Kohburn

44* this morning. broke out the heated gloves for the ride to work.

high of 81 yesterday then some crazy wind last night and its 50 today

mid 70's and scattered clouds here on the beach in Carolina

both the R1 and Warrior calipers? or the R1 calipers and warrior master cyl? following closely as I was just about to pull the trigger and buy the parts for this swap.

I like that a lot liquid cooled was one of my requirements when looking into getting my first cruiser. that's how I ended up here in v4 territory

mine is in any gear and all speeds but only under load. it varies in pitch with rpm

I haven't looked at beveling gears, but if you have a spare basket from an 09 then that would be the first thing I did was that swap. if that doesn't work then maybe look at this solution that is my current plan to try. Running an oil line to the housing to better lube the gear teeth. https://www.venturerider.org/forum/showthread.php?119593-YES-WHINE-is-GONE-I-Finally-did-IT-PUT-OIL-line-to-THE-DRIVE-gear-on-Clutch-housing

or at least direct contact, doesn't take long to make it brittle

it took me a little while, but I found them in plain site

something like that. worth a shot I guess. I can't quite imagine another way of doing it without looking at mine. I'll check at lunch when I go out to the parking lot.

can you detach the bracket from the lid and rotate it out of the way?

I was really glad that we didn't get the flooding in Morehead from Dorian that we had from Florence. my garage is a flood zone so I built flood walls trying to seal off the doors this year. thankfully didn't need them.

I've had great success with the 705s as well as the 804/805 on my versys. I think i'll give the 777's a go on the rsv

somehow missed that thread, definitely subscribing to that one so I don't lose it.

every link to a picture I've found so far seems to be a dead link. would love to see what they actually looked like. might give me some ideas. I do a lot of 3d printing and have access to some pretty fancy commercial units as well. making an adapter is the easy part. finding the right gauges is turning out to be tough as none really have the look I want.

went ahead and paid for the membership. I've only had the bike for a week and the forum has already been plenty helpful to make it worth while.

is that the shinko 777 ? I was thinking about doing the same.

added a 3 mini fuse box by the battery, ran a fresh line up to the fairing, a relay triggered by the 12v accessory plug, and a switch power terminal block inside the fairing. from there I added a wireless phone charger/mount, and a plug for my gerbings heated gear off the new switched power supply. I'll be replacing the tape deck with a Bluetooth adapter when that shows up in the mail.

any hints on what to search for? I've been browsing through accessories for 99-13 rsv's and haven't noticed anything like that. in the mean time I've been going over the bike and found how easy it is to remove the clear lower deflectors and drop on a short windscreen in the summer. I added a relay power block with my wireless phone charger and the plug for my heated gear tapped off of it so I had the front fairing off looking over it all.

yeah right next to the tachometer in the old cassette slot

I've been trying to search on this also. I don't like not having a tachometer. digital would be an easy fit - i'd rather have a bar graph than numbers though. what is the Ponch cassette player adapter ?

its been hot every day since I got tags on my new to me RSV - I underestimated how much hotter it is riding a bike with as much faring coverage as the RSV has than an adventure bike. a little brutal the last few days but it will pay dividends riding through the winter.