sgn Posted October 3, 2010 Share #1 Posted October 3, 2010 I have a source for the solid motor mounts for the 1st Gen and Vmax. Made from 6061 Aluminum, all six pieces as 1 set. At this time I would like to see if there is an interest from folks. Pricing is $50.00 for each set including shipping to 48 states, I will need to check on shipping to our Canadian members. All orders would be shipped from me and a Paypal account setup to receive funds, those that wish not to use Paypal arrangements can be made accommodate you. AT THIS TIME this is just an offer, if there is enough interest (20 sets) I will get things moving forward. My plan is to offer these to be delivered in time for a great winter project. If you have priced these you know this is a good deal. I am not interested in making a personal profit from the group buy. All of you have offered me plenty of support and knowledge that can never be repaid. So if interested please respond by sending a personal message via the forum. If you need more info my telephone number is listed in my profile. Thanks to all of you. Steve Neal Link to comment Share on other sites More sharing options...
Yammer Dan Posted October 3, 2010 Share #2 Posted October 3, 2010 Me!! Me!! Me!! Link to comment Share on other sites More sharing options...
Condor Posted October 3, 2010 Share #3 Posted October 3, 2010 I have a source for the solid motor mounts for the 1st Gen and Vmax. Made from 6061 Aluminum, all six pieces as 1 set. At this time I would like to see if there is an interest from folks. Pricing is $50.00 for each set including shipping to 48 states, I will need to check on shipping to our Canadian members. All orders would be shipped from me and a Paypal account setup to receive funds, those that wish not to use Paypal arrangements can be made accommodate you. AT THIS TIME this is just an offer, if there is enough interest (20 sets) I will get things moving forward. My plan is to offer these to be delivered in time for a great winter project. If you have priced these you know this is a good deal. I am not interested in making a personal profit from the group buy. All of you have offered me plenty of support and knowledge that can never be repaid. So if interested please respond by sending a personal message via the forum. If you need more info my telephone number is listed in my profile. Thanks to all of you. Steve Neal Put me down for a set if it works out.... Link to comment Share on other sites More sharing options...
friesman Posted October 3, 2010 Share #4 Posted October 3, 2010 I had Rocket put a set in mine 2 years ago when the engine was out and it stiffened the frame and really improved the handling. I would really recommend this to anyone, esp at that price. I was worried about vibration but I really didnt notice a huge difference as theses engines are so smooth. Although, i can say when your carbs need to be synched you notice it sooner. Brian Link to comment Share on other sites More sharing options...
Pegasus1300 Posted October 3, 2010 Share #5 Posted October 3, 2010 Put me down for a set. Link to comment Share on other sites More sharing options...
Trader Posted October 3, 2010 Share #6 Posted October 3, 2010 (edited) Sounds good to me! I would take a set! Edited October 3, 2010 by Trader Link to comment Share on other sites More sharing options...
camos Posted October 3, 2010 Share #7 Posted October 3, 2010 A set for me too please. Link to comment Share on other sites More sharing options...
Dano Posted October 3, 2010 Share #8 Posted October 3, 2010 Heck, put me down for a set for the 87, they'll probably be ready when I go to work on it again this winter....... If I don't get to it this year, at least they'll be there next year!! Link to comment Share on other sites More sharing options...
VentureBob Posted October 3, 2010 Share #9 Posted October 3, 2010 Can these be swapped without pulling the engine? Link to comment Share on other sites More sharing options...
Grisolm1 Posted October 3, 2010 Share #10 Posted October 3, 2010 Ditto that. If they can be changed w/o pulling motor put me down for a set. Link to comment Share on other sites More sharing options...
dingy Posted October 3, 2010 Share #11 Posted October 3, 2010 Steve, I will take a set. Gary Link to comment Share on other sites More sharing options...
Condor Posted October 3, 2010 Share #12 Posted October 3, 2010 Can these be swapped without pulling the engine? If I remember correctly the back two mounts are a PITA to get out, and some folks have just let them be.... Link to comment Share on other sites More sharing options...
dingy Posted October 3, 2010 Share #13 Posted October 3, 2010 I have some pictures attached below that show various angles of the mounts when I was reassembling my bike this winter. This is to help show what is involved with changing them. The left rear and the lower left front appear to be the difficult ones. Gary Link to comment Share on other sites More sharing options...
Wizard765 Posted October 3, 2010 Share #14 Posted October 3, 2010 I'm in for a set as well... Link to comment Share on other sites More sharing options...
MasterGuns Posted October 4, 2010 Share #15 Posted October 4, 2010 Darn, I just had the motor out but I'll take a set anyway. Link to comment Share on other sites More sharing options...
barend Posted October 4, 2010 Share #16 Posted October 4, 2010 tentatively, yes! Link to comment Share on other sites More sharing options...
Rocket Posted October 4, 2010 Share #17 Posted October 4, 2010 Could use a set for the 86, as the 83 was previously done. Link to comment Share on other sites More sharing options...
Condor Posted October 4, 2010 Share #18 Posted October 4, 2010 tentatively, yes! Tentatively No!! Link to comment Share on other sites More sharing options...
Grisolm1 Posted October 4, 2010 Share #19 Posted October 4, 2010 I'm in. That cussing sound you hear in the distance will be me putting in the left rear mount!!!!!!! Link to comment Share on other sites More sharing options...
mrich12000 Posted October 4, 2010 Share #20 Posted October 4, 2010 Me to. Nice pictures Dingy!!! Link to comment Share on other sites More sharing options...
sgn Posted October 4, 2010 Author Share #21 Posted October 4, 2010 I count 13 need 7 more to proceed SGN Link to comment Share on other sites More sharing options...
Trader Posted October 4, 2010 Share #22 Posted October 4, 2010 Steve, one day, you will have to let us know how you ended up with a moniker like "tent peg" There's gotta be a story there! OK......, we need 13 more orders! Link to comment Share on other sites More sharing options...
sgn Posted October 4, 2010 Author Share #23 Posted October 4, 2010 see this post: http://www.venturerider.org/forum/showthread.php?t=41507 there is more to the story ... but isn't there always Steve p.s. works for bump also Link to comment Share on other sites More sharing options...
GolfVenture Posted October 4, 2010 Share #24 Posted October 4, 2010 I'll take a set for my 89 VR. Link to comment Share on other sites More sharing options...
coy55boy Posted October 4, 2010 Share #25 Posted October 4, 2010 I'm in... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now