playboy

I'm still trying to figure out who was on first. The longer one or the one that was longer than the short one. But thats why OLD GUYS RULE

You know a picture is worth a thousand words. So hush and post the pictures:stickpoke:

Have you checked for a warped rotor ? You should be able to turn the wheels while it is on the jack and feel it.

If it's the lock mechanism that is hanging you up it should. IMHO some dry graphite would be better. You can get it in a pencil type container hold the slide cover over and give it a tiny puff. Shouldn't take but a tiny amount. You could just apply some to the key and work it in and out a time or two.

Don't cut anything on the bike and get one of these http://www.venturerider.org/classifieds/showproduct.php? Then wire either 4 or 5

You tried any WD-40

I feel your pain Jeff I think some 6' legs on my carbon one lift adapter would help that or dig a hole beside the bike to stand in.

We do get a lot of high winds at times but very little snow. The one you bought looks like it's mounted through plastic. I'm thinking the UV rays are going to kill the plastic in a few years and the wind will just take it away.

So how far are you away from the signal Cougar

That looks like the Antenna I already have probably 20 years old and few of the bars missing.

We tried the Roku box a few months back but didn't like it. For everything we wanted to watch required a fee. For what was free apparently our internet connection wasn't fast enough.

Thanks for posting this I am fed up with the cost of dish network and lack of programming and there habit of dropping channels out of a package and placing them in another higher price package. Finally dropped to the very basic just to keep the local channels. I noticed in the first link of your first post that that ant. comes with amp, rotor,and remote as well as cable. The price of that unit is cheaper than the best ant. that best buy has and none of them are rated for 150 miles.

Did you tell the guy he could be helping St Judes by using your house.

Best drawing board you can have is some test rides in all kinds of parameters and prove the nay sayers wrong. I know your man enough to speak up if it doesn't work. Nothing wrong with being creative.

He could always stick a pillow where the trunk should be pull the cover over and take a nap. Whats a few more hours in the saddle going to hurt.

OH wow I thought it was a parts list for a 1st gen. so I didn't bother. But welcome to the madhouse.

He rides a 2nd gen so he is used to seeing some country and putting miles behind him.

Summerville and Goose Creek aren't you two practically next door neighbors.

Mine and probably everyone Else's are broken also. There are a couple threads for making a support brace one of those was posted by V7Goose. Some have added a zip tie to help support it. But I think pretty much all of this has been done after the break.

Have you pulled the foam cover off to see which way the mic is facing.

If you poured to ground level and need no back fill then what forms are there ? 2 weeks should be plenty of time for curing before erection. If you have some edge forms around the top you can remove them the next day no problem and depending on the slump you poured and the temperature you could probably remove them sooner. Next time don't leave your re bar in contact with the ground outside of the pour. the reason for this is the re bar with start rusting where it is in contact with the ground and over time the rust will migrate into the whole re bar system. But hey it will still out last us both.

James on the furniture that you will have to assemble one thing I have learned that will help is Gorilla Glue. I use it on all the joints when assembling this type of Furniture and feel it adds a lot of strength to the product especially if it's going to be moved later on.

Me Thinks You Need A Bigger Hammer That one on the floor is a we bit small.

So what was meant by Launch on impact ? Did he try and power through it or was he flying through the air with his guardian angel.

Reminded me of the movie Christine so be careful.