slowrollwv

Same here.

I installed a HID headlight 35W and 6000K and did the LED driving lights also ( truck lites ) from Kury. They are very bright and save a bunch on the charging system. BTW I only had a little over $220.00 for all three lights in this set up.

I have a shim tool I can lend. All I ask is that you return it when done. Send me your address in a PM and I will get it to you

I don't think the helmet would do them any good if they cut the strap on the d-ring. But they could cut it just to be A$$ holes though.

Wv has that law. I would not ride without one but that is by choice. What the rest of the people do is there choice, but it is the law here that all wear a helmet. I had two crashes a long time ago that split my helmets wide open, I would not have survived the first one without a helmet.

When we were shooting 3D we use to step off course and pick a trick shot. Then all in the group tried to follow. A lot of arrows got broke doing that. When we shot indoors we played SLAM! One would shoot and everybody on the line would try to hit his knock.

You ante just whistling Dixie there. I use to shoot tournament archery in the mid 80's. Every time I went to our club to practice I would shoot against four State champions that belong to the club.

Happy Birthday Don. Hope you have a great one.

The parts on my son's Honda looked like that. We took it apart , sanded them and polished them ( they look like chrome) then used a good hi temp clear coat to finish the job.

The wheel may be a direct drop in and the rotors may bolt to a Strat wheel but I would look awful close at the clearance of the fender before I would try to fit any other wheel on a 99 to 2013 Venture. I don't see enough room for anything in there.

A friend was having trouble getting his leg down to use the rear brake on his Goldwing due to a previous accident. He ask if I could do something to help. This is what I came up with. http://s253.beta.photobucket.com/user/slowrollwv/media/IMG102_zpsb0a7bc1a.jpg.html?sort=3&o=0 http://s253.beta.photobucket.com/user/slowrollwv/media/IMG101_zps7a562cae.jpg.html?sort=3&o=1

Not a lot you can do about short people. Maybe get a booster seat for the back. I am 5' 10" my wife is 5'2" but I don't have that problem cause she is always asleep.

Most people set the front bolt in place then lower the bottom rail to run along the bottom of the saddle bag and drill a new hole in the fender rail. You might want to check the width on the back part of the rail sometimes they get bent in shipping.

I did a custom brake peddle for a friend a couple weeks ago. Went to Lowes to get a few chrome acorn nuts. Nothing?? they had them in 1/4" but nothing bigger What a place.

The gauge pods were made by Tripmasters and when he passed away the business went under. His wife sold all of his parts and stock to the Venturers. That is the story I was told when I got my pod from them.

I don't know, never stopped at one.

Funds sent. Hang in there Paul and get well soon.

A friend of mine on another forum had three sets of Avons to crack. Avon replaced them but told him that this was the last set they would replace. They ended up sending him a set from a different tire maker to get it straitened out

You can keep it. We haven't had any to worry about yet. Most we got was about four inches, then it has been 1" at a time.:cool10: I can live with that.

I would have to say the HID headlight and the KURY Phase 6 LED driving lights. Saved a bunch on the charging system. The extra lights I put on the back doesn't hurt anything either. 4 tail lights, 6 brake lights, and 4 turn signals. I think I will be seen, except for the IDIOTS that just don't give a damn.

I don't blame you for not wanting to go through Chicago. The first time I went to WY. I was driving when we hit there. First and last time I will go there. I am just north of Martinsburg. We could meet up for the ride out to the:cool10: Rally.

If you get it at 3k and put a $2,500.00 paint job on it you are just at KBB. But it.

Winston I would not use the Green slime. That stuff is a PITA when you have to change the tire, And some places refuse to work on tires with it in them. It will not do a thing for the balance of the tire.

I am not sure of the mounting bracket, but if you let my know the length of the arm pads I have a few sets of pads left from the arm rests that I made for the 2nd Gen.

Flanders bars.