Freebird

Yamaha calls them protectors. Look at items 41 and 42 in this parts diagram at Partzilla. https://www.partzilla.com/catalog/yamaha/motorcycle/2009/royal-star-venture-s-xvz13tfsy/cowling-1

I've had a fairly brutal workload this week and not much time to mess with the bike. I had a short day today though. Had a stairlift install first thing this morning and got home around 2:30 to find that my ROX Risers were here. Fantastic. Saddlebag lid guards and lower wind deflectors should be here anytime but I'm OK for riding now. It took about 15 minutes to install the risers and get them adjusted to where I think I will like them. What an amazing difference. I should be good to go now in regards to comfort. Utopia backrest, Longhorn offset highway pegs, and ROX risers are all installed. The bike feels absolutely amazing now. Can't wait to get it out on the road. Thinking about doing another iron butt. Anybody in or around NE Ohio that wants to join me? I've done a 1,000 miler and a 1,500 miler (Saddlesore and Butt Burner) and am open to doing either one again. I did the 1,000 by myself and had company on the 1500. Weather, if we can avoid the rain, is getting nice for a long ride.

Those are stock deflectors that come on every RSV. Apparently, yours were removed. You have to split the fairing to get to the mounting points.

The luggage rack design is fine on the top side. The top brackets are wide enough and are solid between each mounting screw. The underside may benefit from some flat straps between the holes. Would be easy enough to make. Just a couple 6 or 8" pieces of flat strap aluminum or SS and drill holes in each end. I will probably do that at some point. I don't know why the load rating is so low. This trunk does seem stronger than the one on the RSV and the First Gens. I'm taking a bit different approach on this bike. My last bike had pretty much every piece of chrome that was available from Yamaha and the aftermarket. I've pretty much reached the decision that I'm going to limit myself to items that I feel are really needed this time for either comfort, utilization, or safety. At first, I looked around for any new chrome goodies for it but the forks are black and the Yamaha trunk rack is black so I decided to just stick with that theme. I bought black offset highway pegs and installed the Yamaha rack. I have the Yamaha black saddlebag lid protectors ordered. I never cared much for the black trim on vehicles nor even the color-coded "monochrome look that some cars used. The black on this bike is starting to grow on me though. I kind of like the departure from my usual. The only thing I'm awaiting arrival on are the handlebar risers, lid protectors, and lower wind deflectors. Kuryakyn black mesh type cup holder is ordered but is back-ordered until sometime in October. Sebel horns that were kindly sent by another member here arrived yesterday. Will look at installing one or both of them over the next few days if I ever get caught up on Stairlift installs. It has been a very busy couple of weeks for that. I had a large custom curved install last Saturday and then this week I've had and have installs every day of the week including possibly Saturday if they decide to move ahead with that one. I've had very little time to play with the bike.

I deleted it and he is one of the very few that I have actually banned from this forum over the past many years. I'm sorry it turned out that way but when he came back and started deleting his posts, it made a lot of other good posts submitted by others useless as there was no context to them. I hope he finds what he is looking for.

Installed the luggage rach last night. Very nice that Yamaha marked the location where you were supposed to drill the holes. Made it very simple to install. I usually measure many times before I start drilling because it's hard to "un-drill" a hole. The lid construction is certainly different from any other bikes I've ever owned. If you haven't installed a rack or look at the lid, it is a double lid construction. There are 24 screws I think that hold the top (painted) skin of the lid onto the base of the lid. You remove those screws and lift the top lid off and there are 4 tiny "x" marks molded into the bottom side of the top lid. That is where you drill the holes. Very simple. They call for drilling a 1/8" pilot hole and then a 10mm hole for the bolts. I didn't have a 10mm bit but used did have a 25/64" bit which is the fractional equivalent. That worked fine. It does surprise me that they list something like 4.4 lbs. for the maximum load on the rack. I think the RSV was 10 lbs. I'm sure I exceeded that many times and never had any issues with it. This lid seems much stronger than the one on the RSV.

Due to the fact that American edited and deleted all the content of his posts, I have deleted the threads the responses because they made no sense without the content of the original posts.

I will absolutely NOT be removing it at any time. It is what it is. When I buy something, it's to use the way I want to use it. If I have to suffer any negative consequences, so be it.

It could I suppose. I've never had an issue but it could happen. They would have to prove cause and effect. It's a chance that you take though. I think every bike made has a disclaimer about towing trailers.

I can't answer your question but I can tell you that I will not be changing mine every 8,000 miles. I may do so at 8,000 to 10,000 the first time and after that, I will run it until I feel some indication that I need to check them.

I got 41.9 riding mine home when I bought it. Right at a 300-mile ride. I was in tour mode but it really wouldn't have made any difference because there was no stop and go as it was all Freeway. Due to the break-in, I varied the speed between 65 and 75. Now, as for those readings. I haven't checked them by manually calculating but I am hearing that just like most all Yamahas and motorcycles in general, these speedometers read high. Probably around 6 - 8 percent. On the RSV, the odometer also read high but not by quiet as much percentage. So we may be geting slightly less MPG than we are calculating. I haven't confirmed the speedometer error but will do so soon. I'm surprised that it is off because the speedometer and GPS on my '18 read pretty much exactly the same. People who have checked it say that the GPS and Speedometer both have the same error built in. The only way to confirm it will be with my stand alone GPS or my iPhone SpeedBox app. I will do it a couple of different ways.

Tires are like motor oil. You won't find any total agreement on what to use. Many of us here will absolutely not use Metzler tires. There have been several cases of them chunking rubber when used on these bikes. Not sure why that is unless they just can't take the weights that we put on them. Dunlop E3 and Michelin Commanders seem to be the most popular among this group though several have reported good results with Shinko also.

I just can't imagine the plugs really needing to be changed every 8,000 miles. I may change them at 8,000 the first time but if they look good, I will likely go longer after that. At least 12,000 - 15,000. No, I haven't yet pulled the tank but if you look at my trailer hitch install thread, you'll see that I pulled darn near everything else.

Well, it took a lot longer than I anticipated but I finally got the hitch installed and the bike put back together. Somehow I managed to use all the parts that I took off of it and there were a lot of them. Man....all these gadgets are nice until you start having to unplug all those wires just to remove the trunk and rear fender. Hitchdoc makes a very robust hitch. I removed a Hitchdoc form an RSV once and swore I would never do it again. They were the only ones I found that is making a receiver hitch at this time though. Had I known how much work it was going to be, I would have considered a non-receiver type hitch if it would have made it easier. Anyway, it is done and I have absolutely no intention of ever removing it. I would take a torch and cut it off first.

At first glance, this looked like a simple enough project. Uh....not so much.

I'm off to a good start this morning. Utopia backrest is installed. Highway pegs are installed. The highway pegs are a KuryAkyn knockoff They were about $100.00 cheaper than the KuryAkyns but the main reason I went with them was because I have decided to go with mostly black on this bike and KuryAkyn doesn't offer the black version for the 1" bars. Will start installing the hitch here in a few minutes. Cold and rainy outside today. Sure would like to try out the new backrest.

My goodies are starting to arrive now. Hitchdoc trailer hitch got here on Thursday. Utopia backrest and the highway pegs arrived today. I've been slammed with work but will finally have time to get it all installed tomorrow. I had a big stairlift install today but have nothing to do tomorrow. It rained all day today and is supposed to be more of the same tomorrow so I should have plenty of garage time. Luggage rack, lower wind deflectors, and saddle top guards should all get here sometime this week. I've got to make a pattern for a tank bib, probably with integrated whale tale tank chap, and get it off to Nancy at Ace High Leathers. Think I'm going to go with the Stingray leather this time. Really like the one that she donated as a price for Maintenance Day. Attached picture is the one that she donated. It is for the Second Gen Venture and she has no patterns for the '18 yet so I'll have to be the helper on this one. I think I'll likely want a pocket on mine though.

Fantastic to hear that they can take that much of a fall with no damage. Not that I'll ever drop MINE of course.

Yes, after exploring the links you posted, I realized that I don't need it anyway.

Absolutely. I know of more than one rider who got hefty tickets for riding the shoulders in those cases. I know of one local guy here who got stuck with a $160.00 fine. Be very careful doing that in the USA.

Thanks. The dealer had loaded the latest software and my system is working very well. I got the instruction credit card looking thing with the activation number on it. I just didn't get any kind of thumb drive like I have seen some here mention. I guess I don't need it and will just need a thumb drive when I need to install another update.

Thank you. I'll find it if he doesn't see this and post a link.

Yes, mine is set up and working fine. I'm just trying to help another new owner and I have no experience with it because mine was done already.

Got this message from another new owner of the Star Venture. The dealer had my navigation and etc. all set up when I picked up the bike so I have no experience with this. Can anybody here help? Hi Don. I brought my new Venture TC home yesterday. Today I was trying to activate the Navigation by following the instructions on that card. When I try to press on the Navigation button after I insert the flash drive, the button does not do anything. Did you run into issues when you where setting up your Navigation, or am I somehow doing this wrong?

Where is this Toolbox that you all talk about. My bike has the latest updates and I've had absolutely no problems with the system but the dealer had it all done when I picked up the bike. I don't have any type of USB stick or anything else. Should I have a USB stick with Toolbox software on it or is Toolbox built into the system?