Jump to content

Condor

Expired Membership
 View Profile  See their activity

  • Posts

    12,680

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Condor

  1. Condor
    BUMP!!
  2. Condor
    Yep... Here's what anyone in the future should look for....
  3. Condor
    Possibily a half hearted attempt at an engine oil cooler???
  4. Condor
    Got it Rick. Thanks.
  5. Condor
    Personally, what I'd do is rent a 10' U-Haul trailer, go down and yank the thing back home. Borrow a friends pick up truck if you don't have one. Having never seen it, it's the only thing that makes sense. a 14 hour ride gives it plenty of time to mess up your day big time on the way back...... Or check on the board and see if a few members in the area have a trailer and maybe a relay could be set up???
  6. Condor
    I second that. The wire leak is right over the cross-over and it will smoke until it burns off. The clutch slave is in that area too, and if leaking will also cause the bike to smoke a bit.
  7. Condor
    Check with Rick at http://www.buckeyeperformance.com/ I think he has heavy duty rebuilts for around $140....
  8. Condor
    Toss in a can of Sea Foam with the next fill up. Can't hurt anything and if there is any crud in there it'll clean it out. Syncing carbs is not a big deal if you know someone near by that has a Carbtune II.
  9. Condor
    Might be the boost sensor isn't functioning. Or.... synced your carbs lately??
  10. Condor
    Could be a short in your ignition switch.. A few members have had to mess with theirs lately......
  11. Condor
    I think the dull glow is ambiant light coming from the other dash lights.... Does the intensity change when you adjust the dimmer knob??
  12. Condor
    I'm no electrical genious, and don't do demons, but I'd take a look at the starter solenoid being bad???
  13. Condor
    Could also be one of the 'o' rings from the anti-dive unit???? Just a thought...
  14. Condor
    Just a note. Ebay just had a set of Jardine's close at $350...sumpthing. Last week there was another set that closed close to that. MAC's are lookin' better all the time.....
  15. Condor
    As long as it only whines in one particular positiion I wouldn't worry about it. Ride it until it gets worse,...... or somethin' falls off......
  16. Condor
    I just bought an aftermarket. Took the old gasket with me, and sort of matched it up with one they had.
  17. Condor
    Hmmmm.... i think i missed that part of the conversation... Still drove me nutzo............
  18. Condor
    I'm starting to understand now. While riding with a pack of 2ndGens on the way to Fort Collins I was going nutz running at 70mph when the speed limit was 75.... I guess they actually thought they were doing 75??? I knew I was in trouble when that little old lady pushing a baby carriage, along with just about every one else, passed us out in the Nevada Badlands............
  19. Condor
    welcome aboard Matt....
  20. Condor
    i had to replace one side only. Bought it at a local non-afilliated shop. Looked lead/silver-ish....kinda like oakem..... Worked. If you're carefull removing the old mufflers you may not need to replace the gaskets....
  21. Condor
    FOR ANY FUTURE FEEDBACK ON THIS THREAD IT"S BEEN CHANGED TO: http://www.venturerider.org/forum/showthread.php?t=12626
  22. Condor
    Go ahead and make it out to me Dan. JACK CHALAIS. Thanks.
  23. Condor
    Thanks for the input guys............ We now are back up to 9 on the list....for those of you that are counting.....
  24. Condor
    Well it didn't take long, but was sorta expected. We're had our first and second list casualty. Calperin had to gracefully back out due to unexpected problems, and tiny84 decide to go with a set of Road Kings off Ebay. So............... if there is anyone else that would like to join the list, now's the time. We will need 10 to place an order. See below......
  25. Condor
    So far everyone seems to like them....A LOT!! They are a slip on and you won't have to remove anything other than the old mufflers. You may have to do a little fudging in the flange area to get them lined up. DaveG had to take a little of his passenger steps to make some room on his '90VR, but others haven't mentioned that they had to?? Some longer bolts from the hardware store, and flang gaskets seem to be the norm....
×
×
  • Create New...