Search the Community
Showing results for tags 'blinkers'.
Found 8 results
-
my rear blinkers are not flashing. the front ones work fine. when i use the blinker either to left or right my brake light flashes and the blinkers dont ??? whats the problem and where do i start? thanks in advance steve
-
I have 3 questions. Is there a way to make my back blinkers stay on all the time like the front blinkers do. I also have a lighted spoiler on my trunk. I would like to know if there is a way to make that blink, with my blinkers. Also is there a way to make led light in the spoiler and the brake light flash when I apply the brake. Any help would be appreciated. Ironhead
-
I am installing OEM passing lamps on a 2006 RSV. Everything had been going great. I am at the point where I mount the lamps to the bike and begin connecting the wires from the blinkers to the connections inside the faring. To my delight after I hooked up the left blinker - Black, Chocolate, and blue - then the right blinker, Black, Dark Green, and blue, to the wires inside the faring both blinkers worked, and the head light, high and low beam worked. I did not like the way I had brought a few of the wires into the faring so I disconnected the black wire, from the right blinker, and moved it around the mount bracket, and plugged it back in. I turned my bike on and now my head light will not come on and the lights on my dash board will not come on either but my blinkers work. Here is what I have checked; 1) Every fuse on the bike - none blown 2) Pulled the head lamp bulb out - still good 3) Disonnected all wires coming from the blinkers to the wires in the faring and made sure all connections were good. - still no head light I am at a loss. Any help would be much appreciated!
-
Greeting all! I am having an intermitant problem with my turn signals. They do not work most of the time. After about a 45 minute rid, they will start to work. I have taken the switch apart and cleaned with contact cleaner. The hazard switch has been removed, sprayed with contact cleaner and replaced. These function the same as the blinkers. They work as running lights, just no blinker. I also sprayed down the connector for the blinkers. Could it be the realay? I use turn signals ALL the time, even if no traffic around. This is just a habit I got into. Thanks for any suggestions. Dave
-
I replaced my broken speedo cable, the good part is that I can now see how fast i am not going and the odometer works again ass well. Unfortunately the self cancel feature on the blinkers which used to work, does not! Any thoughts?? -
Hey gang... Looking to replace regular bulbs with LED's... What base do the front blinkers use? I found a good thread but it says unknown for the front blinkers. I'm looking at these: http://www.customdynamics.com/motorcycle_led_bulbs.htm#Genesis_LED_Clusters_ but don't know which ones to use. I'm going to get dynamic clusters for the rear, the tail light LED cluster, and the running bar with blinkers I've seen everyone posting about. rs
-
1999 RSV How does a guy make the rear blinkers act as another running light on these things? Thanks for any help. Ross -
Craig and I hooked up the wiring for my new piggybacker on a 2002 midnight 2nd GEN. and everything worked right but the 4 way flashers. we used a 5-wire to a 4-wire hookup. I did hook the ground directly to the battery and not the ground wire to blinkers and taillight. Does anyone have any ideas on how to fix this? If so would you email me what it would take to fix the problem. kj4v@bellsouth.net ......Ken
.thumb.jpg.cd6eae28d93e1a05097461e2f91728ca.jpg)
