Jump to content

Fvogt

Expired Membership
 View Profile  See their activity

  • Posts

    47

  • Joined

  • Last visited

Reputation

10 Good

1 Follower

About Fvogt

  • Birthday 12/31/1934

Personal Information

  • Name
    Fred Vogt

location

  • Location
    Pahrump, NV., United States

Converted

  • City
    Pahrump, NV.

Converted

  • Home Country
    United States

Converted

  • Interests
    Motorcycles
  • Bike Year and Model
    1984 Yamaha Venture, RS Warrior
  1. buddy started following Fvogt
  2. Fvogt
    83-85 Deferential/final drive & drive shaft. I have pondered the replacing of the 83-85 final drive and drive shaft with a 86-93 final drive and drive shaft but never had the need to do so. A friend has a 83 that the drive shaft/coupler was worn out and with no replacement available I decided to try. After measuring the two drive systems I found no difference from in the distance between the axle shaft hole and the flange that meets the swing arm. Also the swing arms of the early & late models are exactly the same from the pivot to the axle so there was no reason not to use the 88 final drive and drive shaft in his 83. We replaced the drive shaft and final drive and after 300 miles there is no problem with the bike. With the exception of the part number of the 1991 driveshaft witch changed in 91and reverted to the old number for the shaft in 92 – 93. Besides the fact that the 91 final drive that I have, will not let me put a spring on the holder at the end of the pinion shaft I can’t figure out what changed. Although I did not find a spring on the pinion shaft when I removed the drive shaft from the 91 final drive. So I would simply avoid using a 91 for this conversion. The conversion is simply replacing the 83-85 final drive and drive shaft with a 86-90,92,93 final drive and drive shaft and never having to worry about greasing the gears again. Enjoy Fred Vogt #1037
  3. Fvogt
    Thanks I have a friend that wants to do the conversion and so I was looking for tips I could get, Thanks again for the reply Fred
  4. Fvogt
    Has anyone installed this brand of cruise control on a 83VR? It has been used on other bikes but I can't find and info foe the Venture.
  5. Fvogt
    Thanks guys I think that I can find them now. My new tent [ATTACH]45096[/ATTACH] Fred:backinmyday:
  6. Fvogt
    I have never worked on 2ed gen ventures so I need a little help. Some one has pulled the brass plugs on the Carburetor and adjusted the mixture and the owner wants me to help him make an adjustment. I have to admit that I have no Idea where the mixture screws are on the Carburetor. Can some one tell me where to look? Fred
  7. Fvogt
    Ops forgot about that, it's a common problem and I find that if clean or replace the O-ring on the Thermostat bypass it goes away. Fred
  8. Fvogt
    The way I do it is to duct tape the new one to the old one and pull it through. In this way you have the cable in the same place as the original. It is not a hard fix, I attach the top end first. . Fred
  9. Fvogt
    Frank I have the tool and it works fine. Fred
  10. Fvogt
    Looks like the way I did my spedo yesterday. No more noise! First time I had to do this in 292k Fred
  11. Fvogt
    Still a young 74 but don't get time to ride much any more. Fred:thumbsup2:
  12. Fvogt
    1983 - 89 are analog & 90-93 are digital so the pickup at the flywheel and the wiring are different. Fred
  13. Fvogt
    "It runs extremely rich right now." You may have checked the intake filter, if not do so. While you are there check to see that the slides are all moving. they should all flutter at idle. you should also check the diaphragms on the slides. Fred
  14. Fvogt
    Thanks I will give him the info Fred:Cool_cool36:
  15. Fvogt
    I have a friend that is looking for a wider, taller windshield for his VR. Is there some one still making these? Fred
  16. Fvogt
    Not to offend any one but I thought it was a little strange. Fred [ATTACH]23761[/ATTACH]
×
×
  • Create New...