cowpuc

HAPPY 2019 NEW YEAR TO ALL!!!!!!!!!! WE DID IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! HOT DOGS FOR EVERYONE!!!!!! :group cheers::group cheers::group cheers::group cheers::group cheers::group cheers::group cheers: :ice_congrats-vi6886:ice_congrats-vi6886:ice_congrats-vi6886:ice_congrats-vi6886:ice_congrats-vi6886:ice_congrats-vi6886:ice_congrats-vi6886:ice_congrats-vi6886

:thumbsup::thumbsup: On the other hand, and just thinkin out loud here,,, I KNEW there was a definable reason that @Flyinfool has been working so hard on Jet Propulsion air craft.. WWW delivery system? :guitarist 2::guitarist 2: An FYI,, I been harassing him about development of High Temp White Wash, yesterday I was standing outside in 42 degree temp and it was like crazy, today it was 31 degrees and (still is). WTTW,, never underestimate what may be going on between those two peeked on that lop eared varmints head:Cool_cool36:

:dancefool::dancefool::dancefool::dancefool::dancefool::dancefool::dancefool: Ahhhhh,,, ought ohhhhh,, just checked the weather radar,,,, looks like your attention span being drawn away from the WWW didnt last long ya lop eared varmint ....

Go in the bedroom, unlock the gunsafe, grab the 1911, go shoot a couple rounds and see where the casings landed = perfect recoil spring tension should put em out a 5 feet. Now go to ebay and order a full set of springs = 7 pds to 24 pounders and start tuning.. CONGRATS ON THE RETIREMENT SLY!! Don't worry about finding things to keep you from getting bored,,, things to keep that from happening WILL FIND YOU!!!

:no-no-no::no-no-no::no-no-no: never ever under any circumstances share your riding plans in the same thread that you mention @Flyinfool and the WWW .. Go riding = YES,, post pics of the ride on the club house walls afterwords = ABSOLUTELY, harrass Fool when the ride is ALL DONE = TO INFINITEY AND BEYOND!! But I gotta tell ya brother,, you are walking on mighty thin Wisconsin White Wash covered ice when you put em both in the same post... :guitarist 2::guitarist 2::guitarist 2::guitarist 2::guitarist 2::guitarist 2:

,,, WIN/WIN!!! When you need heat, just tap on the Blower switch to shut the motor off and wave your hand to move some air so the burner will light,,, easy peasy.. As cold as it gets around here, having to physically control the unit like that may keep you busy enough that your WWW plans for this winter will be set aside.. WIN/WIN... Sounds like that switch your tapping on is done.. Makes no sense that tapping on would seperate the contacts if they were being held in by a current flow. I would start there but,,, consider the source

One more thing before I do though,,,, Tip is standing behind me APPLAUDING your little paint can man message brother!!

Thats just cause you were outside in the WWW shed finishing up the tweek on those nozzles,,,, noticing that fluffin ya gave us today,, looks like ya about got er dialed in. Speaking of crazy stuff,,, you know what a good set of old school 0-1 Starrett Mics go for (talking real deal stuff,, like we used back in the 60/70's - not the fake stuff).. Look em up a second ago,, 600 bucks sound right Makes me feel like a dinasour, some great memories though,, I LOVED machining,,, would have never left itf the trades wouldnt have x3 my wage just for climbing steel to tig up a bunch of high pressure boiler walls. I gotta SHUT UP,, another one... :ignore::ignore::ignore::ignore:

GOOD QUESTIONS IMHO!! Gotta try and get this in here before Jeff or another Guru jumps in here. If I were doing this job, had a surface grinder in my pocket and needed shims cause I couldnt find new I would probably grab my old Starrett 0-1's, work off a good clean surface before I hit the magnetic clamp on the grinder and, choosing the most worn surface to grind on if there was one, run em down to tolerance needed by taking the stock off one side. Mic em up so I knew what I had, take the edge off the edges of the fresh grind if I had lost radius (maybe with a hone stone) and then I would place the shim in the bucket with the freshly ground surface facing downwardly into the bucket where it has nothing actually wearing on it. Leaving the factory surface upwardly in the cup would maybe leave a good factory surface to contend with the rotational wear/pressure from the cam lobes meeting them , at least in my grossly negligent back yard feeble mechanical mind Now lets see what the guru's say ,,, uuuuu hooooo,, @Flyinfool,,,

SHMOOOOOKIN CORPORAL NEWKIRK!! TKS!!!!

Bump,, but not a hard one like Tweeksis took us over when she took out that U-Joint,,,, just an itty bitty one to keep this thread active

You lop eared engineering marvel varmint walking around with a Surface Grinder in your right pocket .. Probably got a Bridgeport Mill in the left pocket and an Engine Lathe with all the tooling in your jacket When I grow up I wanna be just like my neighbor and buddy Flyinfool,, ,, minus the Wisconsin White Washer though cause I don't have ice in my veins :guitarist 2::moon: I think your offer to custom up some shims is awesome Jeff:thumbsup: .. The kind of stuff that makes being a club member here so much fun!!

Me and @videoarizona do our own maintainin cause we are two cheap geezers that actually like getting greasy :backinmyday:!! Of course, there is also that going and spending the money we save in resturants and on gas for the bikes but,,, yea,, basically its cause we are cheap :banana: and like working on bikes,,, and stuff :banana::banana:

Ohhhhh yeah,,, and @Flyinfool STILL has NO clue when we may head in the direction that he has those nozzles pointing for our Christmas party with the kids on the west coast :rasberry::rasberry::moon::moon: :nanner::dancefool::thumbsup:!! SOONER OR LATER HE WILL BE SWINGING BACK THIS HERE WAY AND WHEN HE DOES

Hey,,, wait minute here,, just checked the 2019 calendar :scratchchin::think::think: :

YES!!!!!!!!!!!!!!!!! Our last offspring wedding is June 1st!!! Tip, Trooper and I were HOPING something like this may happen!! YES!!!!!!!!!!!!!!!!!! Can't do more than a couple hours biking anymore (unless health changes occur:biker:) BUT: and NOW that it's on the calender and it's to late for da Boss to change his mind:

OOOPPSSSSSSSSS,,, I have NO idea how I that "Get the Chicken" Tiger vid snuck in there Bum,,, guess it was one of those typical Puc = "Wrong Hat" moments.. Anyway,,, YES DanL' did have that Blue was fastest flaw thingy happening but I forgave him like he would forgive me for posting that wrong vid.. Here is the CORRECT video I meant to post.. Once again,,, dedicated to my brother and friend, Yammer Dan:

THANK YOU LARRY and a VERY MERRY CHRISTMAS RIGHT BACK AT CHA BROTHER!!

And a VERY Merry Christmas right back at you Graywulf,,, all the wayyy from snow covered West Michigan U.S.A. from Puc and Tip who still refer to that Christmas Ham as: :big-grin-emoticon::big-grin-emoticon::big-grin-emoticon::big-grin-emoticon::big-grin-emoticon::big-grin-emoticon::big-grin-emoticon:

Besides Sir Bob being the REAL (another HUGE thank you for loaning me your cape my friend),,, I KNEW there was something very special about that @Dragonslayer !!!! HAPPY BIRTHDAY BROTHER!!!!!!!!:thumbsup::thumbsup:

Thank you Bossman and Eileen and a VERY MERRY Christmas to both of you!! Tip and I also want to join others in sharing a HUGE MERRY CHRISTMAS wish with all of our club members here on VR and also to those who follow our clubs forums as innocent bystander non members = MERRY CHRISTMAS TO ALL!! And finally, here is a short Christmas video that I put together for my dear brother @yammerDan a number of years ago that he really enjoyed. I KNOW Dan LOVED being part of our VR family and I miss his adventurous and often compelling input here on the site as well spending much time with him in the clubs penalty box and also some awesome phone conversations he and I had,,, and getting to ride with him too = miss ya bro, especially this time of year.

Right back at you and yours my greasy french fry sharing brother!! MERRY CHRISTMAS from your family here in FURRREEEEEEZING Michigan!!!! and here is a Christmas video of ours that I think you may get a kick out of!!

even if their ruby red cheeks are frozen solid from __________

Back at cha Mama!! Wishing you and your 1st Husband nothing shy of the VERY best Merry Christmas's EVER!!! :thumbsup: Same for to ALL you lop eared Deck The Halls VR club member :biker:varmints!! What da heck,, it's Christmas,,,,, this Christmas wish is also for the likes of that lop eared Wisconsin White Washin, ice in his veins varmint neighbor of mine too!!!