[Moped Looking for Part of 99 RSV wheel!]

Check with Mike Eykamp or Ed Williams. Chances are one of them will have that part.

 

Sent from my SM-N920V using Tapatalk

[What a cool project vehicle]

Not sure I'd trust that welding job!

 

Sent from my SM-N920V using Tapatalk

[Sealant for vl\alve cover gaskets]

I'm installing a new rear valve cover gasket, have the old gasket out and the sealing surfaces cleaned up. Last time I did this I used RTV silicone to seal the halfmoon area on each end of the head and after several years it was leaking again. Idon't have any RTV on Hand, but I do have a tube of Yamabond 4 semi drying liquid gasket, will the yamabond 4 work with the new rubber gasket?

[Radio remote control housing.]

Yikes!

Obviously not a connector problem!

Good luck...

 

Thanks, I was able to patch it up again with some epoxy putty. Maybe Ill get by for a while.

[Radio remote control housing.]

What's wrong with yours, Jay?

 

All the problems I've heard of stem from a dirty or loose connector inside the fairing at the radio junction. Mine freezes up and doesn't work until I take the connector apart and clean it good.

It's pulled loose from the mounting plate and pieces of the plastic housing that secure the screw ferrels are gone. I think it was caused by brake fluid that splashed on it while bleeding the clutch several years ago. I'm trying to repair it again, but eventually I'm going to need a new housing or a complete remote.

 

Sent from my SM-N920V using Tapatalk

[Radio remote control housing.]

I am looking for a non functional radio remote control to use for parts, if you have one , let's talk.

 

Thanks.

 

Sent from my SM-N920V using Tapatalk

[ignition switch bolt size ?]

Maybe you should measure the bolts you just removed. Or am I missing something?

zag

 

I didn't have one out when I posed the question. The answer is 8x1.25x25mm

[ignition switch bolt size ?]

Time to repair my ignition switch, , what size bolts do I need when I reinstall the switch?

[Before I go any further...advice on pulling wheels.]

@cowpuc I thought you would have stopped at the first rest area and started swapping parts! We all know you don't like shiny things.

 

Sent from my SM-N920V using Tapatalk

[Moonshiners 28]

May I suggest that while you're there you see it all??? No sense in missing anything, get your monies worth.

Have a great ride!!

Hello Carl,

Its Not to far from home, if I miss anything I can always go back again

 

Sent from my SM-N920V using Tapatalk

[Moonshiners 28]

We are going to run the Moonshiner 28 this morning, any suggestions on what to stop and see along the way? We will be riding it from the south end to the north.

 

Sent from my SM-N920V using Tapatalk

[The Kind of Gal I Am.]

Yes, and the guys in those little houses are on a first name basis. I guess they just love to talk with me when I come to visit!

 

Sent from my SM-N920V using Tapatalk

[We had our first deer hit.]

Glad to hear Sharon's foot isn't broke and that you're back in the saddle already. Between Mike and Ed they probably have what you need to fix the scoot.

 

Sent from my SM-N920V using Tapatalk

[We had our first deer hit.]

Welcome to the club. I took one out back in 2010 , dusk coming north out of Red Lodge,MT. Wifey on the back, trailer in tow, sent the deer ass over tea kettle into the woods ! We stayed up, bike fender, passing lamps, signals and light visors all mangled [emoji21] Pulled the fender off the tire and finished our 2 week tour. This was all after Mr. Groundhogs met my front tire on our ascent of Beartooth Pass. My buddy that lives out there said he was going to report me for hunting without a license! [emoji1787]

 

Sent from my SM-N920V using Tapatalk

[where is PUC]

The flooding in Michigan is not near Puc's home. Most likely he's CTFW or family obligations.

 

Sent from my SM-N920V using Tapatalk

[If not bad luck no luck!!]

Sorry for your troubles!

I just got a call from my son saying a tree fell on his Mom's (my ex) new house, collapsing her utility shed and puncturing her home's roof. She is living in the mountains close to Hendersonville. About 20 years ago, a big pine fell on her house in Raleigh collapsing the roof. Those trees look nice but are dangerous.

Probably the same tornado that passed within 1 mile of our house Sunday morning at 3:45 am.

 

Sent from my SM-N920V using Tapatalk

[Trying to help another Yamaha rider.]

Thanks, I'll forward that item number to him. [emoji1360]

 

Sent from my SM-N920V using Tapatalk

[Trying to help another Yamaha rider.]

Have a friend of a friend who just bought a Stryker and is wanting to put a batwing fairing on it. Does anyone know of a setup he can use, new or used?

 

Sent from my SM-N920V using Tapatalk

[How is Everyone Doing?]

All is well here in Upstate South Carolina. Jeannie and I are virus free and hope to stay that way.

 

Lots to do around the new place, ridding the woods of thorny vines, grape vines and Holly trees. Replaced all the facia on the house, new roof, gutters go up next week. Whew,,,,, think I'll go for a ride.

 

Ý'all stay safe.

 

Sent from my SM-N920V using Tapatalk

[What's really going on here?]

Came across this just after my last post.

 

A top scientist with four degrees from the Massachusetts Institute of Technology said he believes the "deep state" is using the coronavirus pandemic for its own agenda.Shiva Ayyadurai said that the chronic “fear-mongering” over the outbreak was being used to push an agenda.Ayyadurai said on Twitter:“As an MIT PhD in Biological Engineering who studies & does research nearly every day on the Immune System, the #coronavirus fear-mongering by the Deep State will go down in history as one of the biggest fraud to manipulate economies, suppress dissent, & push MANDATED Medicine!”

 

READ MORE: https://neonnettle.com/news/10674-top-mit-scientist-deep-state-using-coronavirus-to-spread-fear

[emoji2398] Neon Nettle

Hit the nail on the head there Unc,

 

Sent from my SM-N920V using Tapatalk

[Prayers Needed for Freebird]

Don, get well soon my friend, Listen to the docs, most importantly listen to Eileen. Don't make us come and take all your keys away! Those stairlift jobs are not important, your health is !

 

Sent from my SM-N920V using Tapatalk

[Trying to get in touch with Carbon One]

I am trying to reach Larry AKA Carbon One. There is a fellow rider in need of a trailer hitch, I do not have direct contact info for Larry, I have tried email through the forum, PM through the forum and also instant messenger through FB, but no reply yet. If anyone has a direct number to him, I would appreciate it, if you could give him a ring and let him know.

 

Thanks

I texted him with a link to this thread.

 

Sent from my SM-N920V using Tapatalk

[Trying to get in touch with Carbon One]

He can be.reached at

 

ljskeels@att.net

 

Sent from my SM-N920V using Tapatalk

[Now I done it.......]

ITS HEEErrreeee!!!!

Still in the shipping box, I have to finish the electrical for outlets and lights to where it will reside. Then I have to build it.

So what printer did ya get? We had 4 3d printers at the school, I never did get the chance to play with them before I left there.

 

Sent from my SM-N920V using Tapatalk

[Now I done it.......]

It will be a few weeks before I head home from Florida so you'll have plenty time to play with that cool new toy.

 

Sent from my SM-N920V using Tapatalk