Jump to content

Cougar

Expired Membership
 View Profile  See their activity

  • Posts

    3,845

  • Joined

  • Last visited

 Content Type 

Everything posted by Cougar

  1. Cougar
    Stay Tuned, Going to place one LED on the back of the New LEDs (rings) I have ordered from Custom , And when installed the (1) LED on the back it will go right into the new lens that I have just added to the rear of the blinker. should even be more brighter. I also ordered to single LEDs in Amber. see if that helps and kicks butt!
  2. Cougar
    So these are the one's then. Eclipze LEDs. 1157 Thanks Bummer.
  3. Cougar
    KiteSquid, witch ones do I use for the front? and do I need the equalizer thing? 1156/ 1157 ?
  4. Cougar
    Well, I really think Brick is better then Aluminum Siding anyways! but only can afford the Vinyl Siding.
  5. Cougar
    My Goldwing only cost me $500.00 and there is no plastic.
  6. Cougar
    My Prayers to you and your family
  7. Cougar
    Yeah , that is what Lonna say's !
  8. Cougar
    Now if they only would make a small round one to fit the front blinkers in Amber, now that would be GREAT! OMG, they DO! *LOL* http://www.customdynamics.com/yamaha_turn_signal_retro.htm
  9. Cougar
    You know now that I think of it you guys are correct. watching those blinkers on the newer mirrors they are red aren't they. problem solved , I don't know these lens are over a half inch round but there not that Large to cause any jail time I don't think.
  10. Cougar
    They do not have them in Amber yet, If you find them let me know Mike. I searched Hi and Low for them that size. The lens in Kent's pictures are red as well, but show amber in the shots
  11. Cougar
    Here is Kent Hartland's DIY With my Version for Added Running Lights. He shows his version with the standard set-up . Follow his directions [ATTACH]41117[/ATTACH] Mark and drill a pilot hole on the second ring and across from the bolt stud. [ATTACH]41118[/ATTACH] I went up to a half inch drill bit and finished with my Dremal sanding tool. All my drilling was done form the inside as well. Another thing that is different is place the plastic nut that you just cut REVERSE IT from how Kent show's his. The reason is that it will clear the lens bolt tab perfect. finger tight. [ATTACH]41120[/ATTACH] I also used some clear silicon sealer and just placed a small ring around the butt of the light lens as shown. it will squish out a little and wipe right off with ease. [ATTACH]41127[/ATTACH][ATTACH]41119[/ATTACH] Here it is installed from the inside. [ATTACH]41121[/ATTACH] It is almost in the right spot to be able to notice if you forgot to turn off your blinkers. This one shows that it will be lined up with the blinker bulb. [ATTACH]41123[/ATTACH] And a few more all done , takes about an hour or less. I also added some di-electric grease to my bulbs, they were extremely dirty inside the bulb contact rings. [ATTACH]41122[/ATTACH][ATTACH]41124[/ATTACH][ATTACH]41125[/ATTACH][ATTACH]41126[/ATTACH] Kent's picture was a little blurry, so here is one that might be a little better to read the part number. [ATTACH]41129[/ATTACH] Enjoy, Jeff
  12. Cougar
    David, not sure but I think on the tank badges there is no back ground color just the tank color I think. but I am interested. PM me what you want for them. Heading off to the chiropractor for a bit be back A little later guys. Jeff
  13. Cougar
    Ya know Squid, looking at it more and more. look as though I would have to be working with a tank badge instead, All I need is the star part area. the rest can be broken off. Let me know what you come up with! Thanks, Jeff
  14. Cougar
    OH NO !! PONCH! here we go again leave it up to you.. damn it, now I have my first winter project for this coming November.
  15. Cougar
    Bob, I was just wondering what color is your 09 is ?
  16. Cougar
    Thanks Bunch Squid.
  17. Cougar
    Ok, I am doing a top secret project on the trike with a Chrysler emblem and I am looking for another logo off one of these hundreds of decks that we all have pulled for the gauges. I am looking for one with the beige color in the logo. like shown in the pic. willing to pay for it. [ATTACH]41086[/ATTACH] OR maybe even one of the badges off the side of wrecked gas tank might be better as it will be a little larger. Thanks. Jeff
  18. Cougar
    there awesome, Hannigan put two of them on the trike. used one of the originals and placed the guts into it. nice and bright.
  19. Cougar
    It would have to have the MM colors ya know. and of course chrome rims.. sheesh.. Hey going out to that garage and gunna hack the bike up now! (key bolts)
  20. Cougar
    `` I didn't hear a thing!
  21. Cougar
    Slick, remember they only made 1500 of these baby's. and don't:no-no-no: even bring up our fuel injection that they only put on these modles ! It will make these guys go crazy!
  22. Cougar
    Greg, Love the idea! You get it started and I will drop mine off! Mike, I always have loved that little trailer and I WANT IT! trade ya my deluxe piggy for it! I am now thinking I do not need such a large trailer anymore and I am looking for something cool like your to pull around. Jeff
  23. Cougar
    Come on you guys. I never have had any problems with my 1600 Engine OR my Belt Drive! Sheesh!
  24. Cougar
    Your right ,. there is no rear center wheel. please keep us posted as to what you find out please. Thanks, Jeff
  25. Cougar
    That is neat. I bet it is like a plug in type kit as well. Very Interesting.
×
×
  • Create New...