Last time I looked I didn't see anything surplus,, I did see some stuff in other categories though and I'm glad it's stored at your place and not mine.
Try under the right side cover under the seat. Carefully and gently as possible pull and tug on the cover to remove it. It's held in place with plastic pins and grommets.
You might have blown a fuse maybe due to a chaffed wire. Check the fuses and then check the wiring for bare spots,,, or maybe a mouse chewed through the wires.
Not everyone who is called a mechanic can properly tighten steering head bearings. I would loosen them off about a 1/16" and see if that makes a difference, often it will. They need to be tight enough to offer a very slight drag, but only very slight, a little too much and the bike will 'drift'.
Thanks for telling us Don, you just don't know how important BOTH of you are to the rest of us. Will consult with the Great Physician and Master for both of you.
Don't worry about the drive or directions, you are there already.... duhuh!!
Let me check what I can figure out. Might take some time seeing as my forgetter is fixed again.