Yammer Dan
-
Posts
23,013 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Everything posted by Yammer Dan
-
Depends on if you are sitting on bike or facing it...
-
I've seen that!!!
-
Not sure I'll get there yet Kenny. That Guy that hit me this time is switching his story. I might not be able to afford to go!!!
-
I have a Color-Tune but have trouble using the thing. It takes me a little time for each cylinder and it gets too hot to handle the thing. With cooldown time it takes quite a while to do all 4 cylinders. Is there a way to do this?
-
Sounds Great!!!
-
Take it easy Lew. At least I'll have company. Be a while before i can get out there to tinker with "UGLY" I think the warden hid keys!!
-
Do you know what the "Red Roof Inn" charges??
-
Just kidding Lonna but it is kind of a challenge now. I am not evan a great cheesecake fan now I really want some. And "UGLY" is ready to go!! I can't let her down. I HOPE. And I won't push it Tooo far. Docs don't know EVERYTHING!!
-
Was in my old Buick Randy. Only 210k on it almost broken in!! But great old car. I put 170k on it with very few problems. -
If you can set the float levels on a 2nd gen you could do it on a 1st Gen?? This is something I need to learn. I'm one of those that are scared of carbs. Don't like to mess with them if I don't have to.
-
That is a good one Randy but I think I'm going to have to pull my dash as Tach has the slowes bad. Speedo seems OK but if I have to get at tach I can take time to grease Speedo good while I'm in there. Those tent pegs are a good idea. There is also a place on line that sells ABS Sheets. I have a 12" X 12" sheet of it that you can get in different thickness. My retirement project may be starting early. I have a new 1st Gen frame that won't break. A 1200 motor with a good 2nd gear. Would undercut those gears before I put it togather. Enough Bling to build a awlsome 1st Gen and go hunting for RedNeck!!! Might be a couple other little things I could add as I put it togather. V-Max heads and cams? Rear gears? Didn't mean to swipe thread just doing a little dreaming this morning as hydros are kicking in.
-
Warden don't think I can make it on the bike.... She may be right. We'll see!!
-
i am coming to get it!!!!
-
Do you deliver???:rotfl: I'm not GIVING UP!! I AM GOING TO GET MY CHEESECAKE!!!! Don't really care what kind i am just gonna get me some!!! This ain't happening I'm gonna wake up any minute!!!
-
Even cheaper is the Red Roof Inn on the pond Shore!!:rotfl: Gotta watch for things coming out of the pond!!!
-
How_To_Ge...wmv
-
I'd take a date with that anyway!!
-
I have a exhaust chamber I might get on there before Maint Day. But it sounds good both ways!! If Don has a welder with the WeldMan there?? How hard to put cover over bottom??
-
Nice!!
-
:rasberry::rasberry: Didn't have to say a word!!
-
ME? Wake my neighbors up in the middle of the night???
-
Issue When Starting Last Few Days
Yammer Dan replied to Sleeperhawk's topic in Royal Star Venture Tech Talk ('99 - '13)
Bad cable end?? -
Got her out a little this evening. Finished blowing bottom out of exhaust chamber!! Make as much noise as my neighbor's Hardley. But she is running and going down the road without any problems. Little shake if you turn loose of the bars at 50 mph. Probally that Brickstone on the front. Patched that exhaust chamber and those Jardines really sounded sweet for about 15 miles. Then POW!!! Not ment for me to own a pretty (no scratches) or a quiet bike. But 2nd gear will crank out 70 mph pretty quick. I'll shut up now. Still pretty pumped. Only got in about 40 miles. Maybe a night ride??
-
I always mix in a little gas to help with restarting. They don't like to crank on pure Sea-Foam. But I have done it pure Sea=Foam. Of course the longer you leave it sit the better but I'm usually in a hurry when I do it.
-
IN THE MIRROR???? You have your mirrors facing to the front?? That is a Sharp Goldie. Wardens favorite. Maybe I could talk her into buying one of those.....