Marcarl

In a Garmin Zumo you can go to settings, navigation, and then avoidances, and then you can avoid all kids of stuff.

If you don't have the time or wherewithall to do it right the first time,,, where are you going to find the same for doing it all over again the second time around??? Not that easy to type and a whole lot harder to do,,, I Know!!!!

Best put it on a jack and then run it in gear, maybe give you a more direct area of the problem. As you describe it, it could be anywhere between the rear wheel and the engine. Sounds in the drive train can change when the forward pressure is taken away.

Stock connects 1&2 and 3&4. If you connect them opposite of that you will have a puf puf out the back at either side and a build up of pressure on either side. My thought would be to go to #2 pictures, makes more sense to me.

It's BLUE,, wow,, I mean BLUE,,, must be FAST, keep hold of the reins and keep her up straight. Nice looking ride,,, enjoy.

My nose is dripping and it ain't even cold now. Got to say that my kids are doing a much better job of this than we did. Yes money is important, but does is really matter that we die broke with our family at our bedside? I think that would be a lot better than dieing watching that big screen with surround sound and a 'Caddie' sitting there to take us to the next stop. Thanks for the reminder!

Ouchie Ouchie,,, be careful not to put too much air in them there tires, tends to make them slippery to say the least, and they will be slippery for the first 50 to 100 miles anyways.

Maybe one ot the steps you missed is that Plastifix will not adhere to paint, so the paint has to be removed, also from the back side. The other step is to make sure in the situation of a tab, that you build up the inside corners as best as possible. I have fixed a number of tabs and cracks, and the only one I had problems with were the ones where I didn't remove the pan first. And everything has to be CLEAN!

Wow,,, another birthday, now that is one you don't get to do again, so better make it good. Congrats, and hope you can enjoy many more.

I would start with the fuse box, check all the fuses by taking them out, check them and then put them back in, in the process you will find some loose holders and when you go to tighten them up, you find that they break, so then you will need to fix that first. If that doesn't clear your problem, replace the fuel filter, and the fuel line going from the pump to the carbs, for it has been known to cause problems. If those two areas don't give you satisfaction you'll have to become more sophisticated.

May have broke the u-joint after the middle gear, maybe stripped out a spline on the drive shaft, or done some damage in the pumpkin. I would guess the u- joint for starters, but others will soon find more stuff to hand to you.

Now we have to stay off the roads as well????? how much time do we have, this could be kind of touchie,,,,,,is she going to have an announcer to let us know she is coming? Actually, looks good, might fit her to a T, and after you're done with it, she should be happy.

Nah,, tooo late,,, strike three and you out you know!

Let me Steam on that for a day or so, I think I might be interested.

And you expect me to post that HERE???????

Got to watch which side of your mouth your tongue is hanging out, if it doesn't work from the right side, stand up, turn around, hang your tongue out the other side, and in it goes.

Early bird gets the worm. Early to bed, early to rise, makes a man healthy, wealthy and ,,,,can't remember the rest. Oh well, worked good for the healthy part. And I don't live on the east coast,,,, but I did get this one. I think though that the couch, if there is one, is already taken.

Why's that??? you have a Queen???

Sorry Bob, you could have the couch if there is one, or maybe there be room in the tub. You know there is only room for one KING in a bed at a time eh?

She's not coming, that's why the king thing would fit to a T.

You just never know,,, a lot of times where there is a king, there is also a queen,, or at least a wannabe.

I'll take it,, does it have one or two beds?

Pick up a whole new antenna, with a bottom load coil, should be less than $20. You will need to match it or like was said, you'll burn out the output transformers, you can receive fine, that's no problem, just don't try to transmit.

I noticed he had his kick stand up,,, smart!!!