Jump to content

RedRider

Expired Membership
 View Profile  See their activity

  • Posts

    3,190

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by RedRider

  1. RedRider
    Make sure to stop at Young's Lobster Pound in Belfast. You will get a lobster roll of a lifetime. YLP buys lobsters from fisherman right at their dock. They will then take one of these fresh lobsters and throw it in the pot and make the lobster roll immediately. You can't get any fresher unless you can cook underwater. It is outstanding. Red barnlike structure on the north side of the river/inlet just of Hwy 1. Your welcome (you will thank me later). RR
  2. RedRider
    Yup, I do that on my KLR almost everytime I ride it. Should have a 6th gear. It helps if you go with a 16T sprocker (although I haven't installed mine yet). RR
  3. RedRider
    ScooterBob and all others, Looks like we are going to light this rocket. I will need to thaw out the venison keilbasa for a good feed. RR
  4. RedRider
    Cindy and Dale, This is welcome and wonderful news. Get some sleep, it will be a big day tomorrow. Look forward to hearing the final results. RR
  5. RedRider
    Not if you only push it back a little. I have changed out old to new pads and have never opened the reservoir. The only time I have opened the reservoir is to flush fresh fluid thru the line. RR
  6. RedRider
    OK all; it appears we have a handful of 'Will be there' and a handful of 'Maybes'. Good enough to make this a go. Just for you 'Maybes' - there Maybe beer still in the fridge for you. Just for edification: tools currently on hand - Carbtune - sync carbs - 10 to 30 minutes ColorTune - set mixture - 1 hr Lift and lift adapter - grease splines, install Dynabeads for balancing, oil change, brakes, etc. - varies Wrenches and various tools - clutch work, electrical work, etc. Let me know what else might be needed or wanted done. I am on the SE corner of Fond du Lac. Have plenty of room for lots of folks - camping or couches. Inside parking if it rains for a good dozen bikes. More details as this shapes up. RR
  7. RedRider
    I'll be in Ft. Wayne the following weekend for my folks 50th anniversary. Small world. RR
  8. RedRider
    I would be very surprised if the bearings were damaged. Needing re-packing with grease? Perhaps. Having done this last winter, it is a PITA - but not hard. Good luck. RR
  9. RedRider
    FYI - Save the money and purchase the plugs from the local auto parts store rather than the Stealer. Same part number and everything. RR
  10. RedRider
    An extra enticement - It is the same weekend as the Fond du Lac County fair. The Guess Who are playing Friday night and 38 Special on Saturday night. Or - we can do a bonfire. RR
  11. RedRider
    OK all you Cheeseheads and northern Flatlanders. I have clearance from the tower to have a Maintenance Day at the Estate on July 18th/19th. Wife and daughter will be heading to northern Illinois for a basketball tourny, and that leaves me to my own devices. I know it is kind of short leadtime, but we can pull this together. The VR calendar has been checked and there appears to be no conflicts. What do you say? Anybody up for beer, brats, and wrenches? Fond du Lac, WI - kind of in the middle of everything. Plenty of ground for camping, beer fridge is full (as of now), workshop is fairly clean, garage is ... well, I will need to work on that. Let me know if there is still interest and we will get it set up. RR
  12. RedRider
    The KLR is a fun machine. The first ride I took on it was in fine powder sand in the Francis State Park in SC. I had never been off road before and it was quite a bit different. The guys I was with just advised to do exactly what you would least expect to do. When the front end starts to wash out, give it the gas. Sure enough, it comes right around when you do it. My new Sargent seat just arrived today. I couldn't stand the stock 'board' for more than 150 to 200 miles. We will see how this goes. Also, have installed HappyTrails hard panniers, Nerf bars (crash bars), highway pegs, raising links, Acerbus hand guards, 1" bar risers, master cylinder protector, aluminum skid plate, Zumo mount, 4" extended windshield, official Kawa KLR tailbag. Done the license plate mod, de-Californication, added IMS pegs with springs, and footpeg lowering brackets. Made and installed a 4" tool tube. Also have a 12V electrical plug and a 16 tooth sprocket to put on once I get time. It is never ending. PM your address and I will send you a throttle lock for this baby. It is a Cat O-Ring that fits between the bar end and the throttle hand grip. I got 3 of them when I ordered. Now that I installed the hand guards, they no longer work for me. Will have to use a Cramp Buster. Still need to do the Doo, 22 cent mod, and drill out the slide. Once that's done, the only thing left is to add extra lights (HID), perhaps a fork brace, some tank panniers, and ride, ride, ride. This baby is taking me to Prudhoe Bay in 2011. However, farkles for the KLR sure are cheap compared to the Venture. Great pictures. Enjoy yourself, but be careful. It is a long way to the ground on this bike. RR
  13. RedRider
    Depends on which Corbin seat it is. If it is the king/queen (driver/rider) as one seat, it can be much more. If it also has the backrest, it can be $300+ (gone higher on EBay). Edit: Reread the original and realized he was looking for a price for the OEM seats, not the Corbin. Never mind. RR
  14. RedRider
    It's like you guys are a bunch of KLR650 owners. They(we) have the reputation of getting all our accessories by dumpster diving or modifying something from Walmart. RR - Who's only cheap when it comes to women - but never easy.
  15. RedRider
    I had just re-entered the US on the west side of Lake Superior and was wearing a half helmet and sunglasses. A bee got trapped between the helmet, my sunglasses arm, and my ear. My wife was on the back was kind of freaking out as to why I was power braking and pulling over on a narrow 2 lane road. That really hurt. RR
  16. RedRider
    Bob, Glad you are Karen are OK. Thanks for taking another of these forest rats out of the population, although, there are certainly easier ways to do this. Went for a ride with my son yesterday evening and cut it short because of deer concerns. Saw 2 right next to the road and another crossed the road about 100 yards ahead of us. It was a weird ride. I hit a seagull (need to clean the sh*t off my windshield) and almost hit a grouse. A couple of cats were also wanting a piece of me - they ran away with a blast from the Stebel horn. And this was all in a 45 minute ride. As for the damage - that'll buff out. Again, glad you and your bride came through safely. RR
  17. RedRider
    Yup, that should work. RR
  18. RedRider
    Here is a link to my ride report for the Minnesota 1000. Pics will be posted this weekend. http://www.network54.com/Forum/154362/thread/1245959830/last-1246021701/Stupid+Long+Ride+Report+from+a+Noob RR
  19. RedRider
    I am surprised at the CCC (Credit Card Companies) cancelling cards that get paid off. I could understand it if it was a card that wasn't used and had zero balance, but not one with a usage history. They make a majority of their money by getting a percentage of the dollars charged. In other words, when you buy gas on credit - let's say $100 to make the math easy - the CCC gets 5% or $5 for handling the trasaction. This comes out of the gas station revenue. Now, when you use Debit, the CCC/Bank only gets 1% of the total spent. The percentages may be off a bit (CCC may be 4% or 6%), but there is a significant difference. This is also why many places do not accept American Express. They charge a higher percentage than Visa/Mastercard. RR
  20. RedRider
    You will want to keep some type of switch in the circuit. If you eventually install heated clothing controls, there may be times you will need to turn the lights off to prevent draining the battery. Also, the DC outlet is in the fairing, clutch side, at the bottom of the fairing. You can't see it from the top. Put your head down by the shifter and look up. You will see it. It has a black plastic hinged cover on it. RR
  21. RedRider
    Pics will be posted soon. RR
  22. RedRider
    Make each transaction a 'Credit' rather than a 'Debit' and this shouldn't be a problem. Hotels do the same thing but for larger amounts. Thanks for the 'Heads Up". RR
  23. RedRider
    The Minnesota 1000 was an epic event and one of the highlights of my relatively short riding career. A total of 88 bikes took off at 8:00 Saturday morning from Leo's South (just south of Minneapolis) for parts unknown. Everyone had to choose their own route among the 60 or so bonus locations - each with a varied point value. By 8:00 Sunday morning, all needed to be back to Leo's for check in and scoring. As a rookie at this organized type of rally, I choose a more conservative route that I was fairly certain could be completed with some wiggle room on the time. If you are late by 1 second, you are time barred and considered a DNF. Total ride was 1055 miles with 13 bonus locations worth 9400 or so points (final scoring hasn't been posted yet and I don't remember the actual points). And ... I took home hardware!!! 3rd place in the Cruiser Class. I was both pleased and surprised. For anyone interested in long distance riding, this is an event to try. Great folks, great organization, and great fun. I will be back next year to try to win my class. The year after ... who knows!! RR
  24. RedRider
    Pete, Thanks for the clarification on the IBR entry. I must have read that when reviewing all the TS information and superimposed my memory on the MN1K. It was great meeting you and your wife. I had a really great time. Team Strange is a great group of folks that run a very tight ship. This rally was extremely well organized and definately geared towards everyone having fun. Everyone was very helpful to the rookies. The Harvest Run sounds like fun also. I will need to check with the boss, and the guy who signs my paycheck, to see how that weekend looks. This LD riding may end up being addictive. RR
  25. RedRider
    Just got back from the Minnesota 1000 and am catching up at work (and on my sleep). Will check with the bride on dates and get this rolling soon. Sorry for the delay. RR
×
×
  • Create New...