Search the Community
Showing results for tags 'source'.
-
Do you have a backup heat source? Our furnace run most of the night keeping the house at 70 degrees. It was -5F here this morning. I'm going to buy a vent less NG space heater as a backup source of heat. 99.9% efficiency is not bad. Several of my neighbors run them as a main source of heat and there very popular as a garage heater. I just got to keep the batteries up in my carbon monoxide detector but not sure how much of a problem cm will be. Lowes just dropped the price on them again. $209 is not bad for a 30Kbtu unit. I might get a LP model for the camp to.Our old furnace is 30 years old.Nothing like working on one in the middle of winter. I had the blower go out one winter,lost the gas valve,and the 24 volt transformer that activates it. Also the termal coupler seems to go out when the local hardware store is closed.The wind blows the pilot light out about once a week.I might have to replace that furnace before long.
-
Can I grease the ball? Do I need to keep it clean to provide a grounding source for the trailer or does the 4-way flat do that?
-
Hi folks, New here, and my 'new to me' 88 Venture is in the shop and needs a new rear drive. Anyone here have a good source? I'm in the Twin Cities area of Minnesota. Thanks!! Becky -
I'm finally going to insulate my garage tomorrow. It's just a small 1 car unit, anyone have any good thoughts on a reasonably priced heating source?
-
I've mounted my Ipod to the handle bar of my RSTD with a universal telephone type mount. It looks good, is sturdy and should do well. Problem is, how do I supply power to the Ipod? Does anyone know of a power chord for an Ipod that does not come from a cigarette lighter type plug? That is how it works in my car. I'm afraid of screwing up the electronics in the Ipod with a direct 12 volt hook-up. Any help is appreciated.
-
Hey gang, I'm looking for a source to buy new main diaphrams and air cutoff valve diaphrams for mikuni carbs (1987). Does anybody know a good source or vendor that might have these parts in stock at a reasonable price. I appreciate any helpful input. -
Just got my 2008 BlackCherry RSV last weekend, and WOW what a ride. can't wait for this weekend to get on it again (live in Tampa, Fl) I found the Aux line splitter on the Tech Lib and will attempt that this weekend. As I will have the farring off was hoping to find a power source tied to the ignition to power the XM radio. Is there any available or should I take the seat off and use that one. Ride safe.......
-
If anyone is looking for a source for service manuals on CD, try this one http://stores.ebay.com/CycleHippie $6.95 plus shipping. If he has one fo r your ride, you can't go wrong.
-
The shifter bracket portion (lower rear corner) on my 86 left side case broke off leaving the linkage dangling. Anyone know if these can be welded? Is it alum. or magnesium? Or is there a source to by this piece. Thanks, Gary
-
Who has a source and part number for a good replacement CB ant for the 99?Anything other then OEM out there?
-
I'm looking for a smooth billet breather covers for the 2nd Gen. like those pictured below. Part number: STR-4NK27-15-01 http://www.psndealer.com/dealersite/images/ec0268/STR-4NK27-15-01.jpg Please Email me if you know of a source other than the $150 price I keep seeing. Thanks...
-
83 Mixture Screw Source???
zagger posted a topic in Venture and Venture Royale Tech Talk ('83 - '93)
I finally found the reason why a couple of cylinders were idling super rich - the tips of two idle mixture screws were missing, busted off by some previous owner! In looking at the carb exploded diagram it doesn't seem that these screws have a part number and I am guessing that they aren't available from the dealer (I'll check tomorrow morning). Anyone know a source for these little stinkers? Anyone have a couple of old carbs they might like to sell? Feeling a little gloomy right now. zag -
Has anybody found a cheap source for bulk LED Wedge Bulbs that fit into #161 or #168 sockets? Should look something like this: http://www.customdynamics.com/Images/4802-honda.jpg I am think about converting all my additional lighting to LED's to free up some capacity for the trailer lighting. Generally these seem to run around $5 to $9 a piece, but I think that must be a tremendous mark-up, especially when you are looking for 20-25 bulbs in amber and red. Thanks in advance, Klaus
-
Anybody have a source for polished T304 Stainless Steel Sheet 20 or 22 GA. in #8 or Super #8 mirror finish? I am looking for a cut piece of 24"x24" dimensions. I usually get my specialty metal through onlinemetals.com, but they just offer #4 brushed and no possibility of ordering small quantities of #8. The local steel yards will just order huge quantities for architectural purposes. Thanks in advance, Klaus
-
Just in case somebody has some extra money to spend, Kennedy makes a Bluetooth interface to connect cellphones, GPS etc. wirelessly to your standard 5-pin DIN intercom system. Here is a link for a possible source, options should fit 1st and 2nd Gen bikes: http://www.cyclegadgets.com/Products/KT/detail.asp?SET=CELLBT&3=KT-CELLBT-DEV-TTR Not cheap, but interesting... Klaus
