Zfrebird4 Posted December 18, 2009 Share #251 Posted December 18, 2009 ... have him make a pattern for us 1 st Gen folks. Thanks. JackZ Link to comment Share on other sites More sharing options...
WilCruise Posted December 18, 2009 Share #252 Posted December 18, 2009 Got 'em - they look great - thanks! Link to comment Share on other sites More sharing options...
1BigDog Posted December 18, 2009 Author Share #253 Posted December 18, 2009 ... have him make a pattern for us 1 st Gen folks. Thanks. JackZ We talked about that...we need a 1st gen to look over..any volunteers?? Link to comment Share on other sites More sharing options...
1BigDog Posted December 19, 2009 Author Share #254 Posted December 19, 2009 Ok folks. We have shipped out all of the ready deflectors today. We will resume shipping after the Christmas rush. Its way too risky trying to ship during the busy Christmas week. I believe there are 10 sets left in this run. We will keep you up to date once we resume shipping. Thanks to all who have ordered for your patience with this. And have a great Christmas!! Ruffy & Dan Link to comment Share on other sites More sharing options...
massey130 Posted December 22, 2009 Share #255 Posted December 22, 2009 Wow, what nice deflectors. these are simply great. i need polishing lessons fer sur. I am very thankful to both of you for getting my order out just under the wire as they arrived today. the weather is predicted nice over the weekend, so i may get these mounted after i get the back tire on. i would hate to see the price once these become so poplular they appear on eBay. if there is a testimonial page, i wanna post! thanks again, guys. Link to comment Share on other sites More sharing options...
1BigDog Posted January 20, 2010 Author Share #256 Posted January 20, 2010 Dan has begun working on the last sets of the second run. If all goes well there should be another 9 or 10 sets left to complete this run. You will be notified once the sets are ready to ship. Havent forgotten about you ArticusMedicus. Dans PC is up again....... Give it about a week or so. If everyone takes their order that means we will have 5 orders left over. We would still need another 15 orders to start a third run. Hang in there.... Link to comment Share on other sites More sharing options...
1BigDog Posted January 21, 2010 Author Share #257 Posted January 21, 2010 (edited) To the following listed below: your sets are ready to ship. A PM has been sent. Thanks!! 16: ArticusMedicus Michigan ***notified 1/21/10 24: Craigatcsi Nebraska ***notified 1/21/10 26: FutureVentures Ill notified 1/21/10 PD shipping 1/22/10 27: straycatt Mich ***notified 1/21/10 PD shipping 1/22/10 28: JerryT MO *** notified 1/21/10 PD shipping 1/22/10 29: Seawolf NY *** notified 1/21/10 PD shipping 1/23/10 Edited January 22, 2010 by Ruffy Link to comment Share on other sites More sharing options...
straycatt Posted January 22, 2010 Share #258 Posted January 22, 2010 I don't have any thing constructive to add........I'm just really happy to see my name on this list Link to comment Share on other sites More sharing options...
1BigDog Posted January 24, 2010 Author Share #259 Posted January 24, 2010 [The following sets have shipped today..... 24: Craigatcsi Nebraska *** 26: FutureVentures Ill 27: straycatt Mich *** 28: JerryT MO *** 29: Seawolf NY *** Thanks guys!!!! We either have 4 or 5 sets left to polish so we might just make it down to Canuck or midnite. Should have the rest ready by next weekend. Link to comment Share on other sites More sharing options...
straycatt Posted January 26, 2010 Share #260 Posted January 26, 2010 When I got home today, the wife had been to the post office (we don't have mailboxes out front, gotta go to town for mail) and there sat my box with, hopefully, some aluminum inside. Opened the box and, sure enough, aluminum. Well, aluminum and packing peanuts. At least I assumed it was aluminum. Between the peanuts, the bubble wrap and then under that, the nice thick paper towel taped to the pieces I couldn't be sure what it was. I did know that it had the vague shape of what I was waiting for..... And then I got side tracked for a while, fighting the dogs for the packing peanuts before they scattered the crazy thing all over the house......guess who won. About halfway through this party the noise brought the Wicked Witch of the North downstairs to see what all the commotion was about......that led to a discussion of what did you get and why in the hell are you buying motorcycle parts in January. Because it's my money and I'll buy whatever I want with it finally sorta' ended that side show, and after almost 20 minutes I got to check out my goodies. :mo money: Wow, was I impressed. Great workmanship, good heavy material, and not only was the packing sufficient to stop anything short of a direct nuclear strike, my critters enjoyed it immensely. Nice work Ruffy, thank you. Now, if I can just resist the urge to have them powder coated to match my bike I'll be all set. Link to comment Share on other sites More sharing options...
ArticusMedicus Posted February 3, 2010 Share #261 Posted February 3, 2010 Ruffy, I'm going to have to formally bow out. I guess it just wasn't meant to be. All this Hope and Change has got me spread so thin my pay check are transparent. I have been renting a car for two months (out of pocket, ins only covers $600) while the Body Shop tries to get my car done... fell asleep at the wheel on the Highway, making my way home from work about three weeks be for Christmas... And he still ain't done with it. So, the next guy in line will be tickled with my misfortune. Link to comment Share on other sites More sharing options...
1BigDog Posted February 3, 2010 Author Share #262 Posted February 3, 2010 (edited) Sent you a PM Art. The next 4 listed, your sets are ready to ship. PM's were sent. :smile5: 30: Spingley IND 31: Trimster Utah 32: Canuck Canada...(hold) 33: midnite TN If those listed above all take their sets ill have one set left over and 4 names left. Next on the list wants 2 sets. Ill have to check with her to see if she still wants them, otherwise this will complete the second production run. I currently have a few names left over for a third run. Yamamom1 Canada Delphi Forum Sallys dad KS Pete Kadish AWSMSRV WA. Short Haul TX Thats 5 names. We need at least another 15 orders to start another run. Let me know if there is any more interest. And thank you all for your orders. We hope you all enjoy them. Ruffy Edited February 3, 2010 by Ruffy Link to comment Share on other sites More sharing options...
1BigDog Posted February 10, 2010 Author Share #263 Posted February 10, 2010 Spingley IND Canuck Canada midnite TN Your sets shipped Tuesday. Sorry for the delay but theyre finally out. Yamamamom cancelled her order so: Sallys dad and Pete Kadish, you have PM's. Link to comment Share on other sites More sharing options...
petekadish Posted February 10, 2010 Share #264 Posted February 10, 2010 Thank you so much! I can't wait to put them on. Be Safe! Pete. Link to comment Share on other sites More sharing options...
sallys dad Posted February 11, 2010 Share #265 Posted February 11, 2010 Paypal sent last night. Thanks, Ruffy. Link to comment Share on other sites More sharing options...
1BigDog Posted February 11, 2010 Author Share #266 Posted February 11, 2010 Well, thats all folks..... sallys dad and Pete Kadish got the last sets. Right now we have 3 names left over. We would need another 17 orders to make a third run. Otherwise..........thanks to all who have ordered a set (or two). About 58 sets were made and sold. Dan and I never thought it would have gotten so big. What we thought would have been a few sets turned into a 10 month project. I think Dan lost about 200 lbs in sweat equity.... He can now also rob a bank since he sanded off all of his fingerprints..... Link to comment Share on other sites More sharing options...
Aussie Annie Posted February 11, 2010 Share #267 Posted February 11, 2010 :clap2::clap2:You both did an amazing job. We all thank you very much Link to comment Share on other sites More sharing options...
LilBeaver Posted February 11, 2010 Share #268 Posted February 11, 2010 :clap2::clap2:You both did an amazing job. We all thank you very much :thumbsup2: Link to comment Share on other sites More sharing options...
straycatt Posted February 12, 2010 Share #269 Posted February 12, 2010 Agreed, thanks Ruffy. As much as I appreciate the effort it took to polish these things........mine are out for powder coating and should be done any day now. I'll post up some pics when they're done. Link to comment Share on other sites More sharing options...
midnite Posted February 12, 2010 Share #270 Posted February 12, 2010 Got mine today:big-grin-emoticon:. Shiny:banana: will look good on the bike, but will have to wait. Way tooo cold out there.:bawling:Thanks for a great job. And all the sweat equity. Link to comment Share on other sites More sharing options...
jlh3rd Posted February 12, 2010 Share #271 Posted February 12, 2010 ruffy add my name to your current list...would like a pair.. Link to comment Share on other sites More sharing options...
The Black Pearl Posted February 12, 2010 Share #272 Posted February 12, 2010 Hey Ruffy put me down for a set!! anyone got a set of the stock ones? my bike came with them removed because someone installed a aftermarket turn signal bar but I have now done the passing lamps and would really like the extra air defense Link to comment Share on other sites More sharing options...
1BigDog Posted February 12, 2010 Author Share #273 Posted February 12, 2010 Agreed, thanks Ruffy. As much as I appreciate the effort it took to polish these things........mine are out for powder coating and should be done any day now. I'll post up some pics when they're done. Id like to see what they look like powdercoated. I had priced getting them chromed but for a single set they wanted 165.00 and for 5 sets it would have been 135.00 a set. Thats not counting the original cost of the deflector. Would have priced them well over 200.00 Got mine today:big-grin-emoticon:. Shiny:banana: will look good on the bike, but will have to wait. Way tooo cold out there.:bawling:Thanks for a great job. And all the sweat equity. Make sure you keep them wrapped up so they dont get scratched. ruffy add my name to your current list...would like a pair.. Hey Ruffy put me down for a set!! anyone got a set of the stock ones? my bike came with them removed because someone installed a aftermarket turn signal bar but I have now done the passing lamps and would really like the extra air defense Ill start another list. Right now that makes 5, still need 15 more. Thanks again guys....and thanks to the lone stranger who did that sneaky thing.... Link to comment Share on other sites More sharing options...
straycatt Posted February 24, 2010 Share #274 Posted February 24, 2010 Finally got my lowers back from powder coating, Ruffy. The first time they were done I refused them, they had some pretty obvious debris in the finish. The second time they were great. $45 total, but I do a fair amount of business with this shop. Normally they have a $75 minimum. The color is a pretty good match but not perfect. We must have went through fifty paint samples before we found a close match. I really like it. Link to comment Share on other sites More sharing options...
short-haul Posted February 24, 2010 Share #275 Posted February 24, 2010 could you post a list so we know if were on it I think you have me down:nanner: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now