Everette
-
Posts
65 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Everything posted by Everette
-
I need a kickstand for a 03 RSV Thanks Everette
-
I want to thank everyone who helped me with this problem. Main problem was finding time to look at it. It was a very simple problem. There is a piece that hangs off the frame that has a hole in it. A nipple on the caliper bracket fits through the hole and just hang there. When they changed my tire the part that hangs was twisted a bit when they cranked down on the bolt and this put a bind on the caliper bracket. I could not see it until I had the bike on the jack and was under it looking up at everything. Just took a ride and everything works great. I really do appreciate all the suggestions and help. Thanks Everette
-
I made the decision to pull the rear tire. I will check the splines and drive pins. While on the stand it does not make the noise it does when on the ground. I will let you know what I find. Thanks Everette
-
I got a set thanks. Everything seems to be put togeather ok. Just rubs very badly when backing up and cool. Does not rub when going fwd or when warm backing up. Any ideas. Thanks Everette
-
Sorry, should have said 03 Venture. It looks like the bushing is going the right way. It really feels like and sounds like the brake is rubbing. Thanks Everette
-
I’ve got a problem. I put the barons lowering kit on a couple of months ago and it has worked fine. The problem is that I had the back tire changed the other day and I experience a rubbing noise when I back up. It is really loud. It does not happen when going forward. It appears to be coming from the brake. I can’t tell if everything was put back on in the correct order. I cannot find my instructions. I need help because everything needs to go in a certain order and I can’t remember how it goes. Can anyone send me the instructions? Thanks Everette
-
KiteSquid, I placed an order with eautoworks and have not heard a word form them at all. No confirmation or anything. Paid by paypal. Thinking about canceling my order. Everette
-
BULB Thanks Everette
-
I did double check the connections. I'm hoping it is the bulb, even if it does look good. I don't see anything wrong. The light comes on and it actually looks bright, but the brake light does not work. The harley fixture works and I have a LED light attached to the bottom of my trunk and it works also. I left my meter at work, so I don't have one here. Thanks for the reply.
-
I installed the Harley light fixture to my Venture yesterday and it works great and looks great. But my main brake light does not work now. I checked the bulb and it looks ok and I checked the wiring and every thing is wired correctly. I’m going to get a new bulb later today, but was wondering if anyone has any idea’s. Thanks, Everette
-
OK, It appears I have a bad gage. My front tire was at 29psi. Just bumped it up to 36. The back tire is and was at 40psi. Hopefully this is the problem. Hopefully. Thanks Everette
-
Maybe a death grip was overstatement, but there was definently a wobble in the curves. Like I said I never felt out of control, but could feel the wobble if I had a light touch on the handle bars. Everette
-
This might not be the place to post this, but here goes. My venture is a 03 and the rear tire was replaced at 8000 miles by the previous owner. I have only had the bike for a couple of months. I was in the mountains of North Georgia yesterday and noticed a wobble when I was in a tight curve which was most of the time. It was very noticable. I never felt like I was going down but if I did not have a near death grip on the handle bars the wobble would be there. I guess I'm thinking I should go to the Avon front tire, that this may cure the problem. Any Ideas? Thanks, Everette
-
Another lowering front end question
Everette replied to Everette's topic in Royal Star Venture Tech Talk ('99 - '13)
No kit, http://www.venturerider.org/forum/showthread.php?t=939&highlight=lower+front http://forums.delphiforums.com/n/main.asp?webtag=vrider&msg=4807.1 Everette -
What is the determining factor for the amount you can lower the front end. I have read 1 inch and I have read 1.5 inch. I just lowered my bike 1" and all seems well, but I'm still just a little off from being able to stand flat footed. Thanks Everette