Jump to content

ragtop69gs

Supporting Member
  • Posts

    4,640
  • Joined

  • Last visited

  • Days Won

    8

Everything posted by ragtop69gs

  1. Looks like a Quadracycle!!!
  2. Puc, I hate to tell you this, but, we just rode from NW ohio to southern Indiana and the rain just kept gettin harder! Finally ducked into a motel for the night and will try again in the morning. The Wabash river is a block away and we're hoping our bed doesn't float away tonight.
  3. 3:73 Ratio Be sure to check the clearance to the lip on the inside of the wheel opening.
  4. Well, that just plain sucks Been there, done that and it's never a fun time. Is that a lake behind the house or a flooded field? I was lookin forward meeting you and Tippy. We're praying for it to go away.
  5. ragtop69gs

    Yammer

  6. But Larry, I already own one of everything you make ! Got sumptin new to get my $$ ??
  7. My fault, I didn't look at his profile and assumed that since he asked me for part numbers his was a 2nd Gen. Sorry, Suds, for leading you down the wrong path. Wouldn't be the first time I've been accused of that! A nice 2nd gen will fix that
  8. I ordered from http://www.RonAyers.com 1FK-16381-11-00 Slave Cyl. $67.31 90201-10118-00 Washer plate (copper sealing washer) NEED 2 $3.58 3JP-15461-01-00 Middle gear cover gasket $2.82 93102-14209-00 Shift shaft seal (may as well replace while in there) $4.44 90338-11152-00 Rubber plug for cylinder water jacket ( I bought 2 as spares) $9.50 2H9-18154-00-00 Shift rod dust cover (rubber boot)(Optional) $10.50 for 2 Total $98.11 with free shipping code "Shipfree13" at checkout.
  9. I ordered from http://www.RonAyers.com These part numbers apply to 2nd Gen 1999-2013 1FK-16381-11-00 Slave Cyl. $67.31 90201-10118-00 Washer plate (copper sealing washer) NEED 2 $3.58 3JP-15461-01-00 Middle gear cover gasket $2.82 93102-14209-00 Shift shaft seal (may as well replace while in there) $4.44 90338-11152-00 Rubber plug for cylinder water jacket ( I bought 2 as spares) $9.50 2H9-18154-00-00 Shift rod dust cover (rubber boot)(Optional) $10.50 for 2 Total $98.11 with free shipping code "Shipfree13" at checkout.
  10. I do I'll post them in a while, got to go out to garage.
  11. Riding into Climax from the east there's a Warning of cattle on the road, the picture is of a long horn bull with udders ! Must be one of them there transgendered bovine
  12. Here's a few on my play list. I have 48 GB on 2 cards hat I rotate. Below is just scratching the surface. I don't want a pickle.......... Arlo Most tunes by the Rockets, ZZ Top, Stevie Ray Vaughn, BB King, Jimi, Janis, Doors, John Valby, Yes, Zepplin, Old Crow Medicine Show, John Mellencamp, Leon Russell, Blind Faith, Cream, Del Mccoury band, Clapton, Humple Pie, James Brown, Joe Cocker, John Mayall, Kenny Wayne Shepard, Lou Reed, Skynyrd, Marshall Tucker, Molly hatchet, Ozzy, Ralph Stanley, Robin Trower, Run C&W, Savoy Brown, Ted Nugget, ten years After, The Fugs, War
  13. HORN NOT WORKING!! WATCH FOR FINGER Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
  14. This link is for Kuryakyn's ebay store, I buy my clamps there and have never paid more than $12 each, look for the blems, that's what I buy and they have always looked like new when I get them.
  15. Take the money and run. If you can afford to do the buy back you could get the wing, repair the rstd later and put some more cash in your pocket for wing bling Don't forget to take any custom parts off and replace with stock items you may have saved, before you turn it over to the ins. co.
  16. I've taken Jeannie's trike into a round-a-bout and done circles going faster and faster to see when a wheel would lift, never did get one off the ground before centrifugal forces wanted to rip me off the trike. I have also weaved down the highway in and out of the lane line and it handles the quick weight transfer real well at freeway speeds. Gotta love them Hannigans
  17. Sucks to hear this, but at least he was able to walk/ride away. Heal fast Mark.
  18. No more riding with my buddy !
  19. Replace the slave cylinder. Mine did the same thing. While you're in there replace the shift shaft seal too. I just finished up that job on mine. I had about $75 in parts. Slave cylinder, shift shaft seal, copper compression washers, rubber boots for the shifter linkage rod. Best price I found was from RonAyers.com
  20. I measured the shift rod on the wife's trike and came up with 16 3/4" total length.
  21. I measured the shift rod on the wife's trike and came up with 16 3/4" total length.
  22. I'm not talking about the vertical pedal adjuster, that spec is 1.06" If you look between the pipe and engine you'll see the long rod that connects the shift pedal to the transmission shift shaft, that's the one I'm referring to, it runs parallel to the ground .
  23. I just got done installing a new clutch slave cylinder, while in there I put in a new shift shaft seal and removed the shift linkage that runs along the exhaust pipe so I could replace the rubber boots. I counted the threads showing at both ends before I removed the ends, put it all back together and now when I shift into neutral I can feel a vibration in the handlebars and hear a slight gear noise like it's not completely in neutral. How smooth and noise free is your 2nd gen when warm and in neutral? Any vibrations that go away when you pull the clutch in? Now for the question. What is the length of the shift rod supposed to be? can't find that spec anywhere in the service manual. Also when not moving, but shifting through the gears, I need to release the clutch a tad in order to downshift, is that normal ?
  24. If I remember right, my 1 1/8" combo wrench fit it. Not sure what the metric equivalent is.
×
×
  • Create New...