Jump to content

sleepy2

Supporting Member
 View Profile  See their activity

  • Posts

    1,174

  • Joined

  • Last visited

  • Days Won

    48

Everything posted by sleepy2

  1. sleepy2
    Update on truck----part that failed was the main fuse-box under hood.Finally picked truck up yesterday. Had to phone them and left message--2 hours later they called to say truck was done. Went to pick up and ended up $1350can part $900+ labor + diagnostic + tax(government tax added) Got in truck to leave AND Air-bag light came on--drove around building right back into service so tech could check it out. Found out this was the second unit tried as replacement was defective. After getting new one they forgot to make sure all fuses and relays were seated in the box so ABS and Air-bag lights came on. They said instructions didn't tell them to do this?????? I think it would have been the first thing to do without being told. All in all everything seems to be all right for now. Seems the saying goes and usually applies to me If It wasn't for bad luck I wouldn't have any luck!!!!!!!!!!!!
  2. sleepy2
    Thanks Kretz for turning them around. Carl used step drill to cut the end hole(of the grips) out to the thread size of the weights then turned down roughly 1/2 in. or so of the chromed shoulder so it could slide in and bolt up to handle bars. They look and feel great. Thanks again!! Carl also mentioned how well my bike seemed to be holding the trailer. When I got home and had my son help me take bike off my truck had every idiot light on the dash light up and started dinging. Took into dealer on Tues. and found out it could be part of the computer as the part is going to cost $900can and a total of $1300can to get it back. Had to wait till Wed. to get part in overnight but snowed in morning and 2 mechanics couldn't get to work and the tec who does this work phoned in sick so waited till Thurs. but jobs from Wed. were to go first before mine and so didn't get any where until today and just called and am waiting to find out if I get it back today
  3. sleepy2
    Can't seem to find anything to rotate the pictures but THANKS Carl for your help in turning down my bar weights down to fit inside my new Kurriakin hand grips!!!!!!!!!!
  4. sleepy2
    I am also working on getting time off for that time but won't know till the end of March at least.
  5. sleepy2
    :santa:MERRY CHRISTMAS to all from both of us!!!!
  6. sleepy2
    I had a great time yesterday even with the 1 u-turn! Good weather-good friends!
  7. sleepy2
    Phantom & myself give both of you our congratulations and hope for many more!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  8. sleepy2
    Sorry Evan but have to comment about last picture. Couldn't solve Harley leak LOL.. Great day and nice visit with eveyone. Food was also great thanks to BOTH host & hostess!!!!!!!!!
  9. sleepy2
    Gary(GaryN), Carl(MarCarl), Abdul(Chabicheka) Paul, Evan (Evan) Mary (Grez007) Mary, John (Relic) Dianne (Relic), Don(XV1100SE), Bernie(Dogman), Ben(Saddlebum) Dave(Dogman), Mary(GaryN) Carl, GaryN Mary(GaryN) Paul, John, Don, Evan, Dianne, Ben, Bernie, Dave, Mary(Grez007) Abdul, Don, John, Dianne, Ben, Paul, Marca, Dave, Bernie Abdul, Evan Abdul, Daisy Abdul, John, Mary(Grez007) Marca, John, Dave Daisy Paul, Mary, Bernie, Marca Dianne, Dave, Ben, John, Don Abdul, Anne(Evan) Paul, Mary Here are some pics from fall maintenance day
  10. sleepy2

    battery

    sleepy2 posted a topic in Watering Hole

    Went to go to Picket line and bike turned over good but wouldn't start so retried and nothing just buzzed. Put spare in and took to battery shop and they tested it saying there were no bad cells but needed charge. Put on charger for less than 2 hours and said it was charged. Tried test that was suggested -rev bike to around 2500 to 3000rpms and check voltage which was around 13.7v. Is this OK (they said should be over 14.5v) or should I look into a new voltage regulator? Anything else to check. It is a 2012.
  11. sleepy2
    Battery charged up in around 2 hrs at 2amp. Took off and checked at 12:54 volts. Checked spare battery I put in and revved bike up to what sounded about that rpm and stayed around 13:75volts. Think this OK or should I investigate further?
  12. sleepy2
    Went to go to picket line(our local union 88 is out because of corporate greed[my opinion]they shipped one of our vehicles to MEXICO ) and bike didn't start right away so tried second time and bbbbuuuuzzz no start. So got tools out and put in spare battery I had laying around and took battery in for test and they said no dead cells but tester said recharge and recheck. Brought battery home and put on regular charger at 2amps like they said and 2 hours later it said full charge. So not sure if battery will be OK or should I check charging system. Battery is 5 years old but have got longer time out of it.
  13. sleepy2
    Seems to be the only way anymore. I keep trying! At least some have met her in person.
  14. sleepy2
    Thanks for the comments and am glad you like them!
  15. sleepy2
    Sorry Don that picture just jumped in.
  16. sleepy2
    Well thats all the pictures I have! hope you like them!
  17. sleepy2
    SORRY for all the pictures that are sideways! I tried everthing but couldn't get them right
  18. sleepy2
  19. sleepy2
  20. sleepy2
  21. sleepy2
  22. sleepy2
  23. sleepy2
    Sorry pictures not all right way tried
  24. sleepy2
  25. sleepy2
    Got home around 4pm. Had a great time riding with my fellow riders except for the time at border crossing( must have answered about 10 questions before crossing. Just as we got to last of us going to booth they opened up another one. Tooch got thru a lot faster as he went into line beside us. Must have been my comment about being lucky we weren't in the line going into the U.S. as it was up over the bridge and all booths open. When we got over the bridge all lines leading to the 7 booths were backed up behind us also. when we got thru border and said our goodbyes the line on the Canadian side was backed up for miles before Duty Free Many thanks to ALL who spent their time and thought into putting on (in MY opinion) another GREAT Western New York rally this year. I very much hope there will be another next year as it is one of 2 that I can usually get to go to. The other is Freebird's Maintenance day. So hopefully many more people will be able to attend ----please try as I would love to meet more new and old friends . Some I have met before and those I only know on the web site.. You missed a great Western New York rally and also----plug----Ontario's National Rally in Mindon Ontario which was ALSO a great weekend! This is also MY attempt to convince all those who are on the fence about coming to any or all 3 of these events----try---as you will have a great time.
×
×
  • Create New...