atlm Posted November 24, 2009 Share #1 Posted November 24, 2009 Sometimes when going about 60 mph, I hear a high pitched sound coming from I-don't-know-where. If the bike is straight up, it goes away. If I lean slightly left or right, it's there, significantly louder than the wind and road noise. Doesn't seem to matter if I'm accelerating, decelerating or pull in the clutch and coasting. Since it only seems to happen at one small range of speed, gets much louder when at a slight angle, and doesn't seem to change with accel/decel, my guess is that it's the tires, but I thought I'd post here just in case it's something that needs to be addressed. Has anyone experienced anything like this? Do (Dunlop 404) tires whine at certain speeds? Link to comment Share on other sites More sharing options...
YamaDuck Posted November 24, 2009 Share #2 Posted November 24, 2009 I had the same thing happen with my Road Star with the Brickstone tires. Changed tires and the sound went away. Link to comment Share on other sites More sharing options...
Herb In Texas Posted November 24, 2009 Share #3 Posted November 24, 2009 Fork tube skirts vibrating. Mine does it warming up on choke. Found it by accident cleaning off a grass hopper. Link to comment Share on other sites More sharing options...
hillrider Posted November 24, 2009 Share #4 Posted November 24, 2009 On mine, it's the tires. A result of too many straight roads. A hundred miles in the mountains at it'll go away. Link to comment Share on other sites More sharing options...
royalstarjac Posted November 24, 2009 Share #5 Posted November 24, 2009 D404's are not enough tire for the RSV. Don't worry, they won't last long. Then you can put on some Avons and you'll have a whole new bike! Link to comment Share on other sites More sharing options...
jlh3rd Posted November 24, 2009 Share #6 Posted November 24, 2009 i get a whine in the corners....and it's coming from the tires.....however, the pitch changes with the speed....the tires are the stock 404's , and i'm over 12,000 miles with them......i'm sure it's your tires Link to comment Share on other sites More sharing options...
sarges46 Posted November 24, 2009 Share #7 Posted November 24, 2009 On my first 2nd gen (05 midnight) I had metzlers (came with the bike). But as they wore I had a terrible howl when cornering. I changed them when I found a nail in the rear and went to the avon....the new owner still has em on and is pleased. My current bike has avons on it and I like em alot. Link to comment Share on other sites More sharing options...
Sylvester Posted November 24, 2009 Share #8 Posted November 24, 2009 D404's are not enough tire for the RSV. Don't worry, they won't last long. Then you can put on some Avons and you'll have a whole new bike! I run D404's because they have gangster whitewalls. I am on my fourth set and although they do not provide the high mileage of Avons and Elite III's, the cost per mile is not much different. And since I have my own changer and balancer, this is not an issue. As far as handling, I am very happy with all the tires (D404) that I have run. I get good wet traction and dry pavement traction. And mine have never had a high speed whine. Now the Metzlers before Dunlops are a different situation. They howeled and had problems with the belts breaking. Link to comment Share on other sites More sharing options...
Cougar Posted November 24, 2009 Share #9 Posted November 24, 2009 MOTORKOTE-?----- I had to say it guys! Link to comment Share on other sites More sharing options...
boominup Posted November 25, 2009 Share #10 Posted November 25, 2009 MOTORKOTE-?----- I had to say it guys! Motorcote won't fix a tire howl. Pour it on your tires and all you'll hear is the sound of sirens!! LOL! Link to comment Share on other sites More sharing options...
Cougar Posted November 25, 2009 Share #11 Posted November 25, 2009 Sometimes when going about 60 mph, I hear a high pitched sound coming from I-don't-know-where. caught me off guard I guess Link to comment Share on other sites More sharing options...
BoomerCPO Posted November 25, 2009 Share #12 Posted November 25, 2009 Sometimes when going about 60 mph, I hear a high pitched sound coming from I-don't-know-where. If yer going through a School Zone it could be a Police siren.... Boomer......who sez don't blame me I didn't post the Speed Limit . Link to comment Share on other sites More sharing options...
Cougar Posted November 25, 2009 Share #13 Posted November 25, 2009 OK, OK, BACK ON TOPIC.. Why do tires do this? Make that sound that atlm is talking about? Link to comment Share on other sites More sharing options...
Brake Pad Posted November 25, 2009 Share #14 Posted November 25, 2009 just thinking: you don't hear it going straight, but as your ear gets closer to the ground, you here the noise, and I guess you lean into your turns like most of us, and this portion of the tires, really don't get used enough. so you being off balance from your bike, you get to hear noises, you norally would not. I'd throw the bike down into the turns alittle harder, and keep you body in line with the bike It sounds like your coming out from behind the windsheild, and your Now hearing the tires do you have any chicken strip left? Link to comment Share on other sites More sharing options...
waterbug Posted November 25, 2009 Share #15 Posted November 25, 2009 My 404s did that and since I went to the E3s I dont hear it. The ride change is amazing for just one or two up, my better half could believe the ride change. I couldnt belive how much a tire can change the ride of the bike. Link to comment Share on other sites More sharing options...
big mike Posted November 25, 2009 Share #16 Posted November 25, 2009 D404's are not enough tire for the RSV. Don't worry, they won't last long. Then you can put on some Avons and you'll have a whole new bike! AMEN BROTHER AMEN!!!! Link to comment Share on other sites More sharing options...
boominup Posted November 26, 2009 Share #17 Posted November 26, 2009 OK, OK, BACK ON TOPIC.. Why do tires do this? Make that sound that atlm is talking about? When I changed out my 404s to E3s, I noticed that the treads were cupped along the edge of the contact patch. Leaning it into corners would make them scream like a real aggressive set of winter tires.. The noise seemed to have started suddenly...more so at higher speeds and getting worse at lower soeeds as the tires were wearing more. No more noise...E3s for me. Brian Link to comment Share on other sites More sharing options...
Cougar Posted November 26, 2009 Share #18 Posted November 26, 2009 So this happens because of the way a person rides then? (wear pattern), Or is it the way the tire is designed poorly? then happens later on in the tire life? Link to comment Share on other sites More sharing options...
boominup Posted November 27, 2009 Share #19 Posted November 27, 2009 So this happens because of the way a person rides then? (wear pattern), Or is it the way the tire is designed poorly? then happens later on in the tire life? If you do alot of high speed super slab driving, the center treads of the tires wear faster than the edges...leaving a cupped pattern on the inner edges of the outer treads. As you lean, this cupping is what makes the noise as it contacts the pavement. Some brands and models are more prone to cupping that others.. the E3 seems to wear better and without cupping for me so far. Just check out the differences in the design of the treads and you'll see what I mean. Brian Link to comment Share on other sites More sharing options...
N3FOL Posted November 27, 2009 Share #20 Posted November 27, 2009 That is pretty much most of my riding is...lots of high speed super slab riding. And I love doing it on the Venture! As far as tire noise is concerned, I also get that noise on the lean but that is only momentary...this I can live with it. So far, I have a little over 10K on the OEM tire and may exceed 11K. I've heard lots of good feedback on the Avons and Dunlop E3s and do not cupp as much or perhaps not at all. Ride safe all. Link to comment Share on other sites More sharing options...
boominup Posted November 29, 2009 Share #21 Posted November 29, 2009 My bike reacts completely differently with the E3s on especially in the twisties. Steering is much crisper snd it feels more sure footed and so far...no cupped treads because of the design of the tread and the stiffer sidewalls. I love them, not to say anything really bad about the 404s because when it was new it seemed to handle just fine for me. The road noise when leaning just started to really get to me so I switched them with many miles left on them. Brian Link to comment Share on other sites More sharing options...
crockettrider Posted November 30, 2009 Share #22 Posted November 30, 2009 On mine, it's the tires. A result of too many straight roads. A hundred miles in the mountains at it'll go away. I'll second that. Had an emergency road trip tire change and could only get a 404m (rear)......3200 miles later I had to buy new. Too light a tire for sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now