foxman Posted August 24, 2008 Share #1 Posted August 24, 2008 I'm going to buy a new sync tool and I can't decide if I want a SycnPro or a four gauge system. Please send out some opinions of both. Thanks. Link to comment Share on other sites More sharing options...
BradT Posted August 24, 2008 Share #2 Posted August 24, 2008 Only ever used the Carbtune and I am completely happy with it. Easy to work with Brad Link to comment Share on other sites More sharing options...
foxman Posted August 24, 2008 Author Share #3 Posted August 24, 2008 bump Link to comment Share on other sites More sharing options...
Steve S Posted August 24, 2008 Share #4 Posted August 24, 2008 Only ever used the Carbtune and I am completely happy with it. Easy to work with Brad What he said... Link to comment Share on other sites More sharing options...
Squeeze Posted August 24, 2008 Share #5 Posted August 24, 2008 I've worked with a 4-Gauge System and Carbtune. I found the Carb Tune not that accurat and very much like my 4-Gauge System. Just check the indivudual Gauges or Columns by hooking them all toghter on a single Port at Idle and adjust the Channels to show the same Value. Then rise the RpM and check again. Link to comment Share on other sites More sharing options...
foxman Posted August 24, 2008 Author Share #6 Posted August 24, 2008 bump Link to comment Share on other sites More sharing options...
rek58 Posted August 24, 2008 Share #7 Posted August 24, 2008 I'll throw my vote to the Carbtune. It's done ok by me. Link to comment Share on other sites More sharing options...
V7Goose Posted August 24, 2008 Share #8 Posted August 24, 2008 I'm partial to the four gauges. I have used several CarbTunes, including one that was brand new, and I really dislike how much they seem to stick. I don't trust 'em much. But I am in the minority. Goose Link to comment Share on other sites More sharing options...
Floyd Posted August 24, 2008 Share #9 Posted August 24, 2008 I'm partial to the four gauges. I have used several CarbTunes, including one that was brand new, and I really dislike how much they seem to stick. I don't trust 'em much. But I am in the minority. Goose Like you, I didn't like how they stuck. I had to move them to different angles to get them to move freely. I'm hoping to find something better. Link to comment Share on other sites More sharing options...
Freebird Posted August 24, 2008 Share #10 Posted August 24, 2008 Kent and Floyd, which gauge brand do you use? I am happy with my Carbtune but wouldn't mind comparing it to some gauges. Link to comment Share on other sites More sharing options...
Floyd Posted August 24, 2008 Share #11 Posted August 24, 2008 Kent and Floyd, which gauge brand do you use? I am happy with my Carbtune but wouldn't mind comparing it to some gauges. I was using the Carbtune II until I noticed the sticking rod issue. Link to comment Share on other sites More sharing options...
V7Goose Posted August 24, 2008 Share #12 Posted August 24, 2008 I use the gauges sold by JC Whitney. Link to comment Share on other sites More sharing options...
AKRefugee Posted August 25, 2008 Share #13 Posted August 25, 2008 What's the best sync tool? Oh Oh :backinmyday: I know this one! It the one you actually use and not let rot on the shelf in the garage! Link to comment Share on other sites More sharing options...
MasterGuns Posted August 25, 2008 Share #14 Posted August 25, 2008 The Carbtune is by far the best sychronization tool this dude has every had. When not in use, keep it in a plastic bag or some other device for keeping it clean and you'll never have the sticking issue. I've had mine now for several years, use it regularily on my bikes and others, and works excellently every time. Link to comment Share on other sites More sharing options...
KiteSquid Posted August 25, 2008 Share #15 Posted August 25, 2008 The best is a Mercury Manometer, but IIRC the EPA has made them illegal to sell in the US..... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now