Jump to content

Flyinfool

Expired Membership
 View Profile  See their activity

  • Posts

    13,152

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by Flyinfool

  1. Flyinfool
    I have an old computer in the closet that is just a home server with a 2Tb drive in it. That drive is formatted with 2 partitions. one partition is very small and has just enough space for the operating system and installed programs to make that computer functional. Then on all of the other computers in the house that actually get used, I have a mapped drive to that monster drive. that is where all of the shared data lives. I also have an external 2T backup on there.
  2. Flyinfool
    There may be another way, but I have to go to analog audio, then bring that into my computer with a little box that plugs into a USB on computer, then do the conversion to MP3, then move the MP3 to my player. But i do not have a digital anything in my AV system.
  3. Flyinfool
    Be very careful tightening the valve cover bolts. They are shoulder bolts and if over tightened WILL snap off in the head. Do not tighten them past the recommended torque (10Nm - 7.2 ft lb).
  4. Flyinfool
    girl
  5. Flyinfool
    Marks was the only one that I knew of for sure making one. I thought I heard of someone else that either was, or was thinking about making one. Hopefully Dingy will chime in here, he has done a lot of research on this and has knowledge and pics of everything....... Since the V-max is also the same motor, I wonder if you could adapt its exhaust to a Venture????? There have been a few that have rebuilt their collector by welding in 6 new nipples. The can part is not usually what goes, it is the nipples that rust off. to get everything lined up right you may have to install the can and pipes wit the new nipples in them to tack weld everything then remove, weld reinstall. If you can not get 316 or better stainless for the nipples, then you may want to paint the whole collector with BBQ or stove paint to keep the rust down. Don't forget to use a stainless filler rod while welding. Don't laugh, I have seen it often where SS parts were welded and all the welds rusted. There are some threads somewhere on here with pics.
  6. Flyinfool
    Geeeze Don, Don't be scarin us like that. There's already more than enough of us with flaky tickers running around here. Study good for them tests, you want to pass them with flying colors.
  7. Flyinfool
    You can only die once.
  8. Flyinfool
    It is back tonight but was down last night from 6:00 till 9:00 when I gave up.
  9. Flyinfool
    Unfortunately for me I can relate to a few of those.
  10. Flyinfool
    By By
  11. Flyinfool
    Dive Bomber
  12. Flyinfool
    Fair
  13. Flyinfool
    foozzball
  14. Flyinfool

    Why?

    Flyinfool replied to mraf's topic in Watering Hole

    Why do threads like this continue?
  15. Flyinfool
    Justice
  16. Flyinfool
    I can not quite see in the pics, does it say 1300 on the engine side covers?
  17. Flyinfool
    tri
  18. Flyinfool
    Fokker
  19. Flyinfool
    baron
  20. Flyinfool
    Looks nice, But an 86 should not have a 1200 engine, it should be a 1300.
  21. Flyinfool
    Where did chat go? I tried both the direct link and the tab up above.
  22. Flyinfool
    Before you spend any money on parts, tear this one down. That way IF you are looking at a whole engine replacement you will not be left with a pile of new parts.
  23. Flyinfool
    take off
  24. Flyinfool
    airplane
  25. Flyinfool
    Y....................YE....................YE..............resisting,,,,,,,,,,, its hard to resist. Resistance may be futile............Ye........
×
×
  • Create New...