Search the Community
Showing results for tags 'installed'.
-
OK guys, I have spent all evening researching how to convert our member list to a Point of Interest (POI) file that could be imported to a Zumo or similar GPS. I have installed all of the Yamaha dealers into my GPS as POI's. What I have discovered is this it should be possible to do this but it is beyond my ability to do it. I think one needs XML programming skills or something like that. The POI loader can read a CSV file if it is in the proper format and I don't know what that is. If anyone would like to attempt this task you can read more about it from the forums on www.zumoforums.com. Also, in the process I found another site, http://www.poi-factory.com which has numerous POI lists that can be downloaded and installed. For example, you can download a list of all Krispy Kreme locations. Even if you don't want to take up this task and you have a GPS, especially a Zumo, you should check out these sites. There is a lot of information there. Sorry I couldn't be more help. Dennis
-
A little history: As most of you know, I have been trying to track down an electrical charging glitch which rears its ugly head at the worst times. I have replaced the side stand relay (not the sidestand switch), the rectifier/regulator, performed voltage drop tests and all was well. I then installed a "Heads-Up L.E.D. Voltage Monitor from Signal Dynamics Corp, which is micropressor controlled. It flashes red, green or yellow to tell you just what your charging system is doing, 50,000 times per second. This thing is so sensitive that the charging light goes from full green to yellow when any light is applied such as brakes or turn signals. It seems to have the worst draw when I turn on my driving lights, which run through a relay. Tonight we rode to a restaurant where the red light came on and stayed on for several minutes, indicating a failing charge condition. We never shut the bike down and rode home. A few minutes later the bike showed normal charging again, so the problem seems very intermittent. When I got home the bike fired up perfectly several times. it also started right up after 2 hours of sitting. Now to my question(s): Has anyone here ever installed this gauge on their bike? Im thinking that this gauge is really super sensitive and the variations that I have experienced are normal. SO, if you have installed this item on your bike, how has it responded? Was the green steady, or did it fluctuate whenever brakes or signals were used? Driving lights? etc?
-
Before I started tearing my bike apart...........Where is the front horn located? I installed an air horn and I want to disconnect it.
-
As I mentioned awhile back, I recently had my carbs synched, rear drive serviced, head bearings serviced and adjusted and new Metz Commanders installed. I love how the Metz track and the twisties are a WHOLE lot more fun. The bike leans itself into the turns (or so it seems) and all of the wobble is gone. Low rpm power is much improved and the bike is very pleassurable at all speeds. A problem though. Reat tire has a slow leak. About 5lbs per week. When we pulled the tire off the rear, it was full of green Slime. What a mess. I have inspected the rear tire and found no nails etc. Ran soapy water all around tire and rim, and checked the valve stem. No apparent leaks. Because the PO had installed Slime, I am suspicious of a leaking rim. Anybody with experience with this sort of problem and any easy fixes short of wheel replacement? Will Ride-On work for this type of problem? DJ
-
I have the Barron's risers and am not happy. So I'm looking at getting some bars and doing a mod over the bad weather. Anyone have some good pics of the bars installed, showing them from the side and year? I'd like to see what they look like installed.
-
Okay. This is sure to draw several opinions but I'd be happy to read them. I'd like to outfit my 04 RSV with new pipes and I'm not sure which to buy. I'd like a little more of a throaty sound without it sounding obnoxious. In other words I don't want people (especially my neighbors) to look at me when I drive by and bad mouth me like I bad mouth others with loud pipes. I saw a recent discussion on here about the Khrome Werks (sp?) but was wondering about what others have installed and liked. Thanks in advance Wayne
-
If you order one of these inspect it very carefully when it arrives. If you are using it as running and brake lights, there should be three (one on each end and in the middle) that light as running lights. There are eight, four on each side that come on as brake lights. I was installing mine today and found out that the eight were never installed on the light board.
-
Ok, New bike, new world of differents issues, of course I prefer these new problems than the olders. Situation: Get the Star4772 (Joe) 1997 royal star (6300 miles), it comes with mounting passing lamps bar (No passing lamps), wind deflectors hardware (No deflectors included) and installed leather saddlebags and non installed plastic saddlebags. After digging around, got the missing parts: Deflectors, Passing Lamps Not the big deal, now apart from pay the 88$ for the dealer installation someone knows how to align the passing lamps. It seems impossible to relocate the lamps one you mount both the lamp and the turning light on each side. The beam is lighting the floor around 7 to 9 feets on front of the bike. Suggestions???? (Please nothing related to put 88$ on a dealer...)
-
Alright. Who knows some electronics gurus up for the challenge? Anyone know a 12-year old electronics genius? Or a ham radio operator that loves tinkering. How do I get the two of these to work together? http://pinouts.ru/Devices/ipod_pinout.shtml or http://www.ipodlinux.org/Dock_Connector To work with Clarion 13-pin C-bus http://www.ultrajosh.com/images/Clarion_C-Bus.gif Any ideas? The goal is to have the dock/recharge for the iPod work with the installed system.
-
I have the fairing apart and am looking for the plug in for the CD player. There are plugs color coded with red, white, blue, yellow, and gray. What is the plug for the CD player? Or is it somewhere else? Or has this one had a CD player installed and still has the wire and it hasn't been removed?
-
"Venturedad" vs. "Vertical Hide a Hitch by Cheyenne Trailers" on the diamond r website. Has anybody installed the hidden hitch and how hard is the stinger to remove?
-
Those of you who have installed your SH: What percentage did you program into it? Would the recommended -5.5% be good enough? Are they all (RSV) off the same amount? Thanks.
-
Is this a previously know issue? Where should I begin looking? Glad I got them running lights installed. They worked wonders! I drove 43+ miles using them. They are quite bright.
-
Finally getting a few things done on the RSTD:) 1) Have had my VIP trunk on for several months 2)Installed 2 sets of blinking break light I-pod LEDs on license plate bracket. 3)installed KROMEWERKS mufflers (waiting for 30 degree slash tips to be delivered) BOY I LIKE THESE PIPES. 4) Installed engine bar brackets. You can stand on them bars now. 5) Installed break/turn/stop lights on lower edge of VIP trunk. Havent hooked up yet ---will do that tomorrow. 6) tried to order rack for VIP trunk:confused24: ---was told new rack coming out in a couple of months --said old rack was cracking trunks. DID I SAY I LIKED THE KROMEWERKS MUFFLERS:cool10: :cool10: ---Buzzard
-
Yamaha Chrome Metal Fender Tips need help
Guest posted a topic in Royal Star and Royal Star Tour Deluxe Tech Talk
Hello everybody I' d like some help. i just bought front fender chrome metal tips , the front and rear , the number i order is the exact one for the 2006 tour deluxe i tried to installed the front and it seems to small to fit to the fender i have pushed to hard and scratched the front fender oups$!@# is there someone who have installed it.i 'd appreciate tips to installed them the installation sheet seems wrong thank you -
I installed a J&M headset into my helmet tonight. Can't wait to try it out!! Biker John
-
I have just had my 05 RSMV into the shop where I had to insist on a new clutch basket because of the chirping.The dealer ordered and installed it, I had requested that he order ( i forget which one I was told about on here) not sure if he did or not, I was told that yamaha made four different ones for this problem. IT is louder than before, and when I returned to the dealer he told me that it was a one time fix from the factory and they would not do it again at there expense.Question...who has had it done and was the results satisfactory? What part number was used? After I get some more info IM going right to factory rep. I also had the exaust leak on the right Y and after much arguing with the service manager I asked for a second opinion from the factory and was told that the factory does not get involved in such matters. I knew It was Bull*%#$ he was feeding me so I told him I would contact the factory myself, all of a sudden my exaust pipe was ordered and installed.
