZ12L From 1983-1985 Yamaha Venture Service Manual, page 7-1 84-85 Yamaha Venture Royale DL Simplified Circuit Diagram Rev C.pdf 1984-1985 Venture XVZ12DL From 1983-1985 Yamaha Venture Service Manual, page 7-1 84-85 Yamaha Venture electrical info.pdf This file is a compilation of various sheets from the 1983-1985 Yamaha Venture Service Manual that would be helpful when working with electrical system. They are not modified in any way, just as they appear in service manual. 86-87 Yamaha Venture DS Wiring Diagram Rev D.pdf 1986-1987 Venture XVZ13DS/DSC From 1986-1993 Yamaha Venture Service Manual, page 8-41. PDF file pages #467 & 468 of 496. 88-89 Yamaha Venture U Wiring Diagram Rev D.pdf 1988-1989 Venture XVZ13U/UC From 1986-1993 Yamaha Venture Service Manual, 1988-1989 Supplement. PDF file page #478 of 496. 88-89 Yamaha Venture DU Wiring Diagram Rev D.pdf 1988-1989 Venture XVZ13DU/DUC From 1986-1993 Yamaha Venture Service Manual, 1988-1989 Supplement. PDF file pages #477 & 479 of 496. 86-89 Yamaha Venture Simplified Circuit Diagram Rev D.pdf 1986-1989 Venture XVZ13DS/DSC - U/UC - DU/DUC From 1986-1993 Yamaha Venture Service Manual, page 7-1 thru 7-4. PDF file page #265 thru 268 of 496. 90-93 Yamaha Venture DA Wiring Diagram Rev C.pdf 1990-1993 Venture XVZ13DA/DAC From 1986-1993 Yamaha Venture Service Manual, 1990-1993 Supplement. PDF file pages #495 of 496. 90-93 Yamaha Venture DA Simplified Circuit Diagram Rev C.pdf 1990-1993 Venture XVZ13DA/DAC From 1986-1993 Yamaha Venture Service Manual, 1990-1993 Supplement. PDF file pages #492 of 496 86-93 Yamaha Venture electrical info.pdf This file is a compilation of various sheets from the 1986-1993 Yamaha Venture Service Manual that would be helpful when working with electrical system. They are not modified in any way, just as they appear in service manual.
-
Files Updated on 10/28/2009>> All Audio circuits now on main page, so that all schematics are now just one page. Other minor corrections done to all schematics. Text realigned for easier reading Some Line types changed for easier reading. Gary I have completed the 1st Generation schematics. My goal in doing this is to make them easier to read and reduce the number of pages needed to display the information. I have used color and line types to make the wiring easier to follow. In some cases I could not use the exact color that is being represented due to visibility and printing issues. For example yellow is hard to see on the screen and does not print well. The previous posting for the 1983-1985 models have been replaced by what is included with this post. The 1983 differs significantly from the 1984-1985 models in the areas of Flasher, Hazard, Starting Circuit Cut-Out Relays, the Hazard Switch, Canceling Unit & Diode Pack. The files for the 86-89 models that were previously posted have been revised slightly and are now at Revision B. Major corrections done included coils were numbered incorrectly in Simplified Circuit & the Flasher Relay Assembly has been updated to include flasher information. The 1990 major changes from the 1986-1989 models were the TCI, coil pick-up & fuel pump control. This post supersedes all previous posts I have done in regards to the 1st gen wiring diagrams. All 1st gen's are included in this post. The files will look best when plotted at 11" x 17" size or larger. Office Max and Staples as well as others can do this for you for a minimal charge if you want a printout. I paid $1.00 for an 11" x 17" color print at Staples. 83 Yamaha Venture TK Wiring Diagram Rev C.pdf 1983 Venture XVZ12TK From 1983 Yamaha Venture Owners Manual. 83 Yamaha Venture Royale TDK Wiring Diagram Rev C.pdf 1983 Venture RoyaleXVZ12TDK From 1983-1985 Yamaha Venture Service Manual 83 Yamaha Venture TK Simplified Circuit Diagram Rev C.pdf 1983 Venture XVZ12TK From 1983-1985 Yamaha Venture Service Manual, page 7-1 83 Yamaha Venture Royale TDK Simplified Circuit Diagram Rev C.pdf 1983 Venture Royale XVZ12TDK From 1983-1985 Yamaha Venture Service Manual, page 7-1 83 Yamaha Venture electrical info.pdf This file is a compilation of various sheets from the 1983 Yamaha Venture Service Manual that would be helpful when working with electrical system. They are not modified in any way, just as they appear in service manual. 84-85 Yamaha Venture L Wiring Diagram Rev C.pdf 1984-1985 Venture XVZ12L From 1983-1985 Yamaha Venture Service Manual 84-85 Yamaha Venture Royale DL Wiring Diagram Rev C.pdf 1984-1985 Venture Royale XVZ12DL From 1983-1985 Yamaha Venture Service Manual 84-85 Yamaha Venture L Simplified Circuit Diagram Rev C.pdf 1984-1985 Venture XVZ12L From 1983-1985 Yamaha Venture Service Manual, page 7-1 84-85 Yamaha Venture Royale DL Simplified Circuit Diagram Rev C.pdf 1984-1985 Venture XVZ12DL From 1983-1985 Yamaha Venture Service Manual, page 7-1 84-85 Yamaha Venture electrical info.pdf This file is a compilation of various sheets from the 1983-1985 Yamaha Venture Service Manual that would be helpful when working with electrical system. They are not modified in any way, just as they appear in service manual. 86-87 Yamaha Venture DS Wiring Diagram Rev D.pdf 1986-1987 Venture XVZ13DS/DSC From 1986-1993 Yamaha Venture Service Manual, page 8-41. PDF file pages #467 & 468 of 496. 88-89 Yamaha Venture U Wiring Diagram Rev D.pdf 1988-1989 Venture XVZ13U/UC From 1986-1993 Yamaha Venture Service Manual, 1988-1989 Supplement. PDF file page #478 of 496. 88-89 Yamaha Venture DU Wiring Diagram Rev D.pdf 1988-1989 Venture XVZ13DU/DUC From 1986-1993 Yamaha Venture Service Manual, 1988-1989 Supplement. PDF file pages #477 & 479 of 496. 86-89 Yamaha Venture Simplified Circuit Diagram Rev D.pdf 1986-1989 Venture XVZ13DS/DSC - U/UC - DU/DUC From 1986-1993 Yamaha Venture Service Manual, page 7-1 thru 7-4. PDF file page #265 thru 268 of 496. 90-93 Yamaha Venture DA Wiring Diagram Rev C.pdf 1990-1993 Venture XVZ13DA/DAC From 1986-1993 Yamaha Venture Service Manual, 1990-1993 Supplement. PDF file pages #495 of 496. 90-93 Yamaha Venture DA Simplified Circuit Diagram Rev C.pdf 1990-1993 Venture XVZ13DA/DAC From 1986-1993 Yamaha Venture Service Manual, 1990-1993 Supplement. PDF file pages #492 of 496 86-93 Yamaha Venture electrical info.pdf This file is a compilation of various sheets from the 1986-1993 Yamaha Venture Service Manual that would be helpful when working with electrical system. They are not modified in any way, just as they appear in service manual.
-
Now heres a real bright bulb........ Robber Loses Wallet, Asks Victim To Return It Man Asked Victim To Meet At Service Station POSTED: Wednesday, October 14, 2009 UPDATED: 3:44 pm EDT October 14, 2009 LITTLE ROCK, Ark. -- Police said a would-be robber was in jail after losing his wallet during the attempted robbery then phoning the victim and asking for it to be returned. Little Rock police said the 23-year-old man was arrested on robbery charges Tuesday. Police said the man tried to rob a man at gunpoint at his home but fled and dropped his wallet then later called and told the man to return the wallet at a service station in North Little Rock. Little Rock police were interviewing the victim when the call came and notified North Little Rock police who found the suspect outside the service station and arrested him after a short foot chase. ___ Information from: Arkansas Democrat-Gazette, http://www.arkansasonline.com Copyright 2009 by The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.
-
I am due for the 26,600 mile (42,000 Km) service. The maintenance manual says that at 26.6K, a valve clearance check and adjustment needs to be performed. I called my dealer and was estimated 3.5 hours of labor and $400. From his description of what should be done, it seems that they'll perform a 4,000 mile service. "It is a very thorough service", he said. Does this seem reasonable? Dave
.thumb.jpg.5bc608c29d230c44c77c79acb0510cd8.jpg){kind=avatar}
