Jump to content

phochief

Expired Membership
 View Profile  See their activity

  • Posts

    40

  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Name
    David

location

  • Location
    Port St. Lucie, United States

Converted

  • City
    Port St. Lucie

Converted

  • Home Country
    United States

Converted

  • Interests
    Ham Radio
  • Bike Year and Model
    2009 Royal Star Venture
  1. phochief
    You guys are great! I think the consensus of replies has explained this very well and it's actually a normal part of the RSV. It could be described as a clunk or a click but since I haven't come across any other RSVs around here yet I just wanted to make sure it was ok the way it is. Last time I had a motorcycle was over 20 years ago and I finally got a Suzuki Burgman 650 scooter a couple years ago. It's a pretty cool machine (it will do 105mph!) and I still ride it occassionally, but the RSV is my baby now. On another related note....I had that darn chirp from the very beginning on this 2009 RSV and had the "I" basket installed about two weeks ago. The chirp is mostly gone now, so that's a good thing. At 4,000 miles I also switched to Rotella T synthetic. I love this bike! Thanks again, David
  2. phochief
    I've had my 09 RSV for about six months now and love it, but I'm not sure if I'm just not good at shifting or if there's some other problem. It seems like if I really rev up the engine right before shifting, and then quickly pull the clutch and twist down the throttle, it shifts pretty smoothly without any clanking noise. Putting it into 1st gear always clanks and even 2nd gear clanks a bit if I pull in the clutch and slowly shift into gear. 3rd also clanks a little if I pull the clutch and slowly shift into gear. It's like I need to rev the engine a split-second before shifting, not to get a clank. How much, if any "clank" or noise should I hear when shifting? I know some of you don't even use the clutch, but I'd rather use it. Can someone give me some pointers? Sorry to be such a newb. David
  3. phochief
    It's definitely on the left side.....I've also replaced the original coax lead with a new 18" factory one straight to the radio, and a new FireStick FireFly antenna. Receives great, transmit signal is fine but output audio is down. It's not terribly low, it's just not up where it should be. I don't want a "power mike" or anything that will overdrive the unit but the modulated audio could definitely use some tweaking. Thanks, David
  4. phochief
    Yes, I think that's the problem. I need to get back under the top box and pull the CB to get the model number. I found a post elsewhere that referred to adjusting the modulation on the Clarion radios, but there were different instructions for different models. The older units mod level was tuned with VR-201 and the newer units were tuned with VR-101 and VR-102 specifically: 1. Set Cb channel to CH-20 (27.205 MHz) 2. Connect low frequency oscillator to MIC-IN terminal or the DIN connector, and set the oscillator's output to 1kHz, 100mV. 3. Adjust VR102 so that the depth of modulation at this time 70% (Max Mod. CW=+) 4. Set the oscillator's output 1kHz, 10Mv. 5. Adjust VR103 so that the depth of modulation at this time becomes 50% (Mod. CCW=+). I definitely would not recommend anyone do this unless you have the knowledge and skills to make such adjustments to your radio. It would be very easy to mess up your radio -or- cause spurious harmonics if you overdrive it. David
  5. phochief
    Goose....thanks for the info. My wife and I use J&M HS-BCD279-UN Dual Mode headsets. I've tried both headsets with the same result. The mic is definitely aimed toward my mouth and touching my lips. The audio is very clear, just not very loud compared to the others in our group who are using Midland 75-822 handheld units. There was also a post on here awhile back from another venturerider member who reported the same problem with his CB. If yours is nice and loud, I wonder what kind of headset you're using? If I can find a Goldwinger who will let me plug his headset in for a test, that would be good too. There should be no relation between the IC and the CB's transmit audio output. I've been a ham radio operator for 30 years so I do have a pretty good working knowledge of communications. I've searched the web and it appears that the Gold Wings actually use the same (or similar) Clarion CB that the Venture does and some wingers have also reported the low level modulation. This may not be a problem that affects all RSV CB units, however, if I could get hold of the schematics I would like to increase the modulation level. Thanks, David
  6. phochief
    The other members in my riding group say the audio from my CB is a lot lower than everyone else. The audio is crisp and clear, but just not very loud. The receive audio is fine, it's just the transmit audio that doesn't have much punch. I have a 2009 RSV and have checked and double-checked all of the connectors and they're all good. I've also replaced the OEM antenna with a Firestick FireFly and the SWR is 1.2 to 1 and I have a good signal. I'd like to avoid taking the bike to Yamaha service until I absolutely have to. I'd rather fiix it myself. Has anyone found a solution to this problem. Have you tweeked the modulation pot on the Clarion circuit board? Does anyone have a schematic of the Clarion CB unit or can tell me the number of the modulation potentiometer on the board? Thanks guys, David K4ZZR
  7. phochief
    I've got the second one too (97841-1VGA) and it holds the RSV very securely. It's bolted to the floor of my garage and I ride it up on the chock whenever I want to check the oil. If I were going to do any real work to the bike I'd strap it down too, just for safety's sake. It's solidly constructed and for $80 you really can't go wrong. I've also got a Condor chock on my trailer, and I like it because it's easy to remove, but it was a LOT more expensive. David
  8. phochief
    Thanks for the extra info and in depth explanation. I added a ground loop filter to the audio system under the fairing a couple weeks ago. I'll have to check that. Otherwise, I checked my wife's mic and it's aiming correctly. I didn't mention that we're both wearing J&M headsets. I guess it just doesn't make a whole lot of sense to me. I have my Zumo attached to the audio system and can turn the MP3 music up or down with my volume control. I can turn the FM radio volume up or down with the volume control. I can turn the CB volume up or down with the volume control. I just can't turn the intercom volume up or down with the volume control. Thanks guys, David
  9. phochief
    Sorry if I'm beating a dead horse, but I just want to be sure about this. Is the only way you can adjust the intercom volume of your passenger, by using the IC setting on the audio head? You can't adjust the intercom volume by using the Volume control on the side of the audio head? Again, it just seems strange that the passenger can adjust how loud she hears the driver by using the passenger's volume control, but the driver can't adjust how loud he hears the passenger, except by going into the IC option? Thanks again, David
  10. phochief
    Thanks guys for the input....I already knew about selecting IC and adjusting the intercom volume, but after I do that, can I adjust the intercom volume by turning the volume control? She can turn her intercom up or down (from the passenger volume control knob), so it seems like I should be able to do the same thing. Doesn't seem quite fair that she can turn me down (literally). In other words, sometimes I can barely hear my wife and I need to turn the volume up so I can hear her, and sometime she's too loud and I need to turn it down. Right now the IC setting is at Max and she's not very loud and turning the volume control has zero effect. Thanks, David
  11. phochief
    Seems like I used to be able to adjust the intercom volume with the knob on the audio control box, but last time we road 2-up I couldn't turn the intercom up or down. I know there's an IC setting on the audio box, but isn't the intercom volume adjustable with the volume knob too? My wife can adjust how loud she hears me with her volume control on the passenger's seat, but for some reason I can't adjust mine. I'm running a Zumo GPS with MP3 and can adjust the volume to it and the radio fine. Also, all of the connectors under the fairing have already been pulled and dielectric applied. David
  12. phochief
    I sometimes have the hard shifting, banging gears and trouble getting my RSV into neutral, so would my solution be exactly the opposite -- make the rod a little longer? Or is there another way to make sure the clutch is fully engaging? David
  13. phochief
    Same here....just installed a Scorpio i900 on my 09 RSV. I especially like the perimeter alarm - keeps little hands from getting too close to my bike. Pretty easy to install, but you've got to figure where you want to put the main unit. I put mine under the passenger seat and it works great there. David
  14. phochief
    Right now I've got zero in the front and 25 in the rear. That's really wierd that you're 5'6" and can flat foot your RSV. Are you fully sitting on the seat? If I scoot forward on the seat I can flat foot it too, but I'd rather stay in a sitting position at the lights. Thanks for you input, David
  15. phochief
    Hmmm, if some of you guys who are shorter than me can flat foot your bike....then maybe it's the extra few inches of fat in my ass. This may be the final nudge I needed to go on that diet! David
×
×
  • Create New...